Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

青岛海洋环境碳纤维复合材料与低合金钢电偶腐蚀研究

目的 探究碳纤维复合材料在舰船应用时与金属材料的电偶腐蚀问题。方法 针对一种典型舰船用碳纤维增强乙烯基树脂复合材料,在青岛海洋大气环境下开展0.5、1、1.5、2 a期的自然曝晒试验,进而采用电化学分析手段考察其与低合金钢的电偶腐蚀效应,结合老化机制探究碳纤维复合材料的老化行为对其与钢电偶腐蚀的影响。结果及结论 在青岛大气环境曝晒不同周期的复合材料试样,开路电位与低合金钢相差较大,存在较高的电偶腐蚀倾向。随曝晒时间的延长,复合材料表面微裂纹不断产生、扩展,导致电化学反应活性点增多,两者电偶电流密度随之增大。在青岛海洋大气环境下暴露2 a后,碳纤维增强乙烯基树脂复合材料与低合金钢的电偶电流为0.356 9 μA/cm²,两者的电偶腐蚀敏感性达到B级。     

空空导弹海洋大气自然环境试验研究

针对空空导弹随航母服役需求和海洋大气自然环境适应性风险,结合相关标准和研制经验,对空空导弹海洋大气自然环境试验方案设计流程、方法及要点进行了研究。提出了一套空空导弹海洋大气自然环境试验方案,可用于指导新研型号科学有效地开展自然环境试验,为回答空空导弹海洋大气自然环境适应性指标提供了支撑。空空导弹应系统策划海洋大气自然环境试验,以尽早暴露问题,实现产品设计改进,为上舰环境适应性的提高奠定基础。同时,还应大力开展自然加速环境试验技术和动态自然环境试验技术研究工作。     

直升机腐蚀原因分析及全寿命周期防护技术

通过直升机实际使用过程中暴露的腐蚀问题,分析了直升机全寿命期的腐蚀防护应对方法和思路。对陆地环境和海洋环境使用直升机的腐蚀情况进行了汇总,并对直升机典型腐蚀问题及改进措施进行了研究。在此基础上,进一步分析了导致直升机发生腐蚀的环境、设计、生产、制造、维护等原因,总结了直升机易腐蚀部位、腐蚀特点以及危害性。提出了采用“设计保证、生产实现、维护保持”的综合手段来提升直升机全寿命期的腐蚀防护能力。最后,对外场维护维修过程中需要重点关注的腐蚀控制手册、清洗、涂镀层修复、密封剂/缓蚀剂等问题进行了思考和分析,提出了需加快推进先进的防腐技术在直升机防腐中的应用,对有效开展直升机全寿命周期的腐蚀防护工作具有一定指导意义。     

海洋环境服役发动机腐蚀损伤分析及防护能力提升建议

通过我国航空发动机海洋环境服役过程中腐蚀情况的调研,结合文献资料,分析腐蚀防护与控制技术的应用现状,提出未来工作建议。目前海洋环境服役航空发动机的腐蚀防护与控制缺少贯穿方案论证、设计研制、使用维修等全寿命周期各阶段的综合考虑,制约解决腐蚀问题的关键技术没有突破,研制生产过程中,存在耐腐蚀性能评估不合理的问题。应开展腐蚀智能监测、识别、模拟仿真等技术的研发与应用,实现海洋环境服役发动机的腐蚀损伤监控与预警,构建发动机腐蚀环境适应性试验评价技术体系,满足新体制下装备试验鉴定工作要求。急需开展长寿命防护涂层技术、维护技术专项研究,以适应严酷海洋大气环境和航空动力装置高可靠性研制要求。     

嘉陵江重庆磁器口段藻类生长模拟研究

藻类生长有一个适合的流速,即临界流速,在其他条件相同的情况下,处于临界流速状态的藻类生长更快.在藻类生长模型中,引人流速影响函数,数值模拟嘉陵江重庆城区磁器口河段2007年2月-7月的藻类生长情况,模拟结果与实测结果吻合较好.研究结果表明.流速在0.03-0.05 m/s比较适合研究河段的藻类生长.     

WJ-R01干膜耐磨自润滑涂料在某枪械上的应用

概述了干膜润滑涂层的原理。研制的WJ-R01干膜耐磨自润滑涂层具有耐磨减摩自润滑性能突出,耐腐蚀性能优异,能适应海洋大气环境等特点。介绍了其组成、理化性能,以及应用施工等情况。在兵器某枪械上应用效果良好。     

珠江广州河段着生藻类的群落结构及其与水质的关系

于2007年6月、7月和9月,采用玻璃挂片法对珠江广州河段9个断面处着生藻类的分布状况进行了调查,同时测定了叶绿素a、总氮、总磷、溶解氧、pH等环境因子.本调查共观察到着生藻类35种,主要以丝状绿藻占据优势,其中毛枝藻是绝对优势种,其最高数量百分比达97.4%;而附着在绿藻藻体的一些硅藻,如异极藻、脆杆藻也是常见优势物种.着生藻类数量丰富,为3.16×104-3.06×106cells·cm-2;种类多样性较低,Shannon-Weaver种类多样性指数为0.15～2.68.从总氮和总磷含量来看,珠江广州河段水质为Ⅲ类至Ⅴ类之间.调查期间,2007年7月12日举行了"广州市万人游珠江活动",由于活动期间采取的一些截污治理措施,6月、7月水质特别是广州市区河段水质有所好转;但活动过后,营养盐特别是总磷浓度迅速上升,叶绿素a含量和着生藻类数量急剧增加.研究结果说明,珠江广州河段水质能够得以改善,但需要采取持续而有效的措施防止水质的进一步恶化,才能保证珠江水资源的可持续发展.     

Quantifying the squeezing or stretching of fisheries as they adapt to displacement by marine reserves

The designation of no‐take marine reserves involves social and economic concerns due to the resulting displacement of fishing effort, when fishing rights are removed from those who traditionally fished within an area. Displacement can influence the functioning of the fishery and success of the reserve, yet levels of displacement are seldom quantified after reserve implementation and very rarely before that. We devised a simple analytical framework based on set theory to facilitate reserve placement. Implementation of the framework requires maps of fishing grounds, fishing effort, or catch per unit effort for at least 2 years. The framework quantifies the level of conflict that a reserve designation might cause in the fishing sector due to displacement and the opportunities to offset the conflict through fisher spatial mobility (i.e., ability of fishers to fish elsewhere). We also considered how the outputs of the framework can be used to identify targeted management interventions for each fishery. We applied the method in Honduras, where the largest marine protected area in Central America is being placed, for which spatial data on fishing effort were available for 6 fisheries over 3 years. The proposed closure had a greater negative impact on the shrimp and lobster scuba fisheries, which concentrated respectively 28% and 18% of their effort inside the reserve. These fisheries could not accommodate the displacement within existing fishing grounds. Both would be forced to stretch into new fishing grounds, which are available but are of unknown quality. These stakeholders will likely require compensation to offset costly exploratory fishing or to travel to fishing grounds farther away from port.     

Implications of Macroalgal Isolation by Distance for Networks of Marine Protected Areas

The global extent of macroalgal forests is declining, greatly affecting marine biodiversity at broad scales through the effects macroalgae have on ecosystem processes, habitat provision, and food web support. Networks of marine protected areas comprise one potential tool that may safeguard gene flow among macroalgal populations in the face of increasing population fragmentation caused by pollution, habitat modification, climate change, algal harvesting, trophic cascades, and other anthropogenic stressors. Optimal design of protected area networks requires knowledge of effective dispersal distances for a range of macroalgae. We conducted a global meta‐analysis based on data in the published literature to determine the generality of relation between genetic differentiation and geographic distance among macroalgal populations. We also examined whether spatial genetic variation differed significantly with respect to higher taxon, life history, and habitat characteristics. We found clear evidence of population isolation by distance across a multitude of macroalgal species. Genetic and geographic distance were positively correlated across 49 studies; a modal distance of 50–100 km maintained F_ST < 0.2. This relation was consistent for all algal divisions, life cycles, habitats, and molecular marker classes investigated. Incorporating knowledge of the spatial scales of gene flow into the design of marine protected area networks will help moderate anthropogenic increases in population isolation and inbreeding and contribute to the resilience of macroalgal forests. Implicaciones del Aislamiento por Distancia de Macroalgas para Redes de Áreas Marinas Protegidas