XZKP型高效空塔喷淋烟气脱硫装置技术特点

介绍了XZKP型高效空塔喷淋烟气脱硫装置的技术原理、技术特点、中试及工业化试验的情况。该技术通过改进工艺和结构,在提高脱硫效率和脱硫剂循环利用率两项技术上成效显著,用户可在不增加装置投资的前提下,获得更高的效率和更低的运行成本。     

NaCl和KCl对厌氧污泥抑制的动力学研究

在厌氧颗粒污泥和厌氧絮状污泥系统中,进行盐质量浓度(NaCl或KCl质量浓度,下同)对厌氧污泥抑制动力学的研究,得到不同拟合的COD降解动力学方程及参数.实验结果表明:当盐质量浓度为10～30 g/L时,KCl对厌氧污泥的COD比降解速率的抑制程度大于NaCl;当盐质量浓度由0 g/L增至10 g/L时,半速率常数逐渐增加;当盐质量浓度由10 g/L增至30 g/L时,半速率常数逐渐减小;在厌氧污泥系统中,NaCl抑制作用下的盐抑制常数高于KCl,且颗粒污泥的盐抑制常数高于絮状污泥.     

基于微观仿真的同站台换乘站客流疏散研究

旨在对同站台换乘站的客流行为和规律,以及对车站乘客疏散时的情况进行分析和研究。通过建立同站台换乘站的微观疏散仿真模型,利用微观仿真软件VISSIM对某即将建成使用的同站台换乘站的仿真模拟,直观地对客流的疏散过程和疏散人群分布状况进行动态观察,通过改变模型的参数设置,考察不同情况下换乘站的换乘效率,得出提高换乘效率的措施和建议,并最终为换乘站的设施设计和运营管理提供辅助设计与决策支持。     

细水雾中雾滴和高温环境的热质交换研究

由雾滴的表面的组分方程和能量方程入手,探讨雾滴在静止的高温环境中的热质交换及生存时间。应用折算薄膜理论,通过特征时间的比较,提出雾滴与高温环境主要通过沸腾机制实现热质交换;考虑滴径与速度变化的耦合作用,应用数值方法研究雾滴在强迫对流环境中与高温环境的热质交换情况。结果表明:对于滴径较小的雾滴不可能达到火焰区或可燃物表面实施火焰冷却和表面冷却,其灭火作用主要依赖于汽化吸热。     

Thoughts concerning the economic valuation of landscapes

The incorporation of economic thinking into the valuation of landscapes is still relatively new. It is an approach that yields valuable new insights and can help with prioritizing the use of scarce resources to improve and/or preserve landscapes. This paper explores and discusses the uses and limitations of economic valuation of landscapes from market failure, policy process, and theoretical and philosophical perspectives.     

中国城市建设用地集聚对利用效率的影响:机理、空间效应与分群差异

为探究城市建设用地集聚对城市建设用地利用效率的作用机理,文章基于2003—2017年中国278个地级及以上城市面板数据,通过构建多产出随机前沿生产函数模型测度城市建设用地利用效率,采用时间-空间双固定的空间杜宾模型探讨了不同程度的城市建设用地集聚对利用效率的影响机理与差异。结果表明:(1)从时空特征上来看,样本考察期内中国城市建设用地利用效率总体上呈稳步提升趋势,东部城市建设用地效率最高,西部次之,中部最低。(2)从全国维度的空间计量模型回归结果来看,城市建设用地集聚所带来的规模效应和外溢效应对城市建设用地利用效率具有改进作用,有利于利用效率进一步提升。(3)从不同城市建设用地集聚度分群回归结果来看,高集聚城市(东部发达地区)的直接效应显示随着城市建设用地集聚度的提高,利用效率也不断提高;间接效应中,建设用地集聚度的提高对周边城市的利用效率产生先带动后抑制的"倒U"形作用。低集聚城市(中西部欠发达地区)的直接效应和间接效应均显示,随着城市建设用地集聚的提高,其利用效率存在"先降后升"的"U"形曲线特征。可见,在城市发展的不同阶段,城市建设用地集聚对城市土地利用效率存在差异化影响。因此,中国城市发展应立足当前发展阶段特征,制定差别化的供地政策,促进城市建设用地集聚,针对性地提升区域要素利用效率,支撑经济社会进一步发展。     

The accounting method and application of CO2 emissions responsibility by the electricity sector at the provincial level in China

When accounting the CO₂ emissions responsibility of the electricity sector at the provincial level in China,it is of great significance to consider the scope of both producers’ and the consumers’ responsibility,since this will promote fairness in defining emission responsibility and enhance cooperation in emission reduction among provinces.This paper proposes a new method for calculating carbon emissions from the power sector at the provincial level based on the shared responsibility principle and taking into account interregional power exchange.This method can not only be used to account the emission responsibility shared by both the electricity production side and the consumption side,but it is also applicable for calculating the corresponding emission responsibility undertaken by those provinces with net electricity outflow and inflow.This method has been used to account for the carbon emissions responsibilities of the power sector at the provincial level in China since 2011.The empirical results indicate that compared with the production-based accounting method,the carbon emissions of major power-generation provinces in China calculated by the shared responsibility accounting method are reduced by at least 10%,but those of other power-consumption provinces are increased by 20% or more.Secondly,based on the principle of shared responsibility accounting,Inner Mongolia has the highest carbon emissions from the power sector while Hainan has the lowest.Thirdly,four provinces,including Inner Mongolia,Shanxi,Hubei and Anhui,have the highest carbon emissions from net electricity outflow- 14 million t in 2011,accounting for 74.42% of total carbon emissions from net electricity outflow in China.Six provinces,including Hebei,Beijing,Guangdong,Liaoning,Shandong,and Jiangsu,have the highest carbon emissions from net electricity inflow- 11 million t in 2011,accounting for 71.44% of total carbon emissions from net electricity inflow in China.Lastly,this paper has estimated the emission factors of electricity consumption at the provincial level,which can avoid repeated calculations when accounting the emission responsibility of power consumption terminals（e.g.construction,automobile manufacturing and other industries）.In addition,these emission factors can also be used to account the emission responsibilities of provincial power grids.     

Microbial fuel cells: Advances in electrode modifications for improvement of system performance

There is an increasing trend to conduct the researches related to Microbial Fuel Cells (MFCs) in the recent years. Limited power output has been the major obstacle for the practical application and upscaling of MFCs. Attempts have been made on electrode modifications such as anode treatments, cathode modifications with catalysts and bio cathodes developments to produce varying degrees of improved output current depending upon the types of modifications. Power density and Coulombic efficiency have been considered as the important parameters to analyze the system performances. This paper overviews on the advances made in MFCs’ researches focusing on different types of electrodes modifications along with the involved methodology. Furthermore, the system performances of different modified MFCs are compared in terms of the power density and the Coulombic efficiency.     

Corynebacterium glutamicum as an indicator for environmental cobalt and silver stress–A proteome analysis

Cobalt and silver are toxic for cells, but mechanisms of this toxicity are largely unknown. Analysis of Corynebacterium glutamicum proteome from cells grown in control and cobalt or silver enriched media was performed by two dimensional gel electrophoresis (2DE) followed by mass spectrometry. Our results indicate that the cell adapted to cobalt stress by inducing five defense mechanisms: Scavenging of free radicals, promotion of the generation of energy, reparation of DNA, reparation and biogenesis of Fe-S cluster proteins and supporting and reparation of cell wall. In response to the detoxification of Ag⁺ many proteins were up-regulated, which involved reparation of damaged DNA, minimizing the toxic effect of reactive oxygen species (ROS) and energy generation. Overexpression of proteins involved in cell wall biosynthesis (1,4-alpha-glucan branching enzyme and nucleoside-diphosphate-sugar epimerase) upon cobalt stress and induction of proteins involved in energy metabolism (2-methylcitrate dehydratase and 1, 2-methylcitrate synthase) upon silver demonstrate the potential of these enzymes as biomarkers of sub-lethal Ag⁺ and Co toxicity.     

The structure of the fire fighting foam surfactant Forafac®1157 and its biological and photolytic transformation products

For several decades, perfluorooctane sulfonate (PFOS) has widely been used as a fluorinated surfactant in aqueous film forming foams used as hydrocarbon fuel fire extinguishers. Due to concerns regarding its environmental persistence and toxicological effects, PFOS has recently been replaced by novel fluorinated surfactants such as Forafac®1157, developed by the DuPont company. The major component of Forafac®1157 is a 6:2 fluorotelomer sulfonamide alkylbetaine (6:2 FTAB), and a link between the trade name and the exact chemical structure is presented here to the scientific community for the first time. In the present work, the structure of the 6:2 FTAB was elucidated by ¹H, ¹³C and ¹⁹F nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Moreover, its major metabolites from blue mussel (Mytilus edulis) and turbot (Scophthalmus maximus) and its photolytic transformation products were identified. Contrary to what has earlier been observed for PFOS, the 6:2 FTAB was extensively metabolized by blue mussel and turbot exposed to Forafac®1157. The major metabolite was a deacetylated betaine species, from which mono- and di-demethylated metabolites also were formed. Another abundant metabolite was the 6:2 fluorotelomer sulfonamide. In another experiment, Forafac®1157 was subjected to UV-light induced photolysis. The experimental conditions aimed to simulate Arctic conditions and the deacetylated species was again the primary transformation product of 6:2 FTAB. A 6:2 fluorotelomer sulfonamide was also formed along with a non-identified transformation product. The environmental presence of most of the metabolites and transformation products was qualitatively demonstrated by analysis of soil samples taken in close proximity to an airport fire training facility.