土壤溶解性有机质荧光特征及其与铜的络合能力

选取4种不同类型土壤和腐熟鸡粪,透析提取溶解性有机质(DOM),通过凝胶色谱、三维荧光光谱测定并分析了DOM的相对分子质量(M_r)分布、化学结构特征及其与铜的结合能力.结果表明,鸡粪DOM相对分子质量积分面积远高于其他样品,表现出其具有较高的有机物含量,泥炭土次之.暗棕壤、褐土和黑土较低,仅为鸡粪积分面积的4.5%~5%.鸡粪在中分子量段积分面积约占总物质的34.1%,低分子量段和高分子量段分别约占41.7%和24.2%.荧光光谱分析表明,各样品均出现类蛋白荧光峰(E_x/E_m=240~270/300~350 nm),在中、高分子量段(M_r500)暗棕壤存在的荧光峰消失.泥炭土出现了较为独特的可见光区类富里酸荧光峰(E_x/E_m=325/420 nm),该荧光峰和黑土的荧光峰在中、高分子量段(M_r500)都产生了红移现象.鸡粪分别出现了和黑土类似的紫外区类富里酸荧光峰,以及和泥炭土类似的可见光区类富里酸荧光峰,以及一类独特的类蛋白荧光峰(E_x/E_m=280/350 nm),但这种类蛋白荧光峰在中分子量段(500M_r12 000)消失.分析表明泥炭土与Cu的络合常数(lg K)为4.13,其他3种土壤与Cu的络合常数较小且差别不大,集中在2.10~3.10之间.鸡粪与Cu的结合能力最大,络合常数达到6.66.     

2015年石家庄市采暖期一次重污染过程细颗粒物在线来源解析

近年来,我国北方采暖期的大气污染问题备受关注.以2015年11月24日至12月4日石家庄地区一次重污染过程为例,采用大气细颗粒物实时在线源解析技术,对不同时段细颗粒物来源解析结果和各类源粒径分布、重污染期间各类源的质谱特征,结合气象条件进行综合分析.结果表明：重污染期间主要污染物来源为燃煤、工业工艺、机动车尾气和二次无机源;低压、静稳条件和低空传输共同作用下,以燃煤及工业工艺源排放颗粒物为主的细颗粒物严重累积,二次转化加剧,导致此次重污染的发生;来自燃煤源的颗粒物以混合碳为主,工业工艺源以金属为主,机动车尾气源以元素碳和金属锰为主,纯二次无机源以二次无机离子为主,来自扬尘源的颗粒物以铝、钙、铁和硅酸盐为主,生物质燃烧源以左旋葡聚糖LEV为主,餐饮源以有机酸为特征信号;与重污染前后不同,八类源于重污染发生期间在整个粒径段呈现均匀分布状态.     

选择性吸附法处理含表面活性剂和多环芳烃的土壤淋洗液研究

比较研究了H103树脂、活性炭、沸石、硅藻土和膨润土等5种吸附剂对土壤淋洗液中TX-100与PAHs的吸附性能.批实验结果表明,H103树脂、活性炭、沸石、硅藻土和膨润土吸附后,淋洗液中T-PAHs及TX-100浓度分别为0.03和0 mg·L~(-1)、0.16和3623 mg·L~(-1)、15.21和6175 mg·L~(-1)、15.98和6555 mg·L~(-1)、9.49和4332 mg·L~(-1),选择性吸附系数排序依次为活性炭膨润土沸石硅藻土H103树脂.其中,活性炭能够去除淋洗液中99%的PAHs,同时保留51.33%的TX-100回收再利用,选择吸附系数达到109.5.活性炭固定床实验中,由淋洗液溶质的穿透曲线计算出物质的吸附容量.当空隙体积为2.5-7PV时,活性炭能够去除淋洗液中72%的PAHs,同时保留81%的TX-100,平均选择吸附系数为10.08.由此可见,活性炭固定床可有效处理含表面活性剂土壤淋洗液中的多环芳烃,同时实现表面活性剂的回收再利用.     

典型软垫家具材料火灾特性的小尺寸实验研究

本文借助锥型量热计对制作软垫家具的材料进行小尺寸实验,获得了典型软垫家具面料、聚氨酯海绵填料及其组合件的燃烧性能参数。通过对实验获得参数的分析比较,认为面料对组合件燃烧特性的影响大,仅使用阻燃布就可以明显改善组合的火灾特性。     

Mass transport model of ions within biofilms under the effect of external field

A mass transport model was developed to predict the transport rate of ions within biofilms, which was experimentally verified using the fluxes of NH4^＋ and Ca^2＋ through the heterotrophic biofilms with the thickness varying from 230 to 1430μm under the effect of external field in the range of-20 V/m to 60 V/m. It is found that the result predicted by the model is in agreement with the experimentally obtained one, with the error less than 5 percent for the thin biofilms. The error increases with the increase of the biofilm thickness. The transport rate of ions caused by electric migration is affected by the charges, field strength, and biofilm thickness and so on.     

Selective extraction and separation of Fe, Mn oxides and organic materials in river surficial sediments

In order to investigate the adsorption mechanism of trace metals to surficial sediments （SSs）, a selective extraction procedure was improved in the present work. The selective extraction procedure has been proved to selectively remove and separate Fe, Mn oxides and organic materials （OMs） in the non-residual fraction from the SSs collected in Songhua River, China. After screening different kinds of conventional extractants of Fe and Mn oxides and OMs used for separation of heavy metals in the soils and sediments, NH2OH .HCl （0.1 mol/L） ＋ HNO3 （0.1 mol/L）, （NH4）2C2O4 （0.2 mol/L） ＋ H2C2O4 （pH 3.0）, and 30% of H2O2 were respectively applied to selectively extract Mn oxides, Fe/Mn oxides and OMs. After the extraction treatments, the target components were removed with extraction efficiencies between 86.09%--3.36% for the hydroxylamine hydrochloride treatment, 80.63%- 101.09% for the oxalate solution extraction, and 94.76%-102.83% for the hydrogen peroxide digestion, respectively. The results indicate that this selective extraction technology was effective for the extraction and separation ofFe, Mn oxides and OMs in the SSs, and important for further mechanism study of trace metal adsorption onto SSs.     

综合管廊内火灾自动报警探测器实验研究

为了能够有效提升综合管廊内火灾自动报警系统的准确性和可靠性,本文采用火灾实体试验的方法,通过对各类型火灾自动报警探测器响应时间的情况进行分析和比较,研究综合管廊电力舱内常用探测器的性能。研究结果表明:接触式缆式线型感温火灾探测器可以较早的探测到电缆温度异常变化的现象,可用于早期预警。点型感烟探测器对烟粒子浓度较为敏感,可用于综合管廊电力舱室的空间探测。分布式光纤型感温火灾探测器对明火温度的变化较为敏感,作为空间型的火灾探测器比较可靠。     

基于RFPA2D复合局部挠曲岩体数值模拟

为研究复合局部挠曲岩体强度特征以及破坏规律,采用岩石真实破裂软件RFPA^2D,对水平层面挠曲30°,45°,60°,75°的复合岩体进行单轴压缩试验模拟。模拟结果表明:挠曲角为30°,45°,60°,75°的复合岩体破坏面几乎与挠曲段夹层重合,其挠曲端部均产生了垂直于挠曲段夹层的裂纹;复合单斜岩体与复合挠曲岩体破坏面的形成因素大致相同,夹层强度是2种岩体失稳的主要因素;复合挠曲岩体单轴抗压强度随挠曲角增大同样呈“U”型变化,与单斜岩体变化趋势一致;当水平层状岩体发生挠曲后,其单轴抗压强度减小,当挠曲角为60°时,强度降低25.19%,当挠曲角为75°时,强度降低0.17%。;随着均质系数m的增大,复合挠曲岩体单轴抗压强度以及轴向应变均出现逐渐递增的趋势,且不同m值,其岩体裂隙扩展方式具有明显差别。     

液氮泡沫发生器内流动特性研究

低温液氮与泡沫混合液直接接触产生氮气泡沫是一种新型的掺混形式,利用液氮高汽化比的特点,搭建液氮泡沫可视化实验装置,进行氮气-水两相流及液氮泡沫流动特性的研究。结果表明,液氮相变产生大量氮气,其与泡沫液混合产生泡沫,温度有所回升,最终趋于泡沫混合液温度;管路沿程压降较小;液氮射流破碎及流动过程可分为6个区域:低温液氮区、向上循环翻滚区、滞留区、泡沫与泡沫混合液混合区、致密泡沫区、泡沫混合液区。流体向下游流动过程中持续发泡;为防止管路结冰,需合理控制泡沫混合液与液氮流量。     

Research based on double coverage rate and reliability of gas detector layout optimization

The gas detector layout should be highly attuned to combustible gas leakage and attain a good reliability in avoiding detector malfunction, which is an important guarantee for the normal production of the chemical industry and other related enterprises. Herein, a gas detector layout optimization method based on double coverage and reliability is proposed. The key gas leakage monitoring area is determined through layout scene field investigation. To improve the detection probability and detection system reliability, the dual coverage target and voting mechanism are set, and the gas detector layout is determined with the ray-casting algorithm according to the coverage target. Combined with FLACS software to simulate a variety of typical leakage conditions under different layout scenarios, the relationship between the leaked gas concentration detected by gas detectors in each layout scheme and time is obtained, and the gas leakage detection probability in each layout scheme, number of detectors that can trigger the alarm, shortest time to trigger the alarm and reliability are comprehensively evaluated. The decision-maker selects the final gas detector layout plan according to the evaluation results and actual site needs. The study shows that the detection probability of each layout scheme set according to the double coverage is high, and multiple detectors can trigger the alarm (up to 100%), which ensures that the alarm can be triggered within 10 s under all applicable conditions. According to the evaluation results, the decision-maker can obtain a layout scheme that not only agrees with the actual site conditions but also attains a high detection probability, short detection time and strong reliability.