煤矿瓦斯爆炸事故的应急救援物资调度模型研究

矿井瓦斯爆炸事故是煤矿安全生产中最严重的事故之一.为确保事故后应急救援的高效开展及减少应急物资调度过程中的经济损失,在以调度时间为第一的前提下,结合煤矿瓦斯爆炸事故实际,引入伤亡性和经济性两个优化目标,构建了一种在多出救点、多物资和多受灾点约束条件下的多目标应急物资调拨模型,并运用加权算法基本思想,确定了决策效用函数,同时结合瓦斯爆炸事故的时间紧迫度,在保证物资连续消耗的条件下,求解最优物资调度方案,并通过实例验证了可行性.     

恐怖袭击引发的危险品运输事故人员疏散范围研究

针对恐怖袭击引发危险品运输事故人员疏散的特性,构建了危险品运输事故人员疏散范围模型.在恐怖袭击条件下,以瞬时泄漏高斯扩散模型、蒸气云爆炸模型、BLEVE火球动态计算模型作为不同事故场景后果评价模型,考虑恐怖袭击特性,引入恐慌系数对模型进行修正,并提出不同危害等级对应恐慌系数的度量方法,继而构建恐怖袭击下危险品运输事故的人员疏散范围模型.实例计算结果表明,所建模型合理可行,泄漏事故的人员疏散范围近似椭圆状,其影响范围近似气球剖面,且随与事故中心距离增加而扩大.垂直于下风向的横向扩散距离先增大后减小.爆炸事故和火灾事故人员疏散范围呈圆形分布,爆炸冲击波超压和火灾热辐射剂量与到事故中心的距离呈幂律递减规律.对比分析发现,恐怖袭击条件下的人员疏散范围比常规条件下的人员疏散范围大,并且疏散修正面积随与事故点距离增加而减小.     

EPS外保温材料火灾蔓延速率的数值模拟与试验研究

根据火灾动力学理论,建立了热塑性外保温材料火蔓延速率模型。该模型对实际燃烧过程做了一定的假设简化,主要考虑了材料厚度和火源位置对材料燃烧发展过程的影响。并提出无量纲参数"耦合燃烧度",用来表征热塑性材料的燃烧壁面与高温熔滴形成的油池火之间相互作用的程度。基于ISO9705全尺寸热释放速率实验室,采用20×20×10 cm3正庚烷油槽火源为火源样式,设计了4种不同的燃烧工况研究EPS外保温材料的火蔓延规律和影响因素。结果表明:其火蔓延速率随时间变化呈指数增长,EPS的火蔓延速率的回归方程通式为Vp(t)=Aexp(Bt),与理论推导方程Vp(t)=φ1exp(φ2t)有较好的相关性。当EPS的厚度为50 mm时,火蔓延速率增幅最小;"耦合燃烧度"越大,火蔓延速率增长越快;"耦合燃烧度"随材料厚度的增加而增大;不同火源位置下,"耦合燃烧度"从大到小为中火、底火、顶火、边角火。理论模型与试验结果有较好的一致性,可以有效预测热塑性外保温材料的火蔓延速率。     

用于有机磷农药固相萃取的吸附材料的研究进展

有机磷农药由于在环境中相对于有机氯农药容易降解,而成为全球范围内使用最广泛的杀虫剂。尽管有机磷农药已经被证实了低环境持久性,但由于具有生物毒性、高毒性、再生毒性、免疫毒性和基因毒性,造成的残留仍能对人类健康产生危害。样品前处理是有机磷农药残留分析过程的重要步骤,该过程耗费时间,其好坏直接影响整个分析结果的准确性。固相萃取相对液-液萃取由于具有诸如快速、简单和绿色环保的特点及较强的选择吸附性,是目前应用最广泛的农药残留分析样品前处理技术。吸附材料是决定固相萃取过程效能的关键因素。文章介绍了常见的硅吸附材料、碳吸附材料、分子印迹吸附材料及磁性吸附材料在有机磷农药固相萃取领域的研究应用现状,同时对未来研究方向进行了展望。     

广州珠江表层沉积物中石油烃分布特征研究

对珠江广州段7个采样点的表层沉积物中的石油烃浓度进行了测定,结果表明广州珠江表层沉积物中的石油烃污浓度水平在288.62~725.13μg/g之间。市区南航道、后航道浓度相对较高,前航道黄埔涌口(Ⅶ号点)附近石油烃浓度已接近海洋第二类沉积物标准值;西航道至前航道和南航道、平洲水道至后航道沿程石油类浓度与有机质含量逐渐升高,说明广州市区是造成石油及有机污染的主要区域。与有机质含量及沉积物粒度的相关性分析发现,表层沉积物中石油烃浓度与有机质水平存在非常显著的正相关关系(相关系数r=0.987,P<0.01);与粘粒组分存在显著的正相关关系,相关系数(r=0.885,P<0.05),而与砂粒组分成非常显著的负相关关系(r=-0.919,P<0.01)。     

木质素磺酸盐基生物质固沙材料的部分生物效应

将制浆造纸废液中的木质素磺酸盐经过化学改性制备成生物质固沙材料BSSM-LS,可达到治理污染,有效利用资源和防风固沙、抑尘等多重效果,但在应用过程中,为避免对生态环境造成危害,必须关注其环境生物效应。文章首先选择具有代表性的小白菜和高羊茅草进行了种子萌发的试验,结果表明,BSSM-LS对植物生长无有害影响,反而由于补充了氮,对种子的萌发起到了良好促进作用。随后进行的BSSM-LS与白腐菌及其酶相互作用的研究表明,BSSM-LS对裂褶菌Schizophyllum commune无有害影响,对漆酶无抑制作用。在自然条件下,BSSM-LS生物降解仍需要较长时间,接种白腐菌后可加速其降解过程;在漆酶作用下BSSM-LS可发生一定程度降解,表现为分子量减少,磺酸基含量下降,共轭羰基和醌型结构增加,有利于BSSM-LS的腐殖化进程。     

Effectiveness and application of modified wind turbine coating: Adding ionic liquids to titanium dioxide and diatomaceous earth

Wind turbines are a green energy source that Taiwan has been endeavouring to develop in the past five years. Excellent onshore wind farms have already been developed; however, offshore development is inevitable because of Taiwan's limited land area. With regard to energy sustainability, operation and trouble-free maintenance of wind farms are essential. If damage to fan components can be mostly prevented, the operating cost and maintenance time would be considerably decreased; thus, remarkable economic benefits could be achieved. An appropriate coating can help a structure resist the stress of the working environment and improve its durability, resulting in lower maintenance cost and less staff being required to perform on-site repairs. Diatomaceous earth (DE) has been widely used to produce composite porous materials. In this study, epoxy resin and titanium dioxide were mixed with DE to increase the hydrophobicity of the surface of coatings and provide them photocatalytic self-cleaning ability. The ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate was also added to the coatings to prevent the corrosion of coated metallic material. This study employed thermal analysis to investigate the thermal stability of the coatings and the corrosion resistance of coated iron blocks. Finally, a self-made quartz container was connected to a volatile organic compound detector, and sun exposure was simulated using ultraviolet light. The results confirmed that the modified coating retained its functionality under the harsh working environment and can be applied to the surfaces of large machinery used in offshore wind turbine towers.     

Construction utilization of foamed waste glass

Foamed waste glass (FWG) material is newly developed for the purpose to utilize the waste glassware and other waste glass. FWG has a multi-porous structure that consists of continuous or discontinuous voids. Hence lightweight but considerable stiffness can be achieved. In the present study, the manufacture and engineering properties of FWG are introduced first. Then, the utilizations of FWG are investigated in laboratory tests and field tests. Some case studies on design and construction work are also reported here. Through these studies we know that the discontinuous void material can be utilized as a lightweight fill material, ground improvement material and lightweight aggregate for concrete. On the other hand, the continuous void material can be used as water holding material for the areenina of around slope and rooftop, and as clarification material for water.     

精神支持与物质支持对建筑工人不安全行为影响对比

为向建筑工人提供更具针对性的支持,对比分析精神支持和物质支持的影响效果,分别构建精神支持和物质支持对建筑工人不安全行为的影响机理,基于351名建筑工人调查数据,采用结构方程模型展开实证研究.研究结果表明:精神支持和物质支持对建筑工人安全意识的提高和工作压力的降低都具有显著影响;相较于物质支持,精神支持影响效果更好,更能...     

Reality and risk of contact-type head injuries related to bicycle-mounted child seats

Objective

The authors have treated numerous children who have been injured by falling from bicycle-mounted child seats. Despite the greatly increased use of such seats, the understanding of their risk and the importance of helmet use remains alarmingly poor. The objective of this study was to confirm the risk of bicycle-mounted child seats and to evaluate the efficacy of helmets, seat belts, and back seat height in terms of preventing or mitigating contact-type head impacts that occur in falls from bicycle-mounted child seats.

Materials and methods

Biometrical dummy tests were performed to examine contact-type head injuries in falls from stationary bicycles. A bicycle with an anthropometric test dummy placed in a bicycle-mounted child seat was tipped over. Each test was repeated three times and three-dimensional acceleration was measured using accelerometer. Head Injury Criteria (HIC) were calculated and the respective influences of a helmet, a seat belt, and increased height of the back of the seat on such impacts were evaluated.

Results

Only helmets unequivocally lowered maximal acceleration and/or HIC values with statistical significance. The seat belt lowered HIC values as long as it was used with the high-back seat. Only when the dummy wore a helmet sitting in a high-back seat did the HIC show less than the threshold of 570 for three-year-old children. The HIC showed the lowest score of 161.5 when the dummy wore both a helmet and a seat belt sitting in a high-back seat.

Conclusions

Riders in bicycle-mounted child seats definitely have higher risks of contact-type head injuries. In transporting a child on a bicycle-mounted child seat, parents must use both a child-bicycle helmet and a high-back child seat at least; a seat belt is highly recommended as long as it is used with the other safety devices.

Impact on Industry

The bicycle-mounted child seat should have a high enough back and an appropriate seat belt to protect the head of the child from a contact-type injury.