地震应急的影响因素分析

本文在理论分析、国内外历史震例和救灾案例研究的基础上,同时参照我国的相关政策和法律法规文件,对影响地震应急(包括震前准备和震后应急行动)的因素进行了初步分类,并系统讨论了这些因素影响地震应急的方式、途径和程度.以期为地震应急的理论研究和地震应急的实际工作提供部分补充和指导.     

Neurophysiological Effects Induced in the Nervous Tissue by Low-Frequency, Pulsed Magnetic Fields

Summary The influence of pulsed magnetic fields (PMF) on the properties of nervous tissue was investigated. Hippocampal slices or synaptosomes obtained from hippocampal tissue were used as model systems. The amplitude of potentials recorded in vitro from one of the hippocampal pathways (Schaffer collaterals that use glutamate as a neurotransmitter) was employed as a measure of the influence of magnetic fields on synaptic efficiency. The synaptic glutamate turnover and radioactive calcium accumulation were used as markers of the PMF influence on biochemistry of synaptic mechanisms. The exposure of hippocampal slices for 30 min to PMF amplified evoked potentials. While the frequency of 0.16 Hz exerted the strongest effect, lower (0.01, 0.07, 0.03 Hz) and higher (0.5 Hz) frequencies were much less effective. The enhancement of the neuronal excitability was correlated with significant increase in the neuronal spontaneous activity mediated by electrical synapses. The PMF-induced changes in the excitability of the tissue were accompanied by an increase in the synaptic turnover of glutamate. The release of radioactive D-Aspartate (a glutamate analog used as a marker for glutamate turnover) from the slices, and its uptake by synaptosomes were enhanced, and reduced respectively, following the stimulation with pulsed magnetic fields. The frequency which was the most efficient in amplification of evoked potentials (0.16 Hz) was also the most effective in the modulation of the release and uptake processes. The PMF-induced changes in neurotransmitter turnover coincided with an increase in ⁴⁵Ca²⁺ accumulation observed in hippocampal slices exposed to PMF.     

一种导电混凝土的制备及其电阻率测量

本文综述了导电混凝土的发展以及应用情况，提出了用导电混凝土作为接地材料的设想，并选择氧化铁粉作为骨料，添加适量碳粉配制了一种导电混凝土来验证。通过改变不同的配比制作导电混凝土模型，用四电极法测量其电阻率，得出碳粉比例对其电阻率的影响。     

A transportation network assessment tool for hazardous material cargo routing: Weighing exposure health risks,proximity to vulnerable areas,delay costs and trucking expenses

The inherent risks associated with accidental releases of hazardous materials during transport have drawn attention and concerns in the recent decades. The aim of this study is to propose a tool for evaluation and comparison of the transportation networks which can be used to assess the routing options between origins and destinations of the cargos for their suitability for transporting hazardous material cargos by tanker trucks and to identify routes which provide lower accidental release risks, lower public exposure risks, and offer economical benefits. Each route segment of transportation networks were evaluated using specific criteria which included health risk and cost of delay in case of an accidental release of materials, trucking cost and proximity to vulnerable areas. Since, the health impact of hazardous materials differ depending on the characteristics of the material being transported as well as release quantities and atmospheric conditions; this paper aimed in providing a tool that can be used to estimate the impact radius (for health risks) after accidental release of hazardous materials by taking into account different atmospheric conditions based on the meteorological data and solar elevation angle. The Gaussian air dispersion model paired with ArcGIS using Python programming were employed to estimate the health risk impact zones by considering the meteorological data, and accordingly to analyze road segments for cost impacts (delay and trucking costs), and the proximity to vulnerable areas. The route assessment tool was demonstrated with a case study. The results of this study can efficiently aid decision makers for transportation of hazardous materials.     

氢安全研究现状及面临的挑战

氢能具有储运便捷、来源多样、洁净环保等突出优点,许多国家把发展氢能作为重要的能源战略。氢安全是氢能大规模商业化应用的重要保障。在分析国内外氢安全领域近年来最新研究进展的基础上,依次从氢泄漏与扩散、氢燃烧与爆炸、氢与金属材料相容性及氢风险评价等方面,系统总结了国内外氢安全研究面临的挑战,并对我国氢安全的发展提出了建议。     

SBR加载不同粒径磁性活性炭对其污泥颗粒化进程的影响机制

在相同序批式活性污泥反应器(SBR)中分别加载1.5 g·L~(-1)的80、140、200、和300目不同粒径的磁性活性炭(反应器编号依次为2、3、4、5号),同时以不投加磁性活性炭的SBR反应器(1号)作为对照组,研究各反应器污泥体积指数(SVI)、粒径分布特征、胞外聚合物(EPS)中胞外蛋白(PN)、胞外多糖(PS)的含量变化规律以及除污性能.结果表明,不同粒径磁性活性炭对污泥颗粒化进程有一定的影响,粒径过大、过小对促进污泥颗粒化进程的强化作用不明显,当磁性活性炭的粒径为140目和200目时,活性污泥很容易以其作为"成核"载体快速形成好氧颗粒污泥,并且形成的颗粒污泥结构紧密,沉降速率快.采用高斯函数分析污泥粒径分布和标准偏差发现,反应器运行的第50 d,3号和4号反应器内污泥平均粒径均达到了780μm以上,明显高于其他反应器,标准偏差分别为318.9μm和362.3μm,两反应器内形成的颗粒污泥粒径较均匀,处理系统较稳定.与此同时,投加不同粒径的磁性活性炭均有利于促进污泥胞外蛋白质PN含量的增加,对胞外多糖PS的含量影响不大;但合适的磁性活性炭粒径(140目和200目)越有利于污泥PN的分泌,颗粒化程度明显的3号和4号反应器的PN/PS比值均高于其他3个反应器.磁性炭基好氧颗粒污泥的形成符合"惰性内核模型".此外,3号、4号反应器对废水TN和TP的去除率分别达到50%和60%以上,均高于其他反应器.     

75t/h燃煤锅炉汞迁移转化规律研究

通过对2台75 t/h循环流化床锅炉烟气中汞排放浓度、燃煤和其他固体副产物中的汞含量进行测试,分析了燃煤大气汞的排放因子,并建立了燃煤汞的质量平衡。结果表明:燃煤锅炉中,大部分汞主要存在于烟气和脱硫副产物中,燃烧后进入炉渣、飞灰中的汞含量较少,低于5%。燃煤汞排放去向与脱硫除尘控制技术有关,不同控制技术协同除汞的效果差异较大,而单质汞是燃煤锅炉汞污染防治的重点和难点。     

磁性PEI功能化秸秆的制备及对Pb (Ⅱ)的吸附

为获得同时具有优良的吸附性能和磁分离特性的生物吸附材料,以汽爆秸秆为基质,采用戊二醛交联剂法制备了磁性聚乙烯亚胺功能化秸秆吸附剂（Fe₃O₄-PEI-RS）,通过SEM、XRD、FTIR、XPS和VSM等手段表征了材料的结构和性质,测定了Pb（Ⅱ）在Fe₃O₄-PEI-RS上的吸附性能,考察了pH、吸附时间、吸附剂投加量、Pb（Ⅱ）初始浓度、温度等因素对吸附的影响.结果表明,Fe₃O₄-PEI-RS对Pb（Ⅱ）的吸附具有强烈的pH依赖性;吸附时间对Pb（Ⅱ）的吸附效率有明显的影响,在180 min时吸附达到平衡,吸附过程符合准二级动力学模型;Langmuir和Freundlich模型都能很好地描述Pb（Ⅱ）在Fe₃O₄-PEI-RS上的吸附行为,20、30和40℃时最大吸附量分别为192.31、200.00和212.77 mg/g;热力学参数△G < 0,而焓变△H>0、△S>0,说明该吸附属于熵增加的自发吸热反应过程,升温有利于吸附.重复试验表明,EDTA作解吸剂,经5次吸附/解吸附循环后吸附剂仍能保持较高的吸附容量.研究显示,所制Fe₃O₄-PEI-RS对Pb（Ⅱ）具有较高的吸附容量,稳定性好、可循环利用,能在磁场下实现快速分离.      

复合生物阴极型微生物燃料电池处理废水及同步产电性能

为研究生物阴极在MFC（微生物燃料电池）中的应用,分别以粒径为2~4 mm的颗粒活性炭和粒径为2~4、4~8、8~12 mm的颗粒石墨为阴极基质材料,构建升流复合生物阴极型单室MFC,研究阴极基质材料的种类和粒径对MFC的产电性能和净水效能的影响.结果表明:当阳极基质材料为2~4 mm粒径的颗粒活性炭时,燃料电池中利用玻璃纤维取代离子交换膜,阴极基质材料为选用4~8 mm粒径颗粒石墨的反应柱产电量最大,为534 mV（外电阻为1 000 Ω）,最大功率密度达到631.6 mW/m3,库伦效率为3.82%;阴极的pH越低越有利于阴极的产电反应;不同阴极基质材料的MFC对COD_Cr去除率均在80%左右,TN、NH₄+-N及TP的去除率最高可分别达到79%、93%和34%.研究显示,阴极基质材料的种类和粒径对MFC的产电性影响较大,但对其净水效能的影响不大.      

自适应智能电磁防护材料测试方法研究

目的在强电磁场环境下研究自适应智能电磁防护材料的相变特性。方法针对自适应智能电磁防护材料相变前后电导率的变化范围大、需要强场激励状况,考虑测试系统强场生成、大动态范围、测试精度以及相应的绝缘性和较高的安全性要求,采用电容充放电原理设计强场激励测试电路,搭建绝缘环境,确保操作的安全性和测试数据的可靠性。结果利用测试系统对现有商业化电阻器进行验证试验,得到的特性曲线与理论相一致。结论测试系统能够满足自适应智能电磁防护材料相变特性试验的需求,可获取有效且可靠的测试数据。