氮掺杂氧化钛的简易制备及可见光催化活性的研究

为开发对可见光响应的催化剂,以尿素为氮掺杂剂,采用简易溶胶-凝胶法制备氮掺杂氧化钛,并以2,4-DCP的降解检验其光催化活性。XRD、BET、XPS和UV-Vis漫反射光谱分析表明,随着氮/钛原子比（N/Ti)的增大,各催化剂晶粒尺寸减小,比表面积增大,锐钛矿相向金红石相的转变得到抑制,除0#样品出现金红石相外,其他催化剂均只出现锐钛矿相;掺入催化剂的N位于晶格O位点和晶格间隙,替代N和间隙N掺杂使催化剂的光吸收发生明显的红移。荧光光谱分析表明,当N/Ti在0～6范围内增加时,反应体系中·OH自由基的产生速率增加,当N/Ti增大至8时,速率则下降。相似的规律也表现在氮掺杂量对光催化活性的影响。适量氮掺杂能增强氧化钛的可见光催化活性,该改性催化剂可用于有机污染物的太阳光激催化降解。     

稀土在废水处理中的应用进展

综述了国内稀土金属在废水处理中的最新应用进展,总结了稀土复合吸附剂的制备方法及其在含磷、氨氮、砷、氟、铬、镉等废水处理中的效果,讨论了稀土复合混凝剂和稀土催化剂在染料、助剂、化工等高浓度有机废水处理中的应用,为找到高效环保的处理工业废水的方法提供了依据.     

燃煤电厂SCR烟气脱硝技术的研究

选择性催化还原(SCR)技术是目前燃煤电厂应用最多且最成熟的烟气脱硝技术.介绍了SCR烟气脱硝技术的化学反应机理、工艺流程等,重点对影响SCR法脱硝效率的多种因素进行了深入分析,并对SCR技术的未来研究方向进行了展望.     

火电厂SCR烟气脱硝催化剂特性及其应用

SCR工艺是火电厂的主流烟气脱硝技术,催化剂是SCR脱硝工艺的核心。通过对不同型式催化剂特性及其应用的对比分析,得出了蜂窝式催化剂综合性能较优的结论,并对不同烟气条件下的催化剂选择提出了建议.     

火电厂SCR脱硝系统旁路烟道的不利影响分析

对火电厂SCR脱硝系统设置烟气旁路通道的必要性进行了论述,分析了SCR系统设置旁路烟道的经济性、安全性以及可能出现的不利影响。     

炭催化剂吸附剂标准物质的研制

本文介绍了炭催化剂吸附剂标准物质的研制过程。对标准物质的制备技术、均匀性检验、稳定性考察及定值和不确定度进行了逐项分析。采用活性炭浸渍、煅烧技术制得炭催化剂吸附剂标准物质。试验结果表明,该标准物质定值结果准确,均匀性、稳定性良好。铜含量的标准值为11．06％,扩展不确定度为0．13％。     

煤的低温氧化实验研究及红外光谱分析

对不同温度下的氧化煤样通过红外光谱分析其微观结构及特征,得到煤样在不同低温氧化阶段的基团变化,从微观角度掌握煤样氧化过程的变化规律.通过对唐口煤矿1302工作面煤样的低温氧化和红外光谱分析,得到唐口煤矿煤样在低温氧化阶段的自燃倾向性和氧化过程中微观结构的变化规律,该成果为制定矿井内火灾的防治技术提供了科学依据.     

A preliminary process design and economic assessment of a catalyst rejuvenation process for waste disposal of refinery spent catalysts

Spent hydroprocessing catalysts from refineries have been classified as hazardous solid waste by the United States Environmental Protection Agency (USEPA), refiners must find a viable but economical solution to solve this serious environmental issue. Catalyst rejuvenation is an attractive option for minimizing the environmental problems associated with spent catalysts. In this study, a preliminary design for such a process and the corresponding economic analysis are performed to assess the proposed catalyst rejuvenation process for metal-fouled spent catalysts generated in residue hydroprocessing units. The scenarios used in the economic assessment are based on three options of process synthesis and two operator modes. It is found that the option of rejuvenating medium and lightly fouled spent catalyst produced by the refinery will be the best solution for refiners, both environmentally and economically.     

Enhancement of turbulent scalar mixing and its application by a multihole nozzle in selective catalytic reduction of NOx

The mixing characteristics of a passive scalar in the turbulent flow of a selective catalytic reduction process were numerically and experimentally investigated, focusing especially on an injection nozzle with multiple holes for the reducing agent. The multihole injection nozzle studied has six holes that are perpendicular to the ambient flue gas flow and are located near the tip of the nozzle. Large eddy simulation was applied to the turbulent flow and mixing fields to elucidate the mixing mechanism of the proposed nozzle compared with the single-hole nozzle that is commonly used in the conventional selective catalytic reduction process. From the results, there exist broader regions of higher turbulent intensities for the multihole nozzle than for the conventional single-hole nozzle. These regions are well matched with the positions of high vorticity in the near upstream region of the jet flow issuing from the multiple holes of the nozzle. Consequently, the high turbulent intensities and vorticity magnitudes lead to intensified mixing between the flue gas and the reducing agent. Hence, the most suitable molar ratio between NOx and the reducing agent for the catalytic reaction can be easily obtained within a shorter physical mixing length as a result of the enhanced scalar mixing. Finally, the numerical results were applied to a trial design version of a multihole nozzle, and this nozzle was experimentally tested to confirm its mixing performance.     

双负载双金属催化剂催化有机卤化物水相脱卤研究

通过把起相转移作用的聚乙二醇链固载在硅胶上（SiO2-PEG600）,再将聚乙稀吡咯烷酮（PVP）络合双金属Pd-Cu(PVP-PdCl2-CuCl2)后负载其中,制成一种新型双负载双金属水相脱卤催化剂PVP－PdCl2-CuCl2/SiO2-PEG600。以甲酸钠为氢转移试制,在水相中催化有机卤化物脱卤,研究结果表明：反应温度为800℃,Pd∶Cu=2∶1（摩尔比）,反应介质pH≈11.7左右时,该催化剂对芳香氯化物及α－氯代酮、酯具有良好的催化脱氯和重复使用性能。