7种指示性多氯联苯混合标准样品量值不确定度研究

分析并评估了异辛烷中7种指示性多氯联苯(PCBs)混合标准样品的量值不确定度。通过分析PCBs纯品中结构相似物、水分、无机物等杂质的含量,采用质量平衡法对PCBs纯品的纯度进行了定值。结果显示,7种指示性PCBs纯品的纯度为98.24%~99.92%,纯度不确定度为0.08%~1.28%。采用称量-容量法制备了各组分浓度均为50.0 μg/mL的异辛烷中7种指示性PCBs混合标准样品,全面分析了各组分的量值不确定度来源,主要包括样品配制、均匀性和长期稳定性等引入的不确定度。结果表明,该标准样品中,7种指示性PCBs组分的合成扩展不确定度为0.7~1.7 μg/mL。该标准样品量值准确且具有计量溯源性,可为我国PCBs相关国际履约监测和新污染物监测提供有效支撑。     

高分辨质谱在环境科学领域应用综述

探究复杂环境介质中有机污染物分析检测新方法,建立复杂环境介质中可疑和非目标化合物的快速筛选及确证方案,已成为环境科学领域的研究热点。高分辨质谱仪（HR-MS）具有质量范围宽、扫描速度快、灵敏度高等优点,使其在环境科学领域得到广泛应用。综述了混合高分辨率质谱（Q-TOF/Q Orbitrap）等HR MS技术的特点和工作原理,基于目标化合物分析、可疑化合物分析以及非目标化合物分析这3类研究策略,阐述了HR-MS在环境研究、药品监管及生物代谢物研究等领域的应用现状,进而分析了现阶段HR MS在环境科学领域中的应用局限性和发展前景。     

深井厚煤层大巷孤立煤体冲击危险性评价研究*

为了探究大采深条件下厚煤层大巷孤立煤体频繁发生冲击地压的原因,以梁宝寺煤矿35000采区为工程背景,采取现场实践、数值模拟等方法分析不同采深、煤厚、大巷间距等因素对大巷孤立煤体冲击地压的影响,提出深井厚煤层大巷孤立煤体冲击地压的危险性评价方法。研究结果表明:大巷孤立煤体的采深与垂直应力峰值呈正相关,采深1 200 m时煤体的垂直应力峰值是采深500 m时的3倍左右;大巷孤立煤体随着煤层厚度的增加,其应力集中程度不断升高,且应力峰值向煤体弹性承载区转移;大巷间距越小,孤立煤体弹性承载区应力越集中,发生冲击地压可能性越高;包含开采影响因素和煤层冲击倾向性的大巷孤立煤体冲击危险性评价方法符合现场实际情况,可为大巷孤立煤体冲击危险性评价提供1种思路。     

APEC会议前后北京地区PM2.5污染特征及气象影响因素

为分析APEC会议前后北京地区PM_2.5变化特征,利用中国科学院大学雁栖湖校区超级站在2014年10—12月的连续观测数据,对APEC会议前后北京地区污染物分布及变化特征、气象影响因素和气团传输路径特征进行了分析. 结果表明:APEC会议期间北京地区减排效果显著,ρ(PM_2.5)平均值比会前下降了60.5%. 气象条件对污染物扩散起到积极作用,APEC期间平均风速为1.40 m/s,平均相对湿度为31.9 %,近地面气象条件优于APEC会前、会后. 北京地区受到外来污染物输送的影响,在2.00~3.00 m/s的南风下易发生来自南部地区的PM_2.5和SO₂输送. APEC会议期间北京地区主要受来自西北地区的高速、高海拔气团控制,其出现频率为39.6%,远低于APEC会前 (15.9%)和会后(20.8%),而来自南部地区的低速、低海拔污染气团的出现频率仅为2.1%,扩散条件总体良好. 研究显示,除了减排措施有效削减了污染物排放以外,有利的气象条件也是APEC会议期间北京地区保持良好空气质量的重要因素.      

顶空固相微萃取-气相色谱-串联质谱法测定水中2,4,6-三氯酚

建立了顶空固相微萃取-气相色谱-串联质谱法(HS-SPME-GC-MS-MS)测定水中2,4,6-三氯酚的方法。优化条件下,在1. 00～50. 0μg/L质量浓度范围内线性响应良好(r~2=0. 999 1);检出限0. 224μg/L,测定下限0. 896μg/L;加标样相对标准偏差(RSD)为4. 15%～6. 24%;加标回收率为81. 0%～115%;单个样品检测总时间40 min。该方法萃取与气相色谱-串联质谱分析在线一步完成,操作简便、灵敏度高、抗干扰性强,适用于地表水、生活饮用水、工业废水等水体中2,4,6-三氯酚的检测。     

基于微震监测的岩体失稳智能预报

岩体稳定性预报是微震监测工作的重要组成部分。探讨微震活动性参数变化作为岩体稳定性预测的可行性,结合用沙坝矿实际生产过程中观测到的现象,提出微震监测岩体失稳预报的一般模式。根据b值在岩体失稳前先增大后减小的趋势作为危险预警初始条件;并将能量指数、施密特数急剧下降以及累积视体积增加的时间段作为岩体失稳的预警期,将事件数的急剧下降作为危险的临界状态。用沙坝矿根据这一原理建立的岩体失稳预报模式可以达到采场失稳的智能预报,解决了人工判别预警期过程中效率低的难题,保障矿山的生产工作。     

Ecological accounting: new tools for a sustainable culture

Ecological accounting is concerned with providing information to assist managers with performance appraisal, control, decision-making and reporting for an organisation or region. It is based on ecological concepts and on ecological measures and values in addition to the familiar economics ones. The implementation of sustainable development requires a cultural change and ecological accounting would represent a part of this change within both organisations and wider society. In many ways, ecological accounting could help bring sustainable development into common sense and give it a place as a day-to-day business goal.     

臭氧接触池臭氧投加方式的优化

臭氧接触池内臭氧(O₃)投加方式是影响臭氧接触池反应效率的关键因素. 以密云水库水为处理对象,对臭氧接触池内臭氧投加方式进行优化,通过考察气液接触方式和投加点个数对ρ(O₃)、传质效率及有机物去除率的影响,确定最优臭氧投加方式. 结果表明,适当增加布气点个数可有效增强气液传质,提高有机物去除率,但当布气点个数高于3个时,臭氧传质效率无明显提升,而且造成出水ρ(O₃)过高,不利于后续工艺的进行. 采用三段式臭氧投加方式,臭氧投加比为3∶3∶1时,密云水库水中臭氧传质效率达78.1%,有机物去除率为47.5%; 向密云水库水中添加3mg/L腐殖酸后,该投加比下臭氧传质效率为76.8%,有机物去除率为40.3%,出水ρ(O₃)为0.26mg/L,不会对后续工艺产生影响;并且该条件下臭氧利用率最高,BrO₃-生成量最低,为最佳臭氧投加比.      

Electrochemical hydride generation of tin(II) and its determination by electrothermal atomic absorption spectrometry with in situ trapping in the graphite tube atomizer

An electrolytic hydride generation system for the determination of tin(II) by means of batch electrochemical hydride generation-electrothermal atomic absorption spectrometry (EcHG-ETAAS) with in situ trapping in a graphite tube atomizer is described. The effects of four permanent chemical modifiers – palladium, tungsten, iridium, and platinum – for graphite tube treatment on analyte absorbance and the effects of four cathode materials, i.e., Pb, Sn, Pb–Sn alloy, and glassy carbon, are checked. Three electrolytes, i.e., nitric acid, sulfuric acid, and hydrochloric acid, are examined as catholyte solutions. The influence of several parameters on EcHG is investigated using multivariate and univariate methods. Interferences of some concomitant ions are evaluated. The calibration curve is linear from 1 to 200?µg?L^?1, with a detection limit of 0.8?µg?L^?1 and a relative standard deviation of 6.2% (n?=?3) for 100?µg?L^?1 Sn(II). The proposed method was successfully applied in the analysis of real environmental water samples and reference materials, and good spiked recoveries over the range of 93.1–115% were obtained. The proposed technique provides a means for developing hydride generation of other elements.     

Dispersive liquid–liquid microextraction of cadmium(II) for preconcentration prior to flame atomic absorption spectrometric detection in water

A dispersive liquid–liquid microextraction procedure for cadmium(II) as its 2-(5-bromo-2-pyridylazo)-5-diethylamino-phenol chelate is presented. Carbon tetrachloride and methanol were used as extraction and dispersive solvents, respectively. After phase separation, the preconcentrated-separated cadmium(II) is determined by flame atomic absorption spectrometry with a microinjection technique. The factors which affected the extraction efficiency, i.e. the pH of the sample solution and the volumes of reagent and sample were investigated. The effects of some alkali, alkali earth, and transition metal ions, and of some anions on the recovery of cadmium were also studied. A preconcentration factor of 250 was obtained for a sample volume of 50?mL under optimum conditions. The method was validated by analysis of certified reference materials and applied to some water samples from Turkey.