机械振荡对猕猴桃愈伤组织的生理效应

通过机械振荡处理中华猕猴桃（Actinidia chinensis planch)茎段的愈伤组织，研究模拟振荡方式的力学刺激对木本植物愈伤组织生长分化的生理生化效应。结果表明，猕猴桃对机械振荡的应激效应与本实验室此前对草本植物非洲雏菊（Gerbera jamesonii acrocarpous)的研究有相似的结果。即适度的机械振荡（频率2-3Hz)可促进猕猴桃愈伤组织的生长，使胞内可溶性蛋白质含量升高，SOD活性升高，而IAA氧化酶活性质膜的通透性降低；但当振动强度超过一定范围（3Hz)后，愈伤组织的生长受到明显的抑制，可溶性蛋白质含量下降，SOD活性降低，而IAA氧化酶活性升高，同时细胞膜的封闭和完整性受到损伤，透性增大，研究显示植物对外界应力刺激的响应（应激效应）是很明显的图1表2参17。     

铜、砷在水稻－土壤体系中的迁移及其对水稻影响的研究

通过盆栽试验和现场布点试验，研究了铜、砷在水稻－土壤体系中迁移的规律。结果表明，该体系对铜、砷污染具有相当大的缓解作用；土壤中水溶性可交换态铜、砷含量很低；铜、砷主要累积在水稻根部；土壤中铜、砷相互有拮抗作用，确定土壤铜、砷临界值应考虑多因素综合作用。     

机械镀锌工艺的清洁生产

结合机械镀锌的实际生产过程 ,讨论了机械镀锌实现清洁生产的主要途径 ,并且从工艺过程、经济效益、环境效益 3个方面对机械镀锌进行了综合评价 ,结果表明 ,机械镀锌是切实可行的清洁生产技术     

乌东矿急倾斜特厚煤层水平分段综放开采顶板破断特征研究

为研究急倾斜特厚煤层水平分段综放开采顶板破断特征,基于急倾斜特厚煤层工作面顶板赋存条件并结合弹性力学,建立了急倾斜特厚煤层水平分段开采顶板力学模型。通过力学模型分析,推导出急倾斜特厚煤层水平分段开采后顶板沿工作面倾向方向的岩板破断判据及挠度公式,应用三角级数方法对挠度公式进行求解,确定了顶板沿倾向方向上最大挠度发生的位置关系式。理论研究成果在乌东矿南采区B1+2急倾斜特厚煤层水平分段综放开采中的工程应用表明,工作面沿倾向方向上推进到385 m时顶板发生破断,倾向方向顶板最大挠度坐标位置为y=325.78 m,顶板沿工作面倾向方向的最大挠度位于采空区中部偏下位置。表现为急倾斜特厚煤层顶板在工作面上方的非对称性破断;相似材料试验进一步验证了顶板挠度公式的合理性。     

一种测定活性污泥中高等微生物活性的方法

采用机械破碎方式灭活活性污泥中高等微生物,并通过测定破碎前后泥样耗氧速率(OUR)之差别间接计算高等微生物的活性作用.实验结果表明,以分散机破碎活性污泥,高等微生物均可被有效地破碎灭活,且再培养138h后不再恢复.与此同时,对酵母菌破碎实验显示,机械破碎并未对其数量、形态以及活性产生太大影响,这表明机械破碎亦不会对个体尺寸比酵母菌更小的细菌构成任何影响.为使破碎前后活性污泥絮凝体形态基本一致,将破碎后的泥样经离心处理,以尽可能使絮凝体恢复如初(以SVI衡量).通过比较破碎前后泥样的OUR并计算可知,高等微生物活性相对于活性污泥总活性约占12%～14%.     

Behavioral pathways in bicycle-motor vehicle crashes: From contributing factors,pre-crash actions,to injury severities

Introduction: This study performed a path analysis to uncover the behavioral pathways (from contributing factors, pre-crash actions to injury severities) in bicycle-motor vehicle crashes. Method: The analysis investigated more than 7,000 bicycle-motor vehicle crashes in North Carolina between 2007 and 2014. Pre-crash actions discussed in this study are actions of cyclists and motorists prior to the event of a crash, including “bicyclist failed to yield,” “motorist failed to yield,” “bicyclist overtaking motorist,” and “motorist overtaking bicyclist.” Results: Model results show significant correlates of pre-crash actions and bicyclist injury severity. For example, young bicyclists (18 years old or younger) are 23.5% more likely to fail to yield to motor traffic prior to the event of a crash than elder bicyclists. The “bicyclist failed to yield” action is associated with increased bicyclist injury severity than other actions, as this behavior is associated with an increase of 5.88 percentage points in probability of a bicyclist being at least evidently injured. The path analysis can highlight contributing factors related to risky pre-crash actions that lead to severe injuries. For example, bicyclists traveling on regular vehicle travel lanes are found to be more likely to involve the “bicyclist failed to yield” action, which resulted in a total 44.38% (7.04% direct effect + 37.34% indirect effect) higher likelihood of evident or severe injuries. The path analysis can also identify factors (e.g., intersection) that are not directly but indirectly correlated with injury severity through pre-crash actions. Practical Applications: This study offers a methodological framework to quantify the behavioral pathways in bicycle-motor vehicle crashes. The findings are useful for cycling safety improvements from the perspective of bicyclist behavior, such as the educational program for cyclists.     

Advancing voluntary chemical governance? The case of the Swedish textile industry dialogue

Voluntary environmental governance is a widely used policy approach that has been criticized for its lack of effectiveness. This raises fundamental questions about how to design processes that can advance voluntary programmes in a way that makes them more successful. In this paper, we analyse a government-initiated dialogue process to phase out hazardous chemicals through voluntary action by the Swedish textile industry. The analysis shows that information transfer primarily motivated business participation, while consumer pressure, regulatory threats and traditions of government–business cooperation played minor roles. The institutional design of the dialogue ensured close interaction within a homogeneous group, but collective actions were limited by disagreement about the problems to be addressed, prior unilateral environmental commitments by leading companies, and ambivalent engagement. This case provides valuable insights into the effect of institutional design on the actual interplay between business and government and its effects on voluntary governance.     

高校食堂清洁生产行动方案的研究

高校食堂是高校建设的重要环节之一,清洁生产能更加有效的管理高校食堂.文章以南京某高校食堂为例,通过问卷调查和实地考察的形式,分析高校食堂各个过程能耗比例和污染物产生的原因,并且对高校食堂电消耗、一次性消耗品和固体废物提出具体措施.结果显示:清洁生产每年平均节约电费1.25万元;减少一次性用品并且每年平均增加收益2 058元;平均减少剩饭剩菜14.83％.     

“We can keep the fire burning”: building action competence through environmental justice education in Uganda and Germany

The global dimensions of climate change necessitate a response that takes national differences – social, economic, geographic, and cultural – into account. Action-oriented education has a key role to play in advancing citizen engagement in a culture of sustainability. This paper describes research conducted with one such education programme, Youth Leading Environmental Change (YLEC), which operates in six countries and engages university-aged youth in discussion and practice related to global sustainability, systems thinking, and environmental justice. YLEC aims to advance four key competencies; this paper focuses on the goal of action competence, which involves acquiring knowledge, reflecting on experience in the context of one’s values, envisioning alternative futures, and acting individually and collectively to advance those alternatives. The present article examines the impacts of YLEC on environmental action competence in two of the countries involved in this research: Uganda and Germany. In-depth interviews were conducted with participants in both countries to examine the development of action competence during and after the programme. Findings suggest that outcomes differed in each country, reflective of participants’ different lived experiences. YLEC effectively built on the conditions faced in each country to accompany youth to a higher level of awareness and action. These findings have implications for environmental education programmes striving to work with multiple nations and diverse participants.     

力学载荷条件下 EB-PVD 热障涂层损伤行为研究

目的研究力学载荷条件下EB-PVD热障涂层的损伤行为。方法采用电子束物理气相沉积工艺(EB-PVD)制备热障涂层(TBCs),利用SEM和体式显微镜对力学性能试验后带涂层试样的断口特征、裂纹形貌和金相组织进行观察,分析热障涂层在拉伸、持久和旋转弯曲疲劳等典型力学载荷条件下的损伤行为。结果在室温拉伸条件下,陶瓷层内先出现垂直于应力轴、沿柱状晶簇扩展的平行环状周向微裂纹,随着拉伸塑变量的增加,局部区域裂纹贯穿粘结层并进入合金基体;900℃高温拉伸条件下裂纹也产生于陶瓷层,但裂纹均钝化于粘结层与陶瓷层的界面,并穿透粘结层。在持久条件下,试样在弹性变形阶段涂层即发生开裂,随后沿着陶瓷层柱状晶簇间扩展,但未扩展至粘结层;在高温高周疲劳条件下,裂纹首先出现在粘结层,随后向基体逐渐扩展,扩展深度较浅,而基体疲劳裂纹在粘结层裂纹末端萌生并倾斜滑移扩展。结论提高粘结层韧性、减少粘结层中裂纹萌生和向基体扩展,是热障涂层材料和工艺优化的有效途径。