Enhanced degradation of bioremediation residues in petroleum-contaminated soil using a two-liquid-phase bioslurry reactor

A study was performed to determine the potential of two-liquid-phase (TLP) bioslurry reactors using silicon oil as solvent for degradation of residual contaminants in petroleum-contaminated soil. The residues were characterized by gas chromatography–mass spectrometry and electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry. This allowed for the identification of a mixture of residual biomarkers, metabolic byproducts, oxygenated and hetero-polynuclear aromatic hydrocarbons in the contaminated soil. The removal amount of total extractable organics (TEO) was 15 900 mg kg⁻¹ soil in the TLP reactor within 12 weeks. However, TEO remained intact in the bioslurry reactor without the addition of silicon oil for the duration of the experiment, due to high toxicity of metabolites to the microorganisms. The availability of TEO was calculated using a mild extraction with Triton X-100, and the amount of TEO extracted was in accord with the amount of biodegraded TEO. Significantly reduced toxicity in soil was observed at week 12 through TLP remediation. Dehydrogenase activity in the bioslurry reactor was strongly suppressed. Fluorescein diacetate was significantly hydrolyzed by the composition of bioremediation residues in the contaminated soil. Microbial adhesion to the solvent was revealed by the determination of microbial activity in the water-immiscible-liquid.     

Factors affecting nitrate distribution in shallow groundwater under a beef farm in South Eastern Ireland

Groundwater contamination was characterised using a methodology which combines shallow groundwater geochemistry data from 17 piezometers over a 2 yr period in a statistical framework and hydrogeological techniques. Nitrate–N (NO₃-N) contaminant mass flux was calculated across three control planes (rows of piezometers) in six isolated plots. Results showed natural attenuation occurs on site although the method does not directly differentiate between dilution and denitrification. It was further investigated whether NO₃-N concentration in shallow groundwater (<5 m below ground level) generated from an agricultural point source on a 4.2 ha site on a beef farm in SE Ireland could be predicted from saturated hydraulic conductivity (K_sat) measurements, ground elevation (m Above Ordnance Datum), elevation of groundwater sampling (screen opening interval) (m AOD) and distance from a dirty water point pollution source. Tobit regression, using a background concentration threshold of 2.6 mg NO₃-N L⁻¹ showed, when assessed individually in a step wise procedure, K_sat was significantly related to groundwater NO₃-N concentration. Distance of the point dirty water pollution source becomes significant when included with K_sat in the model. The model relationships show areas with higher K_sat values have less time for denitrification to occur, whereas lower K_sat values allow denitrification to occur. Areas with higher permeability transport greater NO₃-N fluxes to ground and surface waters. When the distribution of Cl⁻ was examined by the model, K_sat and ground elevation had the most explanatory power but K_sat was not significant pointing to dilution having an effect. Areas with low NO₃ concentration and unaffected Cl⁻ concentration points to denitrification, low NO₃ concentration and low Cl⁻ chloride concentration points to dilution and combining these findings allows areas of denitrification and dilution to be inferred. The effect of denitrification is further supported as mean groundwater NO₃-N was significantly (P < 0.05) related to groundwater N₂/Ar ratio, redox potential (Eh), dissolved O₂ and N₂ and was close to being significant with N₂O (P = 0.08). Calculating contaminant mass flux across more than one control plane is a useful tool to monitor natural attenuation. This tool allows the identification of hot spot areas where intervention other than natural attenuation may be needed to protect receptors.     

Validation of reliable and selective methods for direct determination of glyphosate and aminomethylphosphonic acid in milk and urine using LC-MS/MS

Simple high-throughput procedures were developed for the direct analysis of glyphosate [N-(phosphonomethyl)glycine] and aminomethylphosphonic acid (AMPA) in human and bovine milk and human urine matrices. Samples were extracted with an acidified aqueous solution on a high-speed shaker. Stable isotope labeled internal standards were added with the extraction solvent to ensure accurate tracking and quantitation. An additional cleanup procedure using partitioning with methylene chloride was required for milk matrices to minimize the presence of matrix components that can impact the longevity of the analytical column. Both analytes were analyzed directly, without derivatization, by liquid chromatography tandem mass spectrometry using two separate precursor-to-product transitions that ensure and confirm the accuracy of the measured results. Method performance was evaluated during validation through a series of assessments that included linearity, accuracy, precision, selectivity, ionization effects and carryover. Limits of quantitation (LOQ) were determined to be 0.1 and 10 µg/L (ppb) for urine and milk, respectively, for both glyphosate and AMPA. Mean recoveries for all matrices were within 89–107% at three separate fortification levels including the LOQ. Precision for replicates was ≤7.4% relative standard deviation (RSD) for milk and ≤11.4% RSD for urine across all fortification levels. All human and bovine milk samples used for selectivity and ionization effects assessments were free of any detectable levels of glyphosate and AMPA. Some of the human urine samples contained trace levels of glyphosate and AMPA, which were background subtracted for accuracy assessments. Ionization effects testing showed no significant biases from the matrix. A successful independent external validation was conducted using the more complicated milk matrices to demonstrate method transferability.     

A flow-through passive dosing system for continuously supplying aqueous solutions of hydrophobic chemicals to bioconcentration and aquatic toxicity tests

A continuous supply of water with defined stable concentrations of hydrophobic chemicals is a requirement in a range of laboratory tests such as the OECD 305 protocol for determining the bioconcentration factor in fish. Satisfying this requirement continues to be a challenge, particularly for hydrophobic chemicals. Here we present a novel solution based on equilibrium passive dosing. It employs a commercially available unit consisting of ∼16 000 polydimethylsiloxane (PDMS) tubes connected to two manifolds. The chemicals are loaded into the unit by repeatedly perfusing it with a methanol solution of the substances that is progressively diluted with water. Thereafter the unit is perfused with water and the chemicals partition from the unit into the water. The system was tested with nine chemicals with log K_OW ranging from 4.1 to 6.3. The aqueous concentrations generated were shown to be largely independent of the water flow rate, and the unit to unit reproducibility was within a factor of ∼2. In continuous flow experiments the aqueous concentrations of most of the study chemicals remained constant over 8 d. A model was assembled that allows prediction of the operating characteristics of the system from the log K_OW or PDMS/water partition coefficient of the chemical. The system is a simple, safe, predictable and flexible tool that generates stable aqueous concentrations of hydrophobic chemicals.     

In vivo and in vitro metabolism of tobacco-specific nitrosamine, 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK), by the freshwater planarian, Dugesia japonica

Cigarette smoke is a risk factor for human health, and many studies were conducted to investigate its adverse effects on humans and other mammals. However, since large amounts of cigarette products are produced and consumed, it is possible that tobacco chemicals can end up in aquatic environments through several routes, thus influencing aquatic organisms. In this study, the presence of tobacco-specific nitrosamine (TSNA), 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK), in aquatic environment was demonstrated. Since toxic effects on and distribution patterns of tobacco chemicals in aquatic organisms were rarely studied, after results of an acute toxicity pretest were obtained, experiment was conducted to investigate the bioaccumulation pattern of NNK and distribution patterns of its metabolites, mainly 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL), in NNK-treated freshwater planarians, Dugesia japonica. Results from in vivo and in vitro studies showed that NNK was readily converted to NNAL through the carbonyl reduction in bodies of NNK-treated planarians. Tissue concentrations of both chemicals increased in time- and dose-dependent manners. Furthermore, we examined the end products of NNK/NNAL α-hydroxylation in NNK-treated planarians, but only 1-(3-pyridyl)-1,4-butanediol was detected, suggesting that NNK metabolism in planarians partially differs from that in mammalian systems. This is the first report on NNK metabolism in an aquatic organism and can be used as a foundation for developing freshwater planarians as a new in vivo model for the study of NNK toxicology in the future.     

Serum concentrations of persistent organic pollutants (POPs) in the inhabitants of a Sicilian city

Background

Polychlorinated biphenyls (PCBs) and organochlorine pesticides are common environmental contaminants that have been associated with human health problems.

Objectives

To assess serum concentrations of several organochlorine contaminants in general population living in a city with an ancient agricultural tradition and to identify possible exposure sources in Sicily.

Methods

A cross-sectional study was conducted on 101 individuals. Each participant answered a face-to-face questionnaire submitted by well-trained personnel and provided a serum sample which was analyzed for the concentrations of PCBs, HCB, HCHs and DDTs by using gas-chromatography coupled with mass spectrometry.

Results

HCB, p,p′-DDE, PCB 138, PCB 153 and PCB 180 were detected in more than 80% of the study participants. The ng g⁻¹ lipid median concentrations were: 18.6 for HCB; 175.1 for p,p′-DDE; 22. for PCB 138; 32.5 for PCB 153 and 23.0 for PCB 180. PCB 153 and PCB 138, PCB 138 and PCB 180, PCB 153 and PCB 180, and p,p′-DDE and HCB showed a high correlation each other (p < 0.05). HCB and p,p′-DDE concentrations were significantly higher in subjects >49 years old (adj-p = 0.03 in 50-69 years old and adj-p < 0.001 in >69 years old, respectively) whereas PCB 138, PCB 153 and PCB 180 concentrations were higher in males (adj-p = 0.03), in subjects >69 years old (adj-p = 0.04) and in current smokers (adj-p = 0.04).

Conclusions

The present study shows that serum concentrations of organochlorine compounds detected in subjects living in a small Sicilian city with ancient agricultural tradition are similar to those found in subjects living in urban areas of other countries. However, further investigations are needed to compare data from rural/urban areas in the same country, assessing correlations between serum concentrations of several chemical compounds and potential health effects in general population.     

Soil-plant-animal transfer models to improve soil protection guidelines: a case study from Portugal

Food chain models are essential tools to assess risks of soil contamination in view of product quality including fodder crops and animal products. Here we link soil to plant transfer (SPT) models for potentially toxic elements (PTEs) including As, Ba, Cd, Co, Cu, Hg, Ni, Pb, Sb, U and Zn with models describing accumulation in animal organs. Current EU standards for food products and acceptable daily intake levels (ADI) for humans were used as critical limits. The combined model is used to assess the impact of soil contamination on animal health, product quality and human health using data from 100 arable fields. Results indicate that 42 existing arable fields near industrial and mining sites are unsuitable for animal grazing in view of food safety due to elevated intake of Cd, Cu, Hg and Pb by cows and sheep. At 10 sites daily intake levels of As by cows exceeded threshold concentrations regarding the quality of animal products.The food chain model also was used inversely to derive soil threshold concentrations in view of EU fodder standards. Calculated threshold levels in soil for As, Cd, Cu, Pb, Hg and Zn appear to be in line with those proposed or used in other EU countries. As such the approach applied here can form a conceptual basis for a more harmonized risk assessment strategy regarding the protection of animal and human health.     

Polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCD) in seven different marine bird species from Iceland

Data on distribution, concentration and trends of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDs) is scarce in biota from the sub-Arctic region of the Atlantic. The present study is an investigation on PBDE and HBCD concentrations in eggs from seven marine bird species from Iceland, i.e. common eider (Somateria mollissima), arctic tern (Sterna paradisaea), guillemot (Uria aalge), fulmar (Fulmarus glacialis), lesser black-backed gull (Larus fuscus), great black-backed gull (Larus marinus) and great skua (Stercorarius skua). Concentrations of sum PBDEs ranged from 44 ng g⁻¹ fat in eider eggs to 2400 ng g⁻¹ fat in great skua eggs. The contribution of different PBDE congeners to the sum concentration differed between species. Concentration of HBCDs (sum of α−,β⁻ and γ−HBCD) ranged from 1.3 ng g⁻¹ fat in arctic tern eggs to 41 ng g⁻¹ fat in great black-backed gull. PCA on PBDE and HBCD shows different trends between the two BFR groups, further indicating different sources/usage. Investigations on any potential health or population effects of environmental pollutants on the great skua are advised since both the PBDE and HBCD concentrations are high.     

Application of indoxacarb for managing shoot and fruit borer of eggplant (Solanum melongena L.) and its decontamination

Indoxacarb was applied at 75 and 150 g a.i. ha^{? 1} for two years to an eggplant (Solanum melongena L.) crop grown in the field plots in order to evaluate its efficacy for management of the lepidopteron pest, shoot and fruit borer. The residues of the insecticide were quantified by high-pressure liquid chromatography (HPLC). The mean initial deposits of indoxacarb on eggplant fruits were found to be 2.60–2.634 mg kg^{? 1} and 3.64–3.68 mg kg^{? 1} from the two rates of applications, respectively. They declined with time and reached to non-detectable (< 0.02 mg kg^{? 1}) after 15–20 d. Residues dissipated with a half-life of 3.0–3.8 d from both first and second-year application. A 3 d waiting period for harvest of fruits after insecticide application and processing resulted in the residue levels that were below the Codex maximum residue limit (MRL) of 0.5 mg kg^{? 1} thereby achieving a maximum safety and minimum risk to consumers. The best combination of chemicals for decontamination of indoxacarb was found to be by washing with a mixture of alkali and potassium permanganate (KMnO₄) thereby resulting in the removal of 67.5% and 59.2 % residues for 5 and 10 μ g g^{? 1} spiking doses, respectively. Major products formed on reaction of indoxacarb with alkali were identified by electron spray ionization chromatography/mass spectrometry (ESI/MS). The per cent reduction on the weight and number basis of treated eggplant plots were compared to those observed in control plots to demonstrate the effectiveness of indoxacarb treatment on shoot and fruit borer population.     

Rain‐washing of mimic®, RH‐5992, from balsam fir foliage following application of two formulations

Abstract

Two formulation concentrates of the insecticide, RH‐5992 [N'‐t‐butyl‐N'‐(3,5‐dimethylbenzoyl)‐N‐(4‐ethylbenzoyI) hydrazine], an aqueous flowable (2F) and an emulsion‐suspension (ES), were diluted with water to provide spray mixes containing dosage rates ranging from 35 to 150 g of the active ingredient (AI)/ha. The mixes were sprayed in a laboratory chamber, onto balsam fir branch tips collected from field trees and greenhouse‐grown seedlings. Droplet spectra and spray mass recovery were determined on artificial samplers. Simulated rainfall of two different intensities was applied at different rain‐free periods, and rain droplet sizes were determined. Foliar washoff of RH‐5992 was assessed after application of different amounts of rain, and the increase in soil residues was evaluated.

A direct relationship was indicated between the amount of rainfall and RH‐5992 washoff. The larger the rain droplet size, the greater the amount washed off. Longer rain‐free periods made the deposits more resistant to rain. Regardless of the amount of rainfall, rain droplet size and rain‐free period, foliar deposits of the 2F formulation were washed off to a greater extent than the ES formulation. The increase in soil residues due to foliar washoff was greater for the 2F than for the ES formulation. The deposits of the emulsion‐suspension were consistently more resistant to rain‐washing than those of the aqueous flowable formulation.