Biomass fuel burning and its implications: Deforestation and greenhouse gases emissions in Pakistan

Pakistan is facing problem of deforestation. Pakistan lost 14.7% of its forest habitat between 1990 and 2005 interval. This paper assesses the present forest wood consumption rate by 6000 brick kilns established in the country and its implications in terms of deforestation and emission of greenhouse gases. Information regarding consumption of forest wood by the brick kilns was collected during a manual survey of 180 brick kiln units conducted in eighteen provincial divisions of country. Considering annual emission contributions of three primary GHGs i.e., CO₂, CH₄ and N₂O, due to burning of forest wood in brick kiln units in Pakistan and using IPCC recommended GWP indices, the combined CO₂-equivalent has been estimated to be 533019 t y⁻¹.     

Appraisal of measurement methods, chemical composition and sources of fine atmospheric particles over six different areas of Northern Belgium

Daily and seasonal variation in the total elemental, organic carbon (OC) and elemental carbon (EC) content and mass of PM_2.5 were studied at industrial, urban, suburban and agricultural/rural areas. Continuous (optical Dustscan, standard tapered element oscillating micro-balance (TEOM), TEOM with filter dynamics measurement system), semi-continuous (Partisol filter-sampling) and non-continuous (Dekati-impactor sampling and gravimetry) methods of PM_2.5 mass monitoring were critically evaluated. The average elemental fraction accounted for 2-6% of the PM_2.5 mass measured by gravimetry. Metals, like K, Mn, Fe, Cu, Zn and Pb were strongly inter-correlated, also frequently with non-metallic elements (P, S, Cl and/or Br) and EC/OC. A high OC/EC ratio (2-9) was generally observed. The total carbon content of PM_2.5 ranged between 3 and 77% (averages: 12-32%), peaking near industrial/heavy trafficked sites. Principal component analysis identified heavy oil burning, ferrous/non-ferrous industry and vehicular emissions as the main sources of metal pollution.     

小型燃油锅炉NOx的排放特征与管理控制

以68台燃油锅炉（≤10～MW）NOx排放实测数据为基础,通过统计分析方法,研究了NOx的排放特征;通过对比分析,探讨了我国燃油锅炉NOx排放控制与管理现状,讨论了进一步加强我国燃油锅炉NOx排放管理控制的可能性与可行性,并提出了相应的管理控制建议。结果表明,NOx平均排放浓度为318．2mg／m^3,基于燃料消耗量的平均排放因子为4．4kg／t,基于燃料发热量的平均排放因子为102．8ng／J,基于燃料氮含量的平均排放因子为2．1mg／mg;建议采取分阶段控制的方式,逐步提高NOx排放限制,从而实现控源减排目标。     

Emissions of gaseous and particulate pollutants in a port and harbour region in India

Ports can generate large quantity of pollutants in the atmosphere due to various activities like loading and unloading,transportation, and construction operations. Determination of the character and quantity of emissions from individual sources is an essential step in any project to control and minimize the emissions.In this study a detailed emission inventory of total suspendedparticulate matter (TSP), particulate matter less than 10 m(PM₁₀), sulfur dioxide (SO₂) and nitrogen oxides (NO_x) for a port and harbour project near Mumbai is compiled. Results show that the total annual average contributions of TSP and PM₁₀ from all the port activitieswere 872 and 221 t yr^-1, respectively. Annual average emissions of gaseous pollutants SO₂ and NO_xwere 56 and 397 t yr^-1, respectively, calculatedby using emission factors for different port activities. The maximum TSP emission (419 t yr ^-1) was from paved roads, while the least (0.4 t yr^-1) was from bulk handling activity. The maximum PM₁₀ emission (123 t yr^-1) was from unpaved roads and minimum (0.2 t yr^-1) from bulk handling operations. Similarly the ratio of TSP and PM₁₀ emission was highest (5.18) from paved roads and least (2.17) from bulk handling operations. Regression relation was derivedfrom existing emission data of TSP and PM₁₀ from variousport activities. Good correlation was observed between TSP andPM₁₀ having regression coefficient >0.8.     

Chance-constrained programming (CCP)abatement of SO_2 emission for acid deposition control in Liuzhou City

A deterministic linear programming model which optimizes the abatement of each SO2 emission source, is extended into a CCP form by introducing equations of probabilistic constrained through the incorporation of uncertainty in the source-receptor-specific transfer coefficients. Based on the calculation of SO2 and sulfate average residence time for Liuzhou City, a sulfur deposition model has been developed and the distribution of transfer coefficients have been found to be approximately log-normal. Sulfur removal minimization of the model shows that the abatement of emission sources in the city is more effective, while control cost optimization provides the lowest cost programmes for source abatement at each allowable deposition limit under varied environmental risk levels. Finally a practicable programme is recommended.     

工业大气污染源排放绩效定量评价及应用

工业源治理是改善环境空气质量的重要途径,而如何开展精准治污仍然是目前亟需回答的问题.以天津市西青区为例,基于第二次全国污染源普查数据,对工业企业开展污染物排放绩效定量评价,并深入探究排放绩效评价应用于工业源精细化管控治理的意义、可行性以及存在的问题.结果 发现,西青区各行业的排放绩效水平差异较大.污染物排放绩效水平与行...     

火力发电行业主要气态污染物排放量计算方法研究

针对目前我国火力发电行业气态污染物排放量计算方法使用混乱的情况,根据欧盟《空气污染物排放清单指南》和美国《空气污染物排放因子汇编》,介绍了火电行业主要气态污染物排放量的实际测量及理论计算方法。提出我国火电行业应根据实际情况,选择实际测量、排放因子或经验公式等方法计算污染物排放量;使用排放因子方法计算SO2排放量时,应开展S元素转化率的研究;火电厂应增加燃料中N元素的分析,以利于NOx排放量的准确估算。     

厌氧-局部循环供氧生物膜技术处理农村污水

通过模拟农村生活污水水质和间歇进水特点,利用“厌氧-局部循环供氧生物膜”技术,研究该工艺对有机物、氮、磷的去除效果.厌氧池和局部循环供氧池有效容积比为1∶1.6,曝气装置位于局部循环供氧池中间底部,环形导流板将局部循环供氧池分隔成中间好氧区和四周缺氧区,斜管沉淀池前置到厌氧池与局部循环供氧池之间,出水端设置循环水池.装置连续稳定运行12个月,平均进水量为140 L/d,生物反应区HRT为1.3d.监测结果表明,出水COD、BOD、NH3-N、TN和TP平均浓度分别在40.31、3.38、2.69、11.98和0.75 mg/L,达到了国家城镇污水处理厂污染物排放指标(GB-18918-2002)中的一级排放标准.研究表明,厌氧-局部循环供氧技术是一种适合农村分散污水处理的新工艺,可有效减轻农业面源污染.     

Quantification of the interactions between Ca,Hg and extracellular polymeric substances (EPS) of sludge

The interactions between metals (Ca²⁺ and Hg²⁺) and extracellular polymeric substances (EPS) extracted from the aerobic and anaerobic sludge in wastewater treatment reactors were investigated using a combination of zeta potential measurement and 3-dimensional excitation–emission matrix (EEM) fluorescence spectroscopy with parallel factor (PARAFAC) analysis. Results show that Ca²⁺ had no substantial effects on the EEM fluorescence spectra of the EPS, but their zeta potentials increased with the increasing Ca²⁺ dosage. However, Hg²⁺ had a significant effect on the EEM fluorescence spectra of the EPS, while their zeta potentials seemed not to be affected by the dose of Hg²⁺. The interactions between Hg²⁺ and EPS were elucidated using the fluorescence quenching with PARAFAC analysis, while the interactions between Ca²⁺ and EPS were evaluated by the zeta potential technique. The binding constants for Hg²⁺ and EPS were two orders of magnitude higher than those for Ca²⁺ and EPS, suggesting that the binding mechanisms between Ca²⁺ and EPS were different from those between Hg²⁺ and EPS. The results might be useful for understanding the roles of EPS in bacterial self-protection against heavy metals and the aggregate formation mechanisms through ionic bridging interactions.     

New Metal Emission Patterns in Road Traffic Environments

The increased awareness of traffic as a major diffuse metal emission source emphasizes the need for more detailed information on the various traffic-related sources and how and where the metals are dispersed. In this study, metal emission patterns in the road traffic environment were examined from the perspective of different surrounding factors, e.g. the importance of intersections, deceleration, vehicle speed and traffic density. A total of 148 topsoil samples from 18 south Swedish roads were analysed (using GFAAS) for traffic-emitted metals, i.e. Cd, Cr, Cu, Ni, Pb, Sb and Zn. The roadside topsoil metal concentrations were used to examine correlations between metals and surrounding factors. The studied metals were divided into three groups corresponding to different emission sources: metals from decelerating activities (Cu, Sb and Zn), metals as historical residues from the combustion of petrol (Pb and Cd), and non-source-specific metals (Cr and Ni). It was found that Cu and Sb, despite their rather short history as traffic-emitted metals, have increased more than eightfold in roadside soils compared to background levels. The major source of road traffic related Cu and Sb is brake linings. The significant increase of Cu and Sb in roadside topsoil stresses the need for metal transport studies as well as effect studies of these metals. Metals emitted due to decelerating activities were not correlated to elevated concentrations near road junctions. Emission patterns of traffic-related metals alongside roads are crucial in order to be able to evaluate the optimal localization of storm water treatment ponds.