老挝铁矿资源与成矿预测

经资料整理与实地调研:老挝已发现铁矿床(点)42处。重要矿床为万象省(P.Vientiane)万荣(Vangviang)铁矿、川圹省(P.Xiangkhouang)富诺安(Phou.Nhouan)铁矿、万象省(P.Vientiane)帕莱(Pha Lek)铁矿、甘蒙省(P.Khammouan)班农洛(Ban Nonglao)铁矿。重要矿床的矿体呈似层状、脉状产出,矿石质量较好,矿床属接触交代矿床、热液矿床。据地层条件、岩浆岩条件、构造条件、铁矿床(点)的分布情况,老挝划分出琅勃拉邦(Louangphabang)、孟佩(Muang Pek)、桑怒(Xam-Nua)3个成矿预测区。     

辽宁省义县大铁厂地区金钼矿地质特征与找矿标志

辽宁省义县大铁厂地区金钼矿床为浅成中-高温热液石英脉型,受韧性剪切构造和岩浆活动控制。本文在详细研究了矿床地质及地球物理化学特征基础上,总结了该矿床的主要控矿因素并归纳了主要找矿标志,为进一步在该区找矿指明了方向。     

北武夷葛山坞萤石矿床地质特征及成因探讨

武夷山成矿带是我国十九个成矿带之一,分布着众多的萤石、叶腊石、石墨等非金属矿床及铜铅锌银等多金属矿床,矿床类型多样。本文在讨论葛山坞萤石矿成矿地质特征的基础上,对该矿床的成因进行了探讨,对北武夷地区下一步寻找萤石矿床具有指导意义。     

西藏自治区措勤县德能铜多金属矿床地质特征及成因分析

通过对西藏自治区措勤县德能铜多金属矿的研究发现,矿区内共6条达到工业品位的铜矿体,并伴生有铅、锌、金、银等多种有益组分,成矿地质条件较好。矿体主要赋存于燕山期石英闪长玢岩岩体外接触带及构造破碎带中,其中Cu4矿体规模最大,经深部钻孔工程及地表槽探验证,矿体品位和厚度沿走向和倾向变化系数较小。燕山晚期第一阶段第一次石英闪长玢岩侵入体是主要成矿物质来源,后期北西西向断裂构造是主要导矿和容矿构造。     

高径比对猪场废水脱氮与沼气脱硫耦联反应器的影响

采用填料鼓泡塔反应器研究其高径比对猪场废水脱氮与沼气脱硫耦联过程的影响,比较了3种不同高径比(8∶1、3∶1、2∶1)反应器的废水脱氮与沼气脱硫效能.在温度30～32℃、空塔停留时间6.70 min、水力停留时间3.35 d、沼气中H2 S浓度1 414～1 838 mg.m-3、进水NO x--N浓度114～243 mg.L-1的条件下,高径比2∶1反应器的运行较稳定,且处理效果较好,硫化氢去除率平均值为96.7%,NO x--N去除率平均值达到88.7%;而高径比8∶1和3∶1反应器的运行不太稳定,硫化氢去除率的平均值分别为68.0%、80.4%,NO x--N的去除率平均值分别为89.7%、90.2%.主要是因为高径比2∶1反应器的实际气速(3.12×10-2 m.s-1)比高径比3∶1、8∶1反应器的实际气速(分别为3.62×10-2 m.s-1和6.64×10-2 m.s-1)更慢,其气液传质系数(1.79×10-5 s-1)比高径比3∶1、8∶1反应器的气液传质系数(分别为1.64×10-5 s-1和1.55×10-5 s-1)更大,传质效果更好.处理效能试验结果以及反应器流体力学特征参数均表明,高径比2∶1反应器为最适合的反应器.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.     

Carbonyl sulfide and dimethyl sulfide fluxes in an urban lawn and adjacent bare soil in Guangzhou, China

Carbonyl sulfide (COS) and dimethyl sulfide (DMS) fluxes from an urban Cynodon dactylon lawn and adjacent bare soil were measured during April–July 2005 in Guangzhou, China. Both the lawn and bare soil acted as sinks for COS and sources for DMS. The mean fluxes of COS and DMS in the lawn (–19.27 and 18.16 pmol/(m2 sec), respectively) were significantly higher than those in the bare soil (–9.89 and 9.35 pmol/(m2 sec), respectively). Fluxes of COS and DMS in mowed lawn were also higher than those in bare soils. Both COS and DMS fluxes showed diurnal variation with detectable but much lower values in the nighttime than in the daytime. COS fluxes were related significantly to temperature and the optimal temperature for COS uptake was 29°C. While positive linear correlations were found between DMS fluxes and temperature. COS fluxes increased linearly with ambient COS mixing ratios, and had a compensation point of 336 ppt.     

利用铜矿尾砂研制低强度可控性填料

利用铜矿尾砂、粉煤灰、水泥以及加气剂等,混合搅拌成泥浆体,振动成型,制备出低强度可控性填料(CLSM).试验表明:以水泥12.9％、铜矿尾砂(细集料)22.6％、加气剂3.2％、粉煤灰12.9％等工业废弃物,加水48.4％,固液比控制在(14～15):(15～16)之间,制得的CLSM制品,抗压强度0.35～2.00 ...     

菌株Desulfovibrio sp. CMX的DNRA性能和影响因素

微生物的硝酸盐异化还原为铵(DNRA)过程对自然界中铵根离子的存在和转化具有重要影响,然而关于SRB菌株DNRA过程影响和机制尚未探明.本文考察了实验室筛选的SRB菌株Desulfovibrio sp.CMX的DNRA能力、影响因素及其影响机制.结果表明,无外加氮源的情况下,分别以10 mmol·L-1NO_3~-和NO_2~-作为唯一电子受体,菌株Desulfovibrio sp.CMX最终NH_4~+生成率分别达到85.8%和97.3%,且无N2和N2O等副产物产生.实验探究了不同外加氮源、不同初始浓度的SO_4~(2-)、S~(2-)对菌株DNRA过程的影响.酵母浸粉作为外加氮源可促进菌株的生长和代谢从而促进菌株DNRA过程;SO_4~(2-)对于NO_3~-还原为NO_2~-阶段起促进作用,而对NO_2~-还原为NH_4~+阶段起抑制作用,综合两方面影响,最终表现出对菌株DNRA过程的抑制作用;S~(2-)对菌株生长及DNRA过程都表现出抑制作用,且S~(2-)浓度越高抑制作用越强,当S~(2-)浓度达到6 mmol·L-1后,S~(2-)对于NO_3~-还原为NO_2~-阶段的抑制作用强于NO_2~-还原为NH_4~+阶段的抑制作用,NO_3~-还原为NO_2~-速率低于NO_2~-还原为NH_4~+速率,此时体系中不再有NO_2~-的积累.     

新疆香山铜镍矿区热液作用性质及其成矿潜力研究

香山铜镍矿床位于东天山土墩-黄山-图拉尔根铜镍矿带中部,具有较好的铜、镍资源前景。矿区内热液作用发育,出现大量蚀变矿物、含金属硫化物的石英/方解石脉状矿石贯穿基性岩石。通过对蚀变矿物特征、石英/方解石中流体包裹体、金属硫化物成分等研究,探讨热液作用性质及其成矿意义。研究表明,岩石蚀变矿物主要为蛇纹石(两个世代)、纤闪石、绿泥石和黑云母等,说明热液流体具有多阶段特征,含有一定量的卤素挥发分;矿石蚀变矿物主要为针镍矿、紫硫镍矿、红砷镍矿、辉砷钴矿等,说明热液流体的硫逸度逐渐增高;脉状矿石中,石英/方解石中以富液相流体包裹体为主,其大小为4~12μm,气液比5~15%之间,均一温度峰值为200~240℃,表明热液流体具有中高温性质。在对比邻区热液矿床流体包裹体特征和硫同位素组成的基础上,认为香山铜镍矿区内热液作用可能为与含铜镍拉斑玄武质岩浆相关的中高温热液事件,它具有富集Pt、Ag和Au的潜力。