UV-B辐射增强对芦苇生长及生理特性的影响

在UV-B辐射增强条件下,以芦苇为材料,研究了不同辐射梯度对芦苇生长及生理特性的影响.结果表明:与自然光照相比,UV-B辐射增强可显著降低芦苇植株高度、比叶面积、生物量,且高强度辐射处理的影响大于低强度辐射,随辐射时间延长,生物量分配有向地下部分转移的趋势;与自然光照相比,UV-B辐射增强可显著增加芦苇叶片丙二醛(MDA)含量、抗氧化酶活性(SOD、CAT、GR、APX)、抗氧化物质含量(GSH、As A),且随辐射强度增大,MDA含量、酶活性、抗氧化物质含量增强程度加剧,但随辐射时间延长,高辐射处理下,GR酶活显著低于对照,GSH也表现出相应的趋势;UV-B辐射增强条件下,类胡萝卜素含量显著降低,而类黄酮含量较对照组却显著升高,且高强度辐射处理对芦苇叶片紫外吸收物质的影响大于低强度辐射.     

腈纶废水溶解性有机物的分级解析及可生化性

采用超滤膜法将腈纶废水中溶解性有机物分离为6个不同相对分子质量组分,分析不同组分的溶解性有机碳、UV₂₅₄、SUVA含量和分布情况,应用紫外吸收光谱、傅里叶变换红外光谱等光谱学分析方法对各组分物质结构进行定性分析,评价各组分的可生化性.结果表明废水中以相对分子质量< 3kDa的有机物为主,占比为（56.75±1.38）%;相对分子质量为3k~10kDa的有机物占比为（25.76±1.40）%;相对分子质量> 10kDa的有机物占比为（17.49±0.98）%,且该组分有机物的芳香度高.不同相对分子质量组分的紫外光谱和红外光谱均呈现相似吸收峰,均存在酰基、羧基、羰基及芳香族化合物和不饱和双键类有机物.各组分可生化性结果表明,废水中相对分子质量> 10kDa有机物是腈纶废水低可生化性的主要原因,可能是造成腈纶废水难以达标排放的根源.研究结果可为该废水处理工艺的开发与优化提供重要的指导.     

高吸湿性树脂材料的研究进展

高吸湿性树脂材料是一种具有优异的吸湿、保湿性能的功能高分子材料,可以适用于不同吸湿需求的场合。综述了高吸湿性树脂材料的主要类型、研究状况及其存在的不足,探讨了高吸湿性树脂材料的吸湿机理,展望了高吸湿性树脂材料的发展和应用前景。     

Combined fluorescence and electrochemical investigation on the binding interaction between organic acid and human serum albumin

Human serum albumin (HSA) is a plasma protein responsible for the binding and transport of fatty acids and a variety of exogenous chemicals such as drugs and environmental pollutants. Such binding plays a crucial role in determining the ADME (absorption, distribution, metabolism, and excretion) and bioavailability of the pollutants. We report investigation on the binding interaction between HSA and acetic acid (C2), octanoic acid (C8) and dodecanoic acid (C12) by the combination of site-specific fluorescent probe, tryptophan intrinsic fluorescence and tyrosine electrochemistry. Two fluorescent probes, dansylamide and dansyl-L-proline, were employed in the displacement measurement to study fatty acid interaction with the two drug-binding sites on HSA. Intrinsic fluorescence of tryptophan in HSA was monitored upon addition of the fatty acids into HSA. Electrocatalyzed response of the tyrosine residues in HSA by a redox mediator was used to investigate the binding interaction. Qualitatively, observations made by the three approaches are very similar. HSA did not show any change in either fluorescence or electrochemistry after mixing with C2, suggesting there is no significant interaction with the short-chain fatty acid. For C8, the measured signal dropped in a single-exponential fashion, indicative of independent and non-cooperative binding. The calculated association constant and binding ratio is 3.1×106 L/mol and 1 with drug binding Site I, 1.1×107 L/mol and 1 with Site II, and 7.0×104 L/mol and 4 with the tryptophan site. The measurement with C12 displayed multiple phases of fluorescence change, suggesting cooperativity and allosteric effect of C12 binding. These results correlate well with those obtained by the established methods, and validate the new approach as a viable tool to study the interactions of environmental pollutants with biological molecules.     

主动脉动气流分选回收PC插槽中金属的实验研究

根现废弃电路板中金属与非金属的有效分选．对后续金属产品的分离提纯至关重要。为此,采用主动脉动气流对PC主板插槽破碎为5-0.5mm粒级的产品进行分选实验．并对实验结果进行正交实验设计和分析,考察不同气流速度和脉动频率对分选效率的影响,建立了综合分选效率经验模型。实验结果表明．在气流速度为2．90m／s,脉动频率为2．33Hz时,综合分选效率可达85．43％。同时,对正交实验的错配物含量进行计算,结果表明,当气流速度从2．76m／s增大到3．04m／s．脉动频率从1．96Hz增大到2．33Hz时,重产物错配物含量从23．70％减小到12．23％．而轻产物错配物含量从2．13％增大到3．86％。     

基于DEA-Malmquist的我国城市物质代谢效率评价

运用数据包络分析与麦氏指数(DEA-Malmquist),从"技术效率"、"技术变动效率"和"全要素生产率"三个方面,对我国34个城市从2005年到2007年的物质代谢效率进行实证分析,结果表明:物质代谢效率的总体水平不高,被评估的34个城市中有19个城市在评价期间是无效率的,主要分布在西部地区;并且整体而言,"全要素生产率"和"技术变动效率"要优于"技术效率";结果还表明:34个城市物质代谢的"技术效率"普遍处于中等水平,没有呈现出明显的空间分布差异,但是"技术变动效率"则在长三角地区的城市中体现出较为明显的优势,最后,提出了针对性的建议。     

厌氧氨氧化微生物在有机碳源条件下的代谢特性

通过多系列血清瓶实验并结合吉布斯自由能量分析探讨了厌氧氨氧化微生物在有机碳源条件下的代谢特性.实验结果表明：在葡萄糖作为有机碳源的条件下,低浓度的葡萄糖 (0.5 mmol·L-1) 能够促进厌氧氨氧化反应的速率,高浓度的葡萄糖 (≥1 mmol·L-1) 抑制了厌氧氨氧化活性;厌氧氨氧化微生物不仅具有厌氧氨氧化的代谢特性,还具有反硝化和硫酸盐还原的代谢能力.吉布斯自由能量分析表明： 在低浓度葡萄糖条件下,尽管最初厌氧氨氧化途径具有优势,但随后与反硝化途径展开竞争并处于劣势;在高浓度葡萄糖条件下,与厌氧氨氧化途径相比,反硝化途径完全占据优势;硫酸盐还原途径与厌氧氨氧化和反硝化途径相比不具有能量优势,只能发生在这两个途径之后.     

我国物质流研究述评

在分析我国近年来物质流研究成果的基础上,探讨目前研究存在的问题,并提出今后物质流研究应在以下几方面作出努力:建立学术平台、研究基地,加强学术交流;建立统一的分析和计算的框架和具体系数的估算方法;把物质流分析的成果与具有社会价值的经济、人口、土地等因素结合分析,与国外进行对比,找出我国的问题所在;建立我国或者特定区域的隐藏流系数的实时分析模型;物质投入产出表的编撰与研究;对我国未开展物质流研究的典型区域进行物质流分析。     

Significance of iron compounds in chemical and electro‐oxidation treatment of sugar industry wastewater: Batch reaction

Industrialization plays a major role in a nation's growth. However, with an increase in industrial activities, pollution levels are also increasing. Among all industries, the sugar‐processing industry is one that requires large amounts of water to process the sugar, and, consequently, it discharges large amounts of water as effluent. Highly polluted wastewater brings changes to the physicochemical characteristics of the surrounding environment. Iron compounds have had a significant impact when they are used in wastewater treatment in various applications, including when they are used to minimize the pollution levels in sugar industry wastewater (SIWW). To minimize the pollutant levels from SIWW, iron compounds have been key for uses in treatments involving chemical and electro‐oxidation. Two different methodologies of electrocoagulation and chemical coagulation have been used to treat SIWW. In electrocoagulation, an iron plate is used as an electrode material under specific operating conditions. Ferrous sulfate and ferric chloride have been used as chemical coagulants at various pH and mass loading levels. The use of iron metals shows an 82% reduction in chemical oxygen demand (COD) and an 84% reduction in color at the optimum condition of pH 6, an electrode distance of 20 millimeters, and a current density of 156 square centimeters. As a chemical coagulant, iron salt (ferrous sulfate) provides a reduction of 77% COD and a 91% reduction of color at pH 6 and a 40‐millimole mass loading. Electrochemical treatment using iron was found to be suitable to treat SIWW. The sludge generated after treatment can be burned or composted with the possible recovery of some of the treatment costs.     

二次电池电极材料环境影响计算系统

以生命周期评价理论为基础,建立了电极材料电化学性能与环境影响的内在量化关联关系分析方法。基于Java语言,设计和编写了二次电池电极材料环境影响综合计算系统,协调考虑了二次电池的循环特性、电化学特征等,实现了环境影响评价过程中对材料质量需求的便捷计算,进而实现了整个评价操作过程的综合化、软件化和信息化,提高了评价效率。选用LiFePO_4/C,LiFe_(0.98)Ti_(0.02)PO_4/C,LiFe_(0.98)Mn_(0.02)PO_4/C和FeF_3(H_2O)_3/C 4种正极材料基于此系统进行了实例应用。