Toluene decomposition performance and NOx by-product formation during a DBD-catalyst process

Characteristics of toluene decomposition and formation of nitrogen oxide (NOx) by-products were investigated in a dielectric barrier discharge (DBD) reactor with/without catalyst at room temperature and atmospheric pressure. Four kinds of metal oxides, i.e., manganese oxide (MnOx), iron oxide (FeOx), cobalt oxide (CoOx) and copper oxide (CuO), supported on Al₂O₃/nickel foam, were used as catalysts. It was found that introducing catalysts could improve toluene removal efficiency, promote decomposition of by-product ozone and enhance CO₂ selectivity. In addition, NOx was suppressed with the decrease of specific energy density (SED) and the increase of humidity, gas flow rate and toluene concentration, or catalyst introduction. Among the four kinds of catalysts, the CuO catalyst showed the best performance in NOx suppression. The MnOx catalyst exhibited the lowest concentration of O₃ and highest CO₂ selectivity but the highest concentration of NOx. A possible pathway for NOx production in DBD was discussed. The contributions of oxygen active species and hydroxyl radicals are dominant in NOx suppression.     

土壤及铁锰结核中锰氧化菌的氧化特性分析

利用从土壤铁锰结核及其附近土壤中分离筛选得到的4株锰氧化菌,研究了不同pH、Mn(Ⅱ)初始浓度下菌株的锰氧化效率及生长情况,并用SEM-EDS及TEM对菌株WHS26、GY16形成的生物氧化锰及水羟锰矿进行了表征.结果表明,pH及Mn(Ⅱ)初始浓度对菌株的锰氧化效率均有影响,4株菌在pH 7~8、Mn(Ⅱ)初始浓度为10~20 mmol·L-1时,锰氧化效率最高;GY16、WHS26形成的生物氧化锰的形貌与化学合成的水羟锰矿存在明显差异,前者呈胶膜状附着在菌株表面,后者呈结晶态.该结果可为生物氧化锰应用于重金属污染修复提供技术支撑.     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu^2 +, Cr^3 +, and V^3 + ions were prepared via a modified sol–gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250–400°C. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu^2 +- and Cr^3 +-containing catalysts showed 100% conversion at 300°C and 350°C, V^3 +-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.     

Diurnal and spatial variations of soil NOx fluxes in the northern steppe of China

NO_x emissions from biogenic sources in soils play a significant role in the gaseous loss of soil nitrogen and consequent changes in tropospheric chemistry. In order to investigate the characteristics of NO_x fluxes and factors influencing these fluxes in degraded sandy grasslands in northern China, diurnal and spatial variations of NO_x fluxes were measured in situ. A dynamic flux chamber method was used at eight sites with various vegetation coverages and soil types in the northern steppe of China in the summer season of 2010. Fluxes of NO_x from soils with plant covers were generally higher than those in the corresponding bare vegetation-free soils, indicating that the canopy plays an important role in the exchange of NO_x between soil and air. The fluxes of NO_x increased in the daytime, and decreased during the nighttime, with peak emissions occurring between 12:00 and 14:00. The results of multiple linear regression analysis indicated that the diurnal variation of NO_x fluxes was positively correlated with soil temperature (P < 0.05) and negatively with soil moisture content (P < 0.05). Based on measurement over a season, the overall variation in NO_x flux was lower than that of soil nitrogen contents, suggesting that the gaseous loss of N fromthe grasslands of northern China was not a significant contributor to the high C/N in the northern steppe of China. The concentration of NO_x emitted from soils in the region did not exceed the 1-hr National Ambient Air Quality Standard (0.25 mg/m³).     

钢铁工业氮氧化物污染防治途径研究

针对钢铁工业氮氧化物减排的紧迫形势,首先介绍了钢铁工业氮氧化物主要排放源,提出了烧结工序和自备电厂是氮氧化物排放的主要污染源,其烟气中氮氧化物控制是钢铁企业氮氧化物减排的重点;其次对钢铁工业氮氧化物生成机理,热力型、燃料型、快速型进行了分析;在此基础上,总结了钢铁工业烧结、自备电厂、焦化、炼铁、轧钢工序氮氧化物污染防治技术途径,为钢铁工业进一步开展氮氧化物减排工作提供了技术支撑.     

锰渣填埋场渗滤液及周边水体的水化学特征和质量评价

本文在分析锰渣填埋场区渗滤液及周边水体水化学组成的基础上,运用改进的水质量指数(WQI)进行了水质评价,阐述了填埋场渗滤液对下游水体的影响过程。结果表明,研究区渗滤液pH呈中性偏酸性,EC在1 780~44 500μS/cm之间,渗滤液中NH4-N、Mn2+、Mg2+、SO2-4、NO-3的浓度较高,并呈现SO2-4Mn2+Mg2+NH+4-N的特征,并且浓度与堆存时间呈负相关性。填埋场下游水体的重金属浓度微量,但NH4-N和Mn2+浓度较高,均超过GB 3838—2002和GB/T 14848—93规定的限值,其中2014年5月份某地下水的这两个参数分别超标243倍和488倍。改进的WQI指数评价结果显示,地表水的渗滤液水污染指数(LWPI)值在2.89~7.83之间,受影响的地下水为172,说明渗滤液已对锰渣填埋场下游水体造成严重影响。     

木兰县饮用水源地水质状况分析研究

2012年木兰县监测站对木兰县饮用水源地水质状况进行了监测,监测了六项常规的监测项目,其中包括:pH、总硬度、铁、锰、浑浊度、总大肠菌群.通过这些监测数据可知,木兰县饮用水源地中pH、总硬度、浑浊度均能达到中国《生活饮用水卫生标准》和国家《地下水质量标准》(GB 14848-93)规定,总大肠菌群四个季度均未检出,但铁的含量在第三季度出现超标情况,锰的含量在第一、二、三季度出现超标,本文分析了超标的成因及处理的方法,并提出建议.     

锰氧化物改性生物炭基质材料对典型喹诺酮类抗生素的吸附及其在人工湿地的应用

以废弃花生壳为原料,制备锰氧化物改性生物炭球（MBCB）用于去除水中的环丙沙星（CIP）和恩诺沙星（ENR）,探究MBCB对CIP和ENR的吸附特性及在人工湿地中的应用效果.结果表明,负载锰氧化物的MBCB对CIP和ENR的吸附过程分别符合准一级和准二级动力学模型,混合吸附过程符合准二级动力学模型,Langmuir和Freundlich等温模型都可以较好地拟合MBCB对CIP和ENR的吸附过程,在25℃条件下,通过Langmuir模型拟合出的对CIP和ENR的最大吸附量分别为3.84 mg·g^-1和2.01 mg·g^-1.MBCB对CIP和ENR的吸附过程主要受到内扩散和边界层扩散的控制,是自发的吸热过程,氢键和静电相互作用参与到吸附过程当中.添加MBCB作为基质的人工湿地对CIP和ENR的平均去除率达70.7%和62.9%,分别为对照组的1.625倍和1.719倍.同时,添加MBCB的湿地微生物丰度和多样性所受影响相对较小,这说明MBCB能缓解人工湿地中CIP和ENR的毒性,保证人工湿地对抗生素的去除效果.     

浅析珠三角地区有机废气治理技术的开发应用

珠江三角洲地区大气污染最明显的特点就是臭氧浓度的升高导致大气氧化性增强,而挥发性有机化合物(VOCs)和氮氧化物是大气臭氧生成的重要前体物。珠三角地区工业体系发达,VOCs的生产及使用企业众多,由于VOCs的种类繁多,性质各异,排放条件多样,目前已经形成了一系列的VOCs废气实用治理技术。     

脱硝工艺的技术比较

对包括SCR和SNCR在内的各种脱硝技术进行了比较,分析了各种脱硝方法的使用条件和特点,同时对未来脱硝技术的发展进行了预估,得出了优先选择SCR和SNCR,并发展各种脱硝技术的结论,为脱硝技术的选择与使用提供了技术参考。