危险品运输网络优化设计研究综述

为分析当今反恐新形势下的危险品运输网络优化设计问题的研究现状,系统总结国内外关于一般场景和恐怖袭击威胁2种情况下危险品运输网络优化设计研究的主要模型和方法,梳理两者现有的研究内容,并讨论其共性及恐怖袭击威胁情景下的研究的新特点。结果发现:目前关于解决危险品运输网络优化设计问题模型的鲁棒性研究较为缺乏,尤其是模型在更为复杂和不确定性更强的恐怖袭击情景中适用性不强;危险品运输的鲁棒优化模型即使在突发事件条件下,也可以使决策者能够作出相对满意的决策;鲁棒性危险品运输网络能够规避风险扰动,可用来防止在恐怖袭击中因危险品车辆爆炸等造成更大的危害。     

页岩气压裂作业人因失误结构化辨识方法研究

为提高页岩气压裂作业人因失误辨识结果的全面性和针对性,建立一种结构化的人因失误辨识方法。通过概括辨识阶段的作业流程,建立作业人员行为模型,概述作业人员的行为阶段。利用筛选出的引导词辨识行为阶段人因失误。将该方法应用于页岩气压裂过程的替液阶段。结果表明,用引导词能明确辨识方向,减少头脑风暴时间以及对专家知识的依赖;辨识过程的动态调整能改善认知可靠性,使更多人因失误模式(与传统CREAM方法相比)被辨识出来。     

Application of CFD on the sensitivity analyses of some parameters of the modified Hartmann tube

The aim of this work is to determine the influence of operating parameters such as the dispersion pressure, the ignition delay and height on the dust flammability. A Computational Fluid Dynamics (CFD) simulation, based on an Euler–Lagrange approach, was developed with Ansys Fluent™ and validated experimentally. Such analysis will facilitate the choice of the most conservative conditions for a flammability test. This paper is focused on a case study performed on wheat starch with the modified Hartmann tube. The dispersion process of the powder was studied with granulometric analyses performed in situ and high speed videos. Tests were performed with injections at gas pressure ranging from 3 to 6 bars and the evolution of the particle size distribution (PSD) was recorded at different ignition heights (5, 10 and 15 cm over the dispersion nozzle). The observations highlighted the presence of agglomeration/deagglomeration processes and dust segregation. Besides, a CFD simulation analysis was aimed at evaluating the impact of a set of parameters on the PSD and the local turbulence, which are closely linked to some flammability parameters. For this computational analysis, the CFD simulation was coupled with a collision treatment based on a Discrete Element Method (DEM) in order to consider the cohesive behavior of the combustible dust. Thus the results suggest performing the injection of the gases at approximately 5 bars for the flammability tests of wheat starch in order to obtain the finest PSD at a given ignition height. It is also shown that the finest PSD are obtained at 5 cm over the dispersion nozzle. However, the local instabilities and turbulence levels are so high during the first stages of the dispersion that the flame growth can be disturbed for short ignition delays. Moreover, the stabilization of the bulk of the dust cloud requires longer periods of time when the ignition sources are located at 15 cm. As a result, the recommended height to perform a flammability test is 10 cm in this case. Finally, this study proposes some tools that might improve the procedure of dust flammability testing.     

基于生活垃圾分类的厨余垃圾采样方法研究

与复杂的混合生活垃圾相比,厨余垃圾成分较单一,需要针对性的采样方法.本研究基于生活垃圾分类背景,在《生活垃圾采样和分析方法》(CJ/T 313—2009)的基础上,就采样位点和采样节点数对分类存放的厨余垃圾采样的影响展开研究.研究结果表明,仅采集垃圾桶中间位点的样品不具有代表性,不同情景应有不同的采样策略.当厨余垃圾流节点数少于2时需采集所有节点,当厨余垃圾流节点数为3~7时需采集2个节点,而当厨余垃圾节点数为8~18时需采集3个节点,均少于CJ/T 313—2009中要求的采样节点数.厨余垃圾的总量增大,则其最少采样节点数相应上升,但最少采样点受到厨余垃圾流节点数的制约.     

赤潮灾害经济损失评估技术方法

为有效应对赤潮灾害防灾减灾、灾后救援及管理的需求,在综合分析前人提出的赤潮灾害损失评估技术方法的基础上,参考赤潮灾害对受灾体的危害特点,结合实际工作的需求及在实际中可获取的业务数据,提出了赤潮灾害经济损失评估指标体系;根据灾害经济学理论,借鉴其他自然灾害经济损失评估的先进思想,采用市场价格法,分别建立了包括海水养殖业经济损失、滨海旅游业经济损失、赤潮灾害业务与应急监测费用和赤潮灾害处置费用的赤潮灾害经济损失评估模型;最后,提出了赤潮灾害损失评估的技术流程。     

基于水域面积法的山区河流水电站下游生态流量定值研究

水电站的大量兴建导致下游河道萎缩退化甚至断流,如何改变水电站运行调度方式,维持下游河道一定的生态流量、保障河流健康成为国内外普遍关注的问题.本文在传统水文学方法的基础上融入生物栖息地法思想,以河流生态系统的生物多样性为功能目标,用河道流量反映河流的水文过程,河道水域面积反映河流生态系统的生物多样性,创新性地提出考虑河道水文生态特性的生态流量定值方法——水域面积法.以北江上游浈江二级支流罗坝水为例进行分析计算.计算结果表明:枯水年罗坝水生态流量为2.26 m3·s-1,占多年平均流量的25.97%;平水年生态流量分月控制,生态流量过程与建站前流量过程基本一致.根据枯水年的生态流量值和平水年各月份的生态流量值,结合水电站的运行调度规则,换算成一定时期内的径流量来确定该时期内水电站需释放的水量,进而对水电站下游河道的生态功能进行保护和修复.     

管道中烟道气流动传热及酸凝结规律

针对注烟道气稠油热采中管道输送烟道气酸凝结问题,以连续性方程、能量方程和动量方程为基础建立了烟道气沿管道流动与传热计算模型,计算了烟道气沿管道的压力分布、温度分布和酸凝结点距离,分析了不同入口参数和烟道气成分对管道中烟道气的压力、温度、酸凝结点的影响。结果表明:SO3或水蒸汽含量增加时,烟道气酸凝结点温度提高,凝结点距离减小;入口烟道气压力提高,烟道气压降变小,温降不变,酸凝结点距离减小;入口烟温升高,压降和温降都增大,酸凝结点距离增大;保温层厚度增加,温降减小,酸凝结点距离增大。计算和分析结果表明:减少烟道气中SO3或水蒸汽含量可以有效地增大酸凝结点距离,减轻管道腐蚀问题。     

Applying a new method for direct collection, volume quantification and determination of N2 emission from water

The emission of N₂ is important to remove excess N from lakes, ponds, and wetlands. To investigate the gas emission from water, Gao et al. (2013) developed a new method using a bubble trap device to collect gas samples from waters. However, the determination accuracy of sampling volume and gas component concentration was still debatable. In this study, the method was optimized for in situ sampling, accurate volume measurement and direct injection to a gas chromatograph for the analysis of N₂ and other gases. By the optimized new method, the recovery rate for N₂ was 100.28% on average; the mean coefficient of determination (R²) was 0.9997; the limit of detection was 0.02%. We further assessed the effects of the new method, bottle full of water, vs. vacuum bag and vacuum vial methods, on variations of N₂ concentration as influenced by sample storage times of 1, 2, 3, 5, and 7 days at constant temperature of 15°C, using indices of averaged relative peak area (%) in comparison with the averaged relative peak area of each method at 0 day. The indices of the bottle full of water method were the lowest (99.5%-108.5%) compared to the indices of vacuum bag and vacuum vial methods (119%-217%). Meanwhile, the gas chromatograph determination of other gas components (O₂, CH₄, and N₂O) was also accurate. The new method was an alternative way to investigate N₂ released from various kinds of aquatic ecosystems.     

Preparation of steel slag porous sound-absorbing material using coal powder as pore former

The aim of the study was to prepare a porous sound-absorbing material using steel slag and fly ash as the main raw material, with coal powder and sodium silicate used as a pore former and binder respectively. The influence of the experimental conditions such as the ratio of fly ash, sintering temperature, sintering time, and porosity regulation on the performance of the porous sound-absorbing material was investigated. The results showed that the specimens prepared by this method had high sound absorption performance and good mechanical properties, and the noise reduction coefficient and compressive strength could reach 0.50 and 6.5 MPa, respectively. The compressive strength increased when the dosage of fly ash and sintering temperature were raised. The noise reduction coefficient decreased with increasing ratio of fly ash and reducing pore former, and first increased and then decreased with the increase of sintering temperature and time. The optimum preparation conditions for the porous sound-absorbing material were a proportion of fly ash of 50% (wt.%), percentage of coal powder of 30% (wt.%), sintering temperature of 1130°C, and sintering time of 6.0 hr, which were determined by analyzing the properties of the sound-absorbing material.     

大气颗粒物PM_(2.5)监测技术研究进展及展望

大气颗粒物已经成为中国的首要大气污染物,其中PM2.5污染越来越受到政府和相关部门关注,本文综述了国内外对大气颗粒物PM2.5的几种监测方法的研究进展,重点比较了各种监测方法的优缺点,并通过实例对比说明了β-射线法的可靠性及用膜片反演方法提高精确度的可行性,同时就加强国内PM2.5监测技术研究提出相关建议及展望。