Testes mass in megachiropteran bats varies in accordance with sperm competition theory

Sperm competition is a widespread phenomenon influencing a range of characters, including investment in gonadal tissue. Conspecific proximity is one factor which can influence the risk of sperm competition and hence testicular investment, and decreased confidence of paternity may be one cost of group living. Aspects of female biology may also influence spermatogenic investment and sperm morphology. This study examines the associations between relative testes mass and roost-group size across 17 species of Megachiroptera. Associations between breeding season duration and investment in spermatogenesis are also examined, as are associations between female reproductive tract dimensions and testes mass and dimensions of spermatozoa across all bats. Relative testes mass was significantly positively associated with roost-group size at a species level and after appropriate phylogenetic control (pairwise comparisons and comparison of independent contrasts). There were no significant relationships between breeding season duration and relative testes mass. Across all bats, neither testes mass nor sperm length were significantly related to dimensions of the female tract. The results are discussed in the context of sperm competition. Received: 7 January 1998 / Accepted after revision: 8 August 1998     

确定岩体斜坡滑动面抗剪强度的动态反分析方法

滑动结构面的抗剪强度在岩体滑坡的稳定性计算中是最重要的参数,也是最难以确定的。基于岩体抗剪强度是多种因素影响下的随机变量这一认识前提下,本文以西柏坡“中共中央解放军总部”旧址滑坡为例提出了确定岩体斜坡滑动面抗剪强度的动态反分析方法,并对该方法获得的抗剪强度的实用性进行了分析。结果表明,反分析方法是获得岩体斜坡滑动面抗剪强度的最经济、合理的途径。     

液化四氟乙烷小孔泄漏试验研究

采用高速摄影技术,考察了液化四氟乙烷发生小孔泄漏时,其水平泄漏和垂直泄漏的初始云团演化行为、泄漏的质量流率、喷射速度和喷射角,并与理论计算公式进行了对比。结果表明:水平喷射两相云团尾部出现涡流,涡流大幅加快了云团向空气中扩散的速率;垂直喷射的两相云团在地面形成液池,液池大幅增加了液化气体向空气中蒸发的速率。水平泄漏试验的喷射角与容器内超压变化规律相似,泄放初期喷射角逐渐增大,经历一段平坦期,到泄放末期喷射角减小。水平泄漏和垂直泄漏的初始喷射速度分别为25 m/s和20 m/s,与理论值26.6 m/s基本吻合。水平泄漏的质量流率的试验值和理论值分别为0.0598 kg/s和0.0684 kg/s,垂直泄漏的分别为0.0472 kg/s和0.059 6 kg/s,结果对比基本吻合,推荐的泄漏质量流率和小孔喷射速度公式可以用于液化四氟乙烷小孔泄漏。     

消费电子产品生产过程中挥发性有机物(VOCs)排放特征的研究

选取塑胶零件、印刷线路板及主板3类消费电子产品部件为研究对象,利用活性炭管采样,样品溶剂解吸后采用GC/MS分析,获得了各排气筒及车间内VOCs含量水平与组分特征.通过计算排放量,得出了分物种VOCs排放系数.结果表明,塑胶零件生产线排气筒总挥发性有机物(TVOCs)浓度为48.01~115.05 mg·m-3,印刷线路板为6.08~11.36 mg·m-3,主板为29.81~30.21 mg·m-3.塑胶零件生产车间内TVOCs浓度为4.23~120.58 mg·m-3,印刷线路板为1.50~2.02 mg·m-3,主板为7.01~9.93 mg·m-3.环烷烃类、酯类、苯类为主要排放物质.对于不同产品生产线的排气筒及车间废气,浓度和物种均有很大差异;对于相同产品,浓度有差异但物种基本相同.按产品分类,共计算得出了36个分物种VOCs排放系数,其中,塑胶零件、印刷线路板及主板TVOCs排放系数分别为0.626 kg·kg-1涂料用量、0.123 kg·kg-1油墨用量、0.028 kg·kg-1印刷线路板用量.通过排放量计算结果分析,3种产品中,塑胶零件生产为VOCs主要排放源,车间内无组织排放为主要排放方式.     

Pollution levels and characteristics of phthalate esters in indoor air in hospitals

The concentrations of phthalate esters(PAEs) in Chinese hospitals were investigated by simultaneously determining concentrations of gas- and particle-phase PAEs. PAEs were detected in two third-class first-grade hospitals, two second-class first-grade hospitals, and a community health service center. Hospital drugstores had the highest concentration(24.19 μg/m3), which was 1.54 times that of newly decorated houses. The second highest concentration was found in the transfusion rooms, averaging 21.89 μg/m3; this was followed by the concentrations of PAEs in the nurse's workstations, the wards, and the doctor's offices, with mean concentrations of 20.66, 20.0, and 16.92 μg/m3, respectively. The lowest concentrations were found in the hallways(16.30 μg/m3). Of the six different kinds of PAEs found, major pollutants included diethyl phthalates, dibutyl phthalates, butylbenzyl phthalates and di(2-ethylhexyl) phthalates, comprising more than 80% of all PAEs present.Meanwhile, a comparison between different wards showed that PAE concentrations in the maternity wards were 1.63 times higher than in the main wards. Based on known health hazards, our results suggest that the PAEs seriously influence the health of the pregnant women and babies; therefore, it is of great importance to take the phthalate concentrations in hospitals into consideration. In addition, hospital indoor air was more seriously contaminated than the air of newly decorated houses.     

臭氧+曝气生物滤池深度处理工艺试验研究

针对某污水厂出水不达标的情况,本研究采用臭氧(O3)和曝气生物滤池(BAF)组合工艺对其进行深度处理.结果表明,当采用两级臭氧+曝气生物滤池工艺时,出水COD在31～46 mg/L,色度在13～29倍,均达到一级A排放标准.在最佳运行条件下,臭氧氧化使相对分子质量大于50 000的有机物含量减少10％,小于1 000的有机物含量增加14％.曝气生物滤池工艺使相对分子质量小于1 000的有机物含量降低了24％.     

城市土地利用类型与PM2.5浓度相关性研究——以武汉市为例

随着我国工业化的不断发展,在我国的主要经济发展地区的雾霾天气不断爆发,使我国的大气环境日益恶化,严重影响了人们的日常生活和身体健康。PM2.5作为雾霾的重要组成成分,也日渐成为环境领域的研究热点问题。随着全球性变化研究领域逐渐加强了对土地利用与生态环境的相关研究,因此无论从法律和社会经济发展的角度,还是从生态资源保护与环境可持续发展的角度,土地利用与PM2.5的相关研究都显得相当重要。研究目的:分析武汉市各类用地类型与PM2.5浓度的相关性程度。研究方法:使用ENVI与ArcGIS对武汉市2013年MODIS气溶胶产品进行空间分析与插值处理,再应用SPSS将其与武汉市2013年10个观测点的PM2.5浓度数据作相关性分析,以证实MODIS气溶胶厚度与PM2.5浓度的相关性,并建立两者的线性回归方程,然后利用计算后的武汉市整体PM2.5浓度分布与各土地利用类型进行相关性研究。研究结果:武汉市PM2.5浓度有明显的空间分布特征,绿化面积比例与PM2.5浓度呈显著负相关,建设用地面积比例与PM2.5浓度呈显著正相关,未利用地面积比例虽然与PM2.5浓度呈正相关,但相关性较低,而耕地与水体对PM2.5浓度没有显著影响。研究结论:土地利用类型对武汉市PM2.5浓度的分布有显著的影响,其与搭载MODIS传感器的遥感卫星监测方式的结合能成为研究大范围特定区域PM2.5浓度空间格局的新方法,并且增加城市绿化面积,控制建设用地规模能有效减少PM2.5浓度。     

基于放射性碳分析的多环芳烃源解析:技术进展和准确性评估

化石燃料燃烧和生物质燃烧是污染物多环芳烃(polycyclic aromatic hydrocarbon,PAHs)的两大来源.放射性碳(14C)分析近年用于评估这两类源对环境中PAHs的相对贡献.此方法基于化石燃料和生物质的14C含量差异,即化石燃料不含14C,而生物质的14C浓度有一个较稳定值.14C的自然丰度极低(约10-12),因此检测PAHs这样的痕量污染物的14C含量一度极具挑战.1990年代中期,加速器质谱的技术突破使得对环境样品PAHs的14C分析具有实用价值.要准确测出PAHs的14C含量,须先从化学成分复杂的环境样品中分离出高纯度的PAHs.制备气相色谱因其出色的分离能力而成为目前环境样品PAHs14C分析必备的工具.本文意在简介基于14C分析的PAHs源解析的基本原理、技术进展,以及评估该方法获得的PAHs源解析结果的准确性.