金属冶炼进口物料的固体废物鉴别方法

建立了金属冶炼进口物料的固体废物鉴别方法,并利用该方法对海关查扣的3种金属冶炼进口物料进行了固体废物鉴别。鉴别结果显示:物料1、2和3的自然属性分别为砷含量超标铜精矿、锰阳极泥、回转窑氧化锌,产生来源分别为有害物质超标的产品、污染控制设施产生的物质、有意识加工的目标产物;物料1和2属于我国禁止进口的固体废物,物料3不属于固体废物。本文建立的固体废物鉴别方法可行,可为金属冶炼进口物料的固体废物鉴别和监管提供参考。     

Neural network forecasting of air pollutants hourly concentrations using optimised temporal averages of meteorological variables and pollutant concentrations

The new method for the forecasting hourly concentrations of air pollutants is presented in the paper. The method was developed for a site in urban residential area in city of Zagreb, Croatia, for four air pollutants (NO₂, O₃, CO and PM₁₀). Meteorological variables and concentrations of the respective pollutant were taken as predictors. A novel approach, based on families of univariate regression models, was employed in selecting the averaging intervals for input variables. For each variable and each averaging period between 1 and 97 h, a separate model was built. By inspecting values of the coefficient of correlation between measured and modelled concentrations, optimal averaging periods for each variable were selected. A new dataset for building the forecasting model was then calculated as temporal moving averages (running means) of former variables. A multi-layer perceptron type of neural networks is used as the forecasting model. Index of agreement, calculated for the entire dataset including the data for model building, ranged from 0.91 to 0.97 for the respective pollutants. As suggested by the analysis of the relative importance of the input variables, different agreements for different pollutants are likely due to different sources and production mechanisms of investigated pollutants. A comparison of the new method with more traditional method, which takes hourly averages of the forecast hour as input variables, showed similar or better performance. The model was developed for the purpose of public-health-oriented air quality forecasting, aiming to use a numerical weather forecast model for the prediction of the part of input data yet unknown at the forecasting time. It is to expect that longer term averages used as inputs in the proposed method will contribute to smaller input errors and the greater accuracy of the model.     

碱激发胶凝材料及其固化Pb^2＋的试验研究

对碱激胶凝材料（碱-偏高岭土、碱-矿渣和碱-粉煤灰）与水-水泥体系固化Ph^2＋进行了试验研究,其中水-水泥体系为对比样。结果表明：对于相同稠度的碱激发胶凝材料,即使Pb^2＋含量达到2．4％,除了碱-粉煤灰的抗压强度略低外,其他都达到30MPa以上,满足填埋或做建筑基材的使用要求;与水泥相比,碱激发胶凝材料能显著降低重金属离子（Ph^2＋）浸出浓度,其规律性与其NH4交换容量大小的规律性一致,与其固化体的抗压强度的大小没有相关性。     

复合材料静态处理煤矿高浓度含锰废水的研究

针对目前云南省某煤矿排放废水中Mn~(2+)超标的问题,利用一种新型复合材料进行除锰试验.该复合材料是纳米分子筛与硅藻土经合理复配后,掺入复配絮凝荆形成的.试验中优化了不同材料的复合方式、絮凝剂的复配比例与用量.利用复配的多孔材料,对云南某煤矿含有大量悬浮物、Mn~(2+)质量浓度为5.32 mg/L的黑色废水及Mn~(2+)质量浓度为42.mg/L的红褐色废水进行了Mn~(2+)去除效果研究.结果表明,黑色废水中Mn~(2+)去除率达到70%,出水pH值为7.9;红褐色废水中Mn~(2+)去除率达到91.0%,出水pH值为7.1.与此同时,还研究了废水中Fe~(3+)、固体悬浮物(SS)对Mn~(2+)去除效果的影响,废水中Fe~(3+)的存在使pH降低,并与Mn~(2+)产生竞争吸附,对复合材料除锰有不利影响,而SS的存在对Mn~(2+)的去除效果没有显著的影响.     

锰资源开发利用中存在的问题和对策——以秀山锰矿为例

针对秀山锰矿开采秩序混乱、效率偏低、矸石处理、电解锰渣堆存和生产废水、锰深加工路线不健全等特点,结合其他地区锰资源的开发利用情况,提出了秀山锰矿应扩大开采规模,规范管理,矸石用于充填安全柱,加高加固锰渣尾矿库,锰渣的资源化利用等措施;提取生产废水中的金属元素,减少废水产生量,废水达标处理和循环利用降低污染;依靠发展和扩大锰产业链,加大科技投入,促进秀山的可持续发展.     

燃煤锅炉机组电改袋工程成功案例分析

以宝钢电厂3#机组电改全袋工程为例,论述了该成功工程的特点,介绍了袋式除尘器及滤料的比选过程、结构型式和设计参数,总结了除尘系统所具有的技术特色和投运后所取得的效果,该案例对袋式除尘器在电站锅炉的推广应用具有参考意义。     

释氧材料修复地下水石油烃污染研究进展

石油烃对土壤和地下水的污染不断被重视,释氧材料作为一种强化生物修复技术正日益受到关注。文章介绍了释氧材料的发展史,阐述修复场地条件、地下水化学环境和材料释氧速率控制对修复效果的影响,并对该技术的发展进行了展望。     

Photocatalytic degradation of five sulfonylurea herbicides in aqueous semiconductor suspensions under natural sunlight

In the present study, the photocatalytic degradation of five sulfonylurea herbicides (chlorsulfuron, flazasulfuron, nicosulfuron, sulfosulfuron and triasulfuron) has been investigated in aqueous suspensions of zinc oxide (ZnO), tungsten (VI) oxide (WO₃), tin (IV) oxide (SnO₂) and zinc sulfide (ZnS) at pilot plant scale under natural sunlight. Photocatalytic experiments, especially those involving ZnO photocatalysis, showed that the addition of semiconductors in tandem with the oxidant (Na₂S₂O₈) strongly enhances the degradation rate of the herbicides in comparisons carried out with photolytic tests. The degradation of the herbicides follows a first order kinetics according to the Langmuir-Hinshelwood model. In our conditions, the amount of time required for 50% of the initial pesticide concentration to dissipate (t_½) ranged from 8 to 27 min (t_30W = 0.3-1.2 min) for sulfosulfuron and chlorsulfuron, respectively in the ZnO/Na₂S₂O₈ system. None of the studied herbicides was found after 120 min of illumination (except chlorsulfuron, 0.2 μg L⁻¹).     

利用剩余活性污泥生产一次性可降解材料

为了缓解污水处理厂日益严重的污泥处置难题,实现剩余活性污泥的无害化、减量化、稳定化、资源化利用。采用SBR系统对剩余活性污泥进行10 d的驯化,加入4.0 g/L的乙酸钠作为发酵培养基碳源和前体物质,累积聚羟基烷酸酯(polyhydroxyalkanoates,PHA)。30℃好氧发酵10 h后,PHA积累达1 125 mg/L,占污泥浓度(MLSS)的质量分数为35.7%。然后经过离心、烘干、粉碎后模压成型加工成一次性使用的可生物降解材料。使用正交实验进行优化,结果表明:其最佳的物料配比和模压条件为:干污泥57%;稻草纤维20%;聚乙烯醇(PVA)19%;硬脂酸钡2%;氧化钙2%;最佳工艺条件为100℃,加热1.5 h,此时加工出来的产品具有最优的抗压强度和拉伸强度。以本方法制成的可生物降解花盆其所含细菌总数、粪大肠菌群、蛔虫卵死亡率均达到国标所规定的污泥农用生物安全要求;另外,试样中未检出病毒;其重金属含量也达到国标所规定的污泥农用标准;其可生物降解性能达到了可降解材料的要求。因而本研究制备的一次性使用可降解花盆具有较好的开发和应用价值。     

火灾高温下CFRP加固钢筋混凝土梁温度场分析

综合国外CFRP加固混凝土结构抗火试验相关研究,总结了CFRP的高温热工性能参数。用ANSYS软件对火灾高温下不同情况(无防火保护层和有防火保护层)和不同工况(防火涂料涂抹形式)下CFRP加固后的钢筋混凝土梁进行了温度场数值模拟研究。结果表明,防火涂料厚40 mm时,梁耐火极限可达2.5小时以上,且底面和两侧面全面涂抹防火涂料的防火效果最好。本文研究有助于进一步深入认识CFRP加固钢筋混凝土结构在高温下的力学性能和耐火极限,且对CFRP加固后的结构防火设计具有一定的指导意义。