水合物法的天然气提氦技术研究

氦气是发展国防军工和高科技产业不可或缺的战略性物资之一.由于氦气在自然界中的富集度很低,目前工业规模化提氦来源主要是含氦天然气.常用的提氦方法有吸附法、吸收法、低温冷凝法、膜分离法等,但它们都不能很好地解决提氦难度大、成本高、规模化工业应用水平较低等缺点.因此,引入水合分离技术,利用含氦天然气各组分生成水合物的条件差异在水合反应过程中对氦气提浓,同时辅以催化脱氢工艺,实现粗氦的精制.     

环境样品中汞形态分析技术的进展

汞的毒性、环境行为、生物有效性不仅跟其浓度有关,还决定于其化学形态,因此汞的形态分析在环境科学中具有重要意义。样品前处理几乎是汞形态分析研究中不可或缺的步骤,而色谱和光谱/质谱联用技术是目前普遍采用的分离检测方法。文章对近十年来这些方面的研究进展进行了综述,主要包括样品的前处理方法如酸/碱溶剂萃取、微波辅助萃取、固相萃取、固相微萃取、单滴微萃取、分散液液微萃取等,以及色谱(液相色谱、气相色谱)和毛细管电泳与光谱/质谱(紫外可见光谱、原子吸收光谱、原子荧光光谱、等离子体质谱等)的联用技术在汞化合物形态分析中的应用情况。最后提出今后应重点研究建立高效、简便的前处理方法,发展高分离度、高灵敏度、高速度的分离检测联用技术,以便更好地对汞的形态进行分析监测。     

磁暴对沿海核电站变压器安全影响的研究

磁暴产生的地磁感应电流(GIC)直接损伤变压器和间接干扰继电保护等设备,强磁暴可能威胁到电网的安全运行。为探明磁暴对沿海核电站变压器的影响,对第23太阳周峰年强磁暴侵害广东岭澳核电站、江苏上河变电站的GIC测量数据,以及西北陕甘青宁750 kV电网计算数据进行统计分析,研究沿海核电站与内陆变电站变压器GIC大小及其差异原因。结果表明,由于受海岸效应现象的影响,沿海核电站的变压器更容易遭受磁暴的侵害。在此基础上,对极端磁暴的可能危害、灾害风险以及沿海核电站的磁暴灾害进行评估,并建议核电站选址和变压器选型时应评估磁暴的影响。     

SGO改性复合纳滤膜的制备及分盐性能

近年来,水资源短缺,水源污染严重,国家对水处理末端的资源化利用提出了更高的要求,分盐过程也受到越来越多的关注.纳滤膜表面通常带有电荷,可以选择性地透过不同价态的离子.基于纳滤膜表面电荷特性不同,为很好地实现盐的分离,将制备的带有磺酸基团的氧化石墨烯引入到纳滤膜材料中,采用界面聚合法,制备了SGO改性复合纳滤膜. Zeta电位分析表明所制备的复合纳滤膜表面的电荷比不添加SGO的纳滤膜更负;红外光谱分析中酯基基团特征峰的出现表明磺酸基团参与了聚合反应; SEM结构表面,膜表面出现了明显的图灵结构,在0. 2 MPa压力下,纯水通量可达45. 85 L·(m~2·h)-1,对Na2SO4截留率为98. 23%,对Na Cl截留率为24. 93%,10 h运行可以很好地实现对SO_4~(2-)、Cl~-的有效分离,可实现盐的资源化回收.     

磁性有序介孔碳的制备及其对水中双酚A的吸附

采用水热法成功制备了磁性有序介孔碳（Fe-OMC）,用于吸附水中双酚A （BPA）.采用高倍投射电镜、X射线衍射仪、傅里叶红外光谱仪、比表面积分析仪和振动样品磁强计对Fe-OMC进行表征.结果表明,该吸附剂具备较大的比表面积、独特的有序介孔孔道结构、丰富的含氧官能团以及较强的超顺磁性.Fe-OMC能够高效地吸附去除水中的BPA,平衡吸附量可达72.62mg/g,经过外加磁场分离回收后依旧具备较好的吸附性能.随着BPA浓度从1mg/L提高到20mg/L,其平衡吸附量由8.33mg/g增至91.78mg/g.随着pH值的升高呈现出先降低后升高再降低的趋势,最高吸附量出现在pH=8（75.34mg/g）.Fe-OMC对BPA的吸附过程可用准二级吸附动力学模型和Langmuir吸附等温模型进行描述.计算的热力学参数表明,Fe-OMC对BPA的吸附过程是自发进行的放热过程.     

Functional flax fiber with UV-induced switchable wettability for multipurpose oil-water separation

● A PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed. ● The property of flax fiber could be switched from hydrophobicity to hydrophilicity. ● The mechanism of the acquired UV-induced switchable wettability was discussed. ● The developed flax fiber was successfully used for multipurpose oil-water separation. The large number of oily wastewater discharges and oil spills are bringing about severe threats to environment and human health. Corresponding to this challenge, a functional PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed for efficient oil-water separation in this study. The developed flax fiber was obtained through PAA grafted polymerization and then ZnO-HDTMS nanocomposite immobilization. The as-prepared PAA-ZnO-HDTMS flax fiber was hydrophobic initially and could be switched to hydrophilic through UV irradiation. Its hydrophobicity could be easily recovered through being stored in dark environment for several days. To optimize the performance of the PAA-ZnO-HDTMS flax fiber, the effects of ZnO and HDTMS concentrations on its switchable wettability were investigated. The optimized PAA-ZnO-HDTMS flax fiber had a large water contact angle (~130°) in air and an extremely small oil contact angle (~0°) underwater initially. After UV treatment, the water contact angle was decreased to 30°, while the underwater oil contact angle was increased to more than 150°. Based on this UV-induced switchable wettability, the developed PAA-ZnO-HDTMS flax fiber was applied to remove oil from immiscible oil-water mixtures and oil-in-water emulsion with great reusability for multiple cycles. Thus, the developed flax fiber could be further fabricated into oil barrier or oil sorbent for oil-water separation, which could be an environmentally-friendly alternative in oil spill response and oily wastewater treatment.     

Recent advances in antimony removal using carbon-based nanomaterials: A review

• The synthesis and physicochemical properties of various CNMs are reviewed. • Sb removal using carbon-based nano-adsorbents and membranes are summarized. • Details on adsorption behavior and mechanisms of Sb uptake by CNMs are discussed. • Challenges and future prospects for rational design of advanced CNMs are provided. Recently, special attention has been deserved to environmental risks of antimony (Sb) element that is of highly physiologic toxicity to human. Conventional coagulation and ion exchange methods for Sb removal are faced with challenges of low efficiency, high cost and secondary pollution. Adsorption based on carbon nanomaterials (CNMs; e.g., carbon nanotubes, graphene, graphene oxide, reduced graphene oxide and their derivatives) may provide effective alternative because the CNMs have high surface area, rich surface chemistry and high stability. In particular, good conductivity makes it possible to create linkage between adsorption and electrochemistry, thereby the synergistic interaction will be expected for enhanced Sb removal. This review article summarizes the state of art on Sb removal using CNMs with the form of nano-adsorbents and/or filtration membranes. In details, procedures of synthesis and functionalization of different forms of CNMs were reviewed. Next, adsorption behavior and the underlying mechanisms toward Sb removal using various CNMs were presented as resulting from a retrospective analysis of literatures. Last, we prospect the needs for mass production and regeneration of CNMs adsorbents using more affordable precursors and objective assessment of environmental impacts in future studies.     

小型四旋翼无人机悬停状态气动干扰与安全间隔研究*

为保证小型旋翼无人机近距编队悬停状态的安全性,采用数值模拟方法研究不同横向和纵向间隔双机悬停流场特征和气动参数变化规律,通过与实验结果对比,验证数值仿真方法的准确性。研究结果表明:无人机内部旋翼间的气动干扰会导致整机单旋翼拉力降低、扭矩增大,使整机气动效率下降;当双机无横向间隔时,双机下洗流场保持对称,同时2股下洗流叠加,呈现较明显的横向扩张趋势,此时后机所受气动影响主要为拉力损失,当纵向间隔大于5 D时,该影响基本消失;当横向间隔X=1 D时,位于尾流区一侧的旋翼拉力减小,后机所受俯仰力矩作用显著,无人机有侧翻风险;横向间隔X≥2 D时,2机之间气动干扰较弱,为较安全区域。     

纸基复合包装中铝塑分离的湿法工艺条件研究

纸基复合包装中的纸基部分通过水力碎浆分离后可直接用于生产再生纸. 其铝塑部分由1层0.02～0.03 mm厚的铝箔和2层0.03～0.08 mm厚的低密度聚乙烯膜层压复合而成,主要对铝塑的湿法分离进行研究.比较了甲酸、乙酸、盐酸3种剥离剂的分离效果; 用甲酸作为铝塑剥离剂时, 考察了剥离剂的浓度、反应温度、液固比及破碎尺寸对铝塑分离的影响; 根据铝塑分离时间、分离率、铝的损失率等指标,通过正交试验及方差分析优化铝塑分离的工艺条件. 结果表明,甲酸分离铝塑的最优条件: 剥离剂浓度为4 mol/L, 反应温度为60 ℃,液固比为60 L/kg, 破碎尺寸为5 cm×5 cm. 在该条件下, 铝塑的分离率达到100%.      

磁絮凝高效处理高浊度废水的性能及机理研究

自来水供水厂在运行过程会产生大量高浊度废水,其中富集了许多微生物、有机物及无机杂质,若直接排放会严重污染河流水体及周边土壤.采用磁絮凝工艺处理自来水厂供水过程中产生的高浊度废水,通过单因素和正交试验考察了聚合氯化铝(PAC)投加量、磁种(Fe3O4)投加量、废水初始pH值和沉降时间对废水中浊度、COD和UV254去除效...