淮河流域旱涝易发区农田的陆气相互作用——CO2通量、能量交换和水汽输送的季节变化特征

利用淮河流域旱涝易发区的安徽省寿县农田下垫面陆气相互作用观测试验资料,重点分析观测期内CO2通量、能量交换和水汽输送的季节变化,并讨论了与此有关的辐射分量通量、下垫面反射率、波恩比、能量闭合守恒、土壤温度和土壤湿度的季节变化.结果表明CO2通量、能量分配受地表农作物长势影响明显,其中,水稻灌浆、成熟期,被稻田吸收的CO2通量最大可超过2 mg·m-2·s-1,潜热通量达到正的极大值.稻田光合作用最旺盛时期吸收的CO2通量和释放的潜热通量均大于小麦田光合作用最旺盛时期的对应量.较大土壤热通量对应于较低的土壤水含量.试验观测期的下垫面平均反射率为0.14.作物生长期,稻田表面潜热是下垫面吸收能量的主要消费者,小麦田表面潜热和感热相当.能量闭合率ε的变化范围为0.4～1.     

城市地下空间与节约型和谐社会建设——论中国城市地下空间的发展战略选择

进入“十一五”规划期,中国的大城市正面临着“建构资源节约型、环境友好型和谐社会”的重大战略转型。城市地下空间资源的综合开发利用是实现这一伟大战略目标的重要保障之一。作者在研究总结国外大城市地下空间资源综合开发利用成功经验与教训的基础上,分析未来中国城市发展趋势,论述城市地下空间资源综合开发利用的发展方向与战略目标,创造性的提出了实现这一伟大战略目标应该创建的中国式综合管理的体制、机制与法制。本文可供政府决策参考。     

西南某水电站岩体质量分级研究

介绍了水利水电工程地质分类、RM R分类和Q系统分类等3种分级法的具体使用和评价标准,并以西南某水电站为例,将这3种分类方法对其坝区围岩分类的结果进行了对比和相关性分析,得出了该水电站围岩合理、科学的评价分类结果。依据此评价结果,绘出了坝区岩体质量分级图,准确显示了坝区的岩体质量特征,证实了3种分级法在该类岩体分级的适用性和统一性。在充分调查和资料掌握的基础上,对岩体工程地质分类在实际工程中的应用提出了具体的指标和实际的操作法。     

BASE FLOW TRENDS IN URBANIZING WATERSHEDS OF THE DELAWARE RIVER BASIN1

Rapid land development is raising concern regarding the ability of urbanizing watersheds to sustain adequate base flow during periods of drought. Long term streamflow records from unregulated watersheds of the lower to middle Delaware River basin are examined to evaluate the impact of urbanization and imperviousness on base flow. Trends in annual base flow volumes, seven‐day low flows, and runoff ratios are determined for six urbanizing watersheds and four reference watersheds across three distinct physiographic regions. Hydrograph separation is used to determine annual base flow and stormflow volumes, and nonparametric trend tests are conducted on the resulting time series. Of the watersheds examined, the expected effects of declining base flow volumes and seven‐day low flows and increasing stormflows are seen in only one watershed that is approximately 20 percent impervious and has been subject to a net water export over the past 15 years. Both interbasin transfers and hydrologic mechanisms are invoked to explain these results. The results show that increases in impervious area may not result in measurable reductions in base flow at the watershed scale.     

水环境中26种类固醇激素的分析方法研究

建立了固相萃取-超高效液相-串联质谱法同时测定水环境中26种类固醇激素的分析方法。明确了取样体积为500 m L,Cleanert PEP为富集柱,乙酸乙酯为洗脱剂,甲醇为溶剂进行提取操作。选择了正离子模式,以0. 1%甲酸/甲醇-水为流动相,负离子模式以0. 1%氨水/乙腈-水为流动相,试样经AcquityTMUPLC BEH C18色谱柱分离后,选用质谱检测模式进行定性、定量分析。通过方法验证,26种类固醇激素的方法检出限为0. 3～1. 5 ng/L,测定下限为1. 2～6. 0 ng/L,代表性样品测定结果的相对标准偏差为2. 6%～13. 7%(n=6),加标回收率为71. 2%～121%。该方法操作便捷,灵敏度高,精密度和准确度良好,可适用于水环境中多种痕量、超痕量类固醇激素的定性定量分析。     

淮河流域旱涝易发区农田的陆气相互作用——CO_2通量、能量交换和水汽输送的季节变化特征

利用淮河流域旱涝易发区的安徽省寿县农田下垫面陆气相互作用观测试验资料,重点分析观测期内CO2通量、能量交换和水汽输送的季节变化,并讨论了与此有关的辐射分量通量、下垫面反射率、波恩比、能量闭合守恒、土壤温度和土壤湿度的季节变化。结果表明:CO2通量、能量分配受地表农作物长势影响明显,其中,水稻灌浆、成熟期,被稻田吸收的CO2通量最大可超过2 mg.m-2.s-1,潜热通量达到正的极大值。稻田光合作用最旺盛时期吸收的CO2通量和释放的潜热通量均大于小麦田光合作用最旺盛时期的对应量。较大土壤热通量对应于较低的土壤水含量。试验观测期的下垫面平均反射率为0.14。作物生长期,稻田表面潜热是下垫面吸收能量的主要消费者,小麦田表面潜热和感热相当。能量闭合率ε的变化范围为0.4~1。     

兰州市不同径粒大气颗粒物污染特征及气象因子的影响分析

空气污染程度与就诊率、呼吸道发病率及死亡率等有着密切的联系。兰州市在上世纪末曾被喻为卫星上看不到的城市,它的大气污染程度一直以来为人们所关注。利用2013年国家环保部公布的兰州市5个监测点（涵盖了4区1县）大气细粒子PM10及PM2.5的监测数据,针对全年的日均PM2.5与PM10质量浓度并结合了同期的气象因子进行分析研究,结果表明：春冬季为兰州大气中两种颗粒物的污染的高峰期（春季峰值为3月份,PM10及PM2.5质量浓度的月均值为309和103μg· m-3,超标倍数为1.062与0.436;冬季峰值为11月份,PM10及PM2.5质量浓度的月均值为203和85μg· m-3,超标倍数为0.353与0.7）,夏秋季为低谷（波谷为9月份,PM10及PM2.5的月均值为96和39μg· m-3,均低于国家标准）。PM2.5与PM10质量浓度比值均在0.4与0.5之间,呈一定的线性关系,大气污染较轻。当温度在-3~0℃之间时,大气中PM2.5与PM10质量浓度变化较剧烈。露点温度高于-3.15时,使得PM10的质量浓度下降明显;当日均露点温度高于1.85时,PM2.5的质量浓度随着露点温度的增大而降低,说明湿沉降对着两种粒子的清除作用明显。降水对大气中的两种颗粒物均呈现清除作用,但是在降水后PM10质量浓度迅速回升,但PM2.5质量浓度却变化不大。风向偏西时,大气中细颗粒污染物浓度增加。风速的增加对PM2.5有一定的清除作用,但由于兰州市的地貌特征,使得大气中PM10的质量浓度增加。上述结果为兰州市大气污染的监测与治理及大气污染预报提供了重要的依据。     

气相抽提去除红壤中挥发性有机污染物的去污机理探讨

通过探讨土壤气相抽提去除红壤中挥发性有机污染物的去污机理,建立了一维稳态条件下污染物在土壤多孔介质中传质的总微分方程,分别求出了平衡模型和动力学模型的解析解和数值解,并用实验结果对平衡模型和动力学模型进行了模拟和验证.实验结果和模型模拟结果表明理论模型与实验结果吻合良好,平衡模型和动力学模型在描述污染物在土柱通风过程中的传质时,分别适用于不同的阶段.在通风初期平衡模型能够很好地描述实验结果,而随着时间的推移,平衡模型的预测曲线逐渐偏离数据点,到了通风中后期,只有动力学模型才能够较好地描述和预测实验结果.     

Discovery of emerging organic pollutants in the atmosphere through an omics approach

● We review the framework of discovering emerging pollutants through an omics approach. ● High-resolution MS can digitalize atmospheric samples to full-component data. ● Chemical features and databases can help to translate untargeted data to compounds. ● Biological effect-directed untargeted analyses consider both existence and toxicity. Ambient air pollution, containing numerous known and hitherto unknown compounds, is a major risk factor for public health. The discovery of harmful components is the prerequisite for pollution control; however, this raises a great challenge on recognizing previously unknown species. Here we systematically review the analytical techniques on air pollution in the framework of an omics approach, with a brief introduction on sample preparation and analysis, and in more detail, compounds prioritization and identification. Through high-resolution mass spectrometry (HRMS, typically coupled with chromatography), the complicated environmental matrix can be digitalized into “full-component” data. A key step to discover emerging compounds is the prioritization of compounds from massive data. Chemical fingerprints, suspect lists and biological effects are the most vital untargeted strategies for comprehensively screening critical and hazardous substances. Afterward, compressed data of compounds can be identified at various confidence levels according to exact mass and the derived molecular formula, MS libraries, and authentic standards. Such an omics approach on full-component data provides a paradigm for discovering emerging air pollutants; nonetheless, new technological advancements of instruments and databases are warranted for further tracking the environmental behaviors, hence to evaluate the health risk of key pollutants.     

Integrated energy view of wastewater treatment: A potential of electrochemical biodegradation

• Energy is needed to accelerate the biological wastewater treatment. • Electrical energy input in traditional technology is indirect and inefficient. • Direct injection of electricity can be a game changer to maximize energy efficiency. • Microbial electrochemical unit for decentralized wastewater treatment is proposed. It has been more than one century since the activated sludge process was invented. Despite its proven stability and reliability, the energy (especially the electrical energy) use in wastewater treatment should evolve to meet the increasingly urgent demand of energy efficiency. This paper discusses how the energy utilized in conventional biological wastewater treatment can be altered by switching the indirect energy input to a direct electricity injection, which is achieved by the electrode integration providing extra thermodynamic driving force to biodegradation. By using electrodes instead of oxygen as terminal electron acceptors, the electrical energy can be utilized more efficiently, and the key of direct use of electrical energy in biodegradation is the development of highly active electroactive biofilm and the increase of electron transfer between microbes and the electrode. Furthermore, the synergy of different microbial electrochemical units has additional benefit in energy and resource recovery, making wastewater treatment more sustainable.