颗粒物最大落地浓度及其出现距离的求算方法

本文利用迭代法计算出不同风速、不同稳定度下不同粒径颗粒物最大地面浓度及其出现位置，并对其与高扩散模式计算出的最大落地浓度及其出现位置的关系分别进行了探讨。     

微粒羽流中粉尘的实验研究

通过实验观察和实验结果分析,研究了自由下落羽流产生的粉尘与物料本身的物理参数和工作参数的变化关系,并对实际生产操作过程中如何减少粉尘的产生提供了参考建议。     

Occurrence and attenuation of specific organic compounds in the groundwater plume at a former gasworks site

The changing contaminant pattern with travelled distance was investigated in the anaerobic groundwater plume downstream from an extended zone containing residual NAPL at a former gas manufacturing plant. With increasing distance, O- and N-heterocyclic aromatic compounds are enriched in the plume relative to the usually assessed coal tar constituents (poly- and monocyclic aromatic compounds). In a first approximation, the overall concentration decrease of the investigated compounds follows a first order overall decay. The half life distance in the plume downgradient from the source varied between 20 m for benzene and up to 167-303 m for alkyl-naphthalenes. Acenaphthene is degraded only within about 50 m downstream from the source area, then its concentration remains constant (ca. 180 microg/l) and far above the legal limit. Dimethyl-benzofurans were the most recalcitrant among all compounds which could be quantified with the analytical method available. The overall groundwater contamination in the plume is seriously underestimated if only BTEX and 16-EPA-PAHs are monitored.     

The dispersion of the Buncefield oil fire plume: An extreme accident without air quality consequences

The dispersion of pollutants from the huge Buncefield oil depot fire that occurred on 11 December 2005 is simulated using a regional Eulerian chemistry-transport model. We analyse the transport and mixing of the fire plume. We show that the hot plume never reached the ground. Instead, it pierced the thin wintertime boundary layer and was injected into the free troposphere at higher altitudes. This is in agreement with data from many air quality stations. This high injection was fortunate because the fine aerosol particles (PM₁₀) mass column generated by the fire smoke exceeded that of ordinary pollution by an order of magnitude. Our regional chemistry-transport modelling is able to predict the early development of the plume dispersion, as shown by a qualitative comparison between simulated PM₁₀ columns and a satellite image obtained by the EOS-TERRA-MODIS sensor.If the accident had occurred in summer when boundary layers are much deeper and convective, a severe degradation in air quality due to PM₁₀ could have occurred, as shown by a sensitivity simulation assuming a similar fire during one of the hottest days of August 2003. The modelled impact of the fire on regional and European air quality levels strongly depends on the altitude reached by the buoyant plume, as shown by a set of sensitivity simulations with variable injection heights. However, in all cases we found that the fire only affected surface aerosol concentrations without increasing photochemical pollution.     

Integration of Flow and Chemical Sensing for Guidance of Autonomous Marine Robots in Turbulent Flows

We explored the utility of odor-gated rheotaxis (OGR) with a biomimetic robot. OGR is a widely accepted biological plume-tracing strategy that uses mean flow and chemical detection for guidance. In experiments which contrasted the `classic' single-sensor formulation of the strategy against one which used two sensors and against another which combined the use of two sensors and memory of past stimulation patterns we quantified the relative advantages of each. The use of two, spatially separated, chemical sensors confers a significant advantage and still greater performance is obtained with rudimentary memory. The performance of the American lobster under the same turbulent dispersal regime leads us to conclude that significantly more effective plume tracing strategies remain to be discovered.     

Filament-Based Atmospheric Dispersion Model to Achieve Short Time-Scale Structure of Odor Plumes

This article presents the theoretical motivation, implementation approach, and example validation results for a computationally efficient plume simulation model, designed to replicate both the short-term time signature and long-term exposure statistics of a chemical plume evolving in a turbulent flow. Within the resulting plume, the odor concentration is intermittent with rapidly changing spatial gradient. The model includes a wind field defined over the region of interest that is continuous, but which varies with location and time in both magnitude and direction. The plume shape takes a time varying sinuous form that is determined by the integrated effect of the wind field. Simulated and field data are compared. The motivation for the development of such a simulation model was the desire to evaluate various strategies for tracing odor plumes to their source, under identical conditions. The performance of such strategies depends in part on the instantaneous response of target receptors; therefore, the sequence of events is of considerable consequence and individual exemplar plume realizations are required. Due to the high number of required simulations, computational efficiency was critically important.     

地幔流体的稳定同位素地球化学综述

总结了 2 0年来国内外学者对地幔流体研究的成果和认识。主要包括地幔流体的性质和组成 ;地幔流体中同位素的含量、组成和赋存形式 ;同位素分馏和地幔脱气等作用对地幔组分的影响等。在不同地区和不同构造环境条件的地幔流体中 ,各种组分含量和同位素组成变化可以很大 ,从一个侧面指示地幔组分的不均一性 ,反映了不同地幔物质的形成历程不同或来自不同的地幔源区。此外 ,还讨论了目前存在的几个疑点     

Evaluation of a long-range lagrangian dispersion model with ETEX

Performance of a Lagrangian dispersion model was examined in connection with its dependency on the boundary layer modelling and the input data resolution. The European Tracer Experiment (ETEX) data were used as reference. According to the sensitivity analysis of the model performance, the long-range dispersion model with the sparse input data was not noticeably different from that with the finer resolution data. The assumption of the prescribed constant mixing depth did not largely degrade the prediction results as compared with the simulation results with the temporally changing boundary layer. It is, therefore, concluded that the model is practical, considering the limited input data in the operational mode. However, it was also pointed out that the parameterization for the horizontal and vertical diffusion processes used in the present model enhanced the growth of plume. The improvement of input data resolution in time and space caused further dispersion of tracer deterministically. These resulted in the underestimation of the maximum concentration and the unfocussed concentration distribution map although the mean concentration was predicted fairly well.     

Methane Emission Estimates from Landfills Obtained with Dynamic Plume Measurements

Methane emissions from 3 different landfills inthe Netherlands were estimated using a mobileTuneable Diode Laser system (TDL). The methaneconcentration in the cross section of the plumeis measured downwind of the source on a transectperpendicular to the wind direction. A gaussianplume model was used to simulate theconcentration levels at the transect. Theemission from the source is calculated from themeasured and modelled concentration levels.Calibration of the plume dispersion model isdone using a tracer (N₂O) that is releasedfrom the landfill and measured simultaneouslywith the TDL system. The emission estimates forthe different locations ranged from 3.6 to 16 m³ ha^-1 hr^-1 for the differentsites. The emission levels were compared toemission estimates based on the landfill gasproduction models. This comparison suggestsoxidation rates that are up to 50% in springand negligible in November. At one of the threesites measurements were performed in campaignsin 3 consecutive years. Comparison of theemission levels in the first and second yearshowed a reduction of the methane emission ofabout 50% due to implementation of a gasextraction system. From the second to the thirdyear emissions increased by a factor of 4 due tonew landfilling. Furthermore measurements wereperformed in winter when oxidation efficiencywas reduced. This paper describes themeasurement technique used, and discusses theresults of the experimental sessions that were performed.     

Integration of multi-channel piezometry and electrical tomography to better define chemical heterogeneity in a landfill leachate plume within a sand aquifer

The Hanai-Bruggeman effective medium theory is used to relate bulk electrical conductivity, measured by surface and cross-borehole images, to fluid electrical conductivity, surface conductance, porosity and the geometry factor, in a medium- to fine-grained sand deposit. The change in bulk EC is caused by the presence of a landfill leachate plume. Repeated electrical images over a period of 16 months indicate that various segments of the plume are moving. The chemical constituents of the leachate plume have been determined by sampling from a bundled piezometer located in the electrical image field. Very close agreement is demonstrated between the fluid EC anomaly and the presence of elevated bulk EC indicating that the electrical images can be used to map the plume geometry and to monitor the movement of the plume segments.