制革废水和印染废水的综合毒性评估及鉴别

研究采用成组生物毒性试验(发光菌急性毒性、斑马鱼幼鱼急性毒性,斑马鱼胚胎发育毒性和小球藻急性毒性),结合理化指标,通过毒性单位、平均毒性(average toxicity,Av Tx)、毒性指数(toxic print,Tx Pr)、最敏感的测试(most sensitive test,MST)和潜在毒性效应指数(potential ecotoxic effects probe,PEEP)对不同工艺阶段印染及制革废水进行毒性削减评估.结果表明PEEP能兼顾废水排放量与毒性效应,更为客观地表征了废水综合毒性,PEEP评价结果显示制革废水和印染废水的毒性削减率分别达到36.8%和23.2%.最后,以发光菌作为受试生物,采用毒性鉴别评估(toxicity identification evaluation,TIE)技术,对印染废水进行毒性鉴别.结果表明,印染废水中主要的致毒物质为非极性有机污染,其次为可滤性化合物,然后是重金属、氧化性物质以及挥发性物质.     

微气泡臭氧催化氧化-生化耦合工艺深度处理煤化工废水

采用微气泡臭氧催化氧化-生化耦合工艺对煤化工废水生化出水进行深度处理,考察耦合系统处理性能及不同臭氧投加量和进水COD量比值的影响.结果表明,微气泡臭氧催化氧化处理能够有效降解废水中难降解含氮芳香族污染物,去除部分COD并释放氨氮,显著提高废水可生化性,臭氧利用率接近100%,无需进行臭氧尾气处理;同时为生化处理提供充足溶解氧(DO),实现生化处理对COD和氨氮的进一步有效去除,生化处理无需曝气.在系统出水回流比为30%、臭氧投加量和进水COD量之比为0.44 mg·mg~(-1)的运行条件下,耦合系统处理性能较好.微气泡臭氧催化氧化处理对COD去除率为42.5%,臭氧消耗量与COD去除量比值为1.38 mg·mg~(-1),臭氧利用率为98.0%;生化处理对COD去除率为42.3%;耦合系统整体COD去除率为66.7%,最终平均出水COD浓度为91.5 mg·L~(-1),估算整体臭氧消耗量与COD去除量比值为0.68 mg·mg~(-1),具有较优的技术经济性能.     

Removal of perfluorinated surfactants from wastewater by adsorption and ion exchange——Influence of material properties,sorption mechanism and modeling

Perfluorooctane sulfonate(PFOS) has attracted increasing concern in recent years due to its world-wide distribution, persistence, bioaccumulation and potential toxicity. The influence of sorbent properties on the adsorptive elimination of PFOS from wastewater by activated carbons, polymer adsorbents and anion exchange resins was investigated with regard to their isotherms and kinetics. The batch and column tests were combined with physicochemical characterization methods, e.g., N_2 physisorption, mercury porosimetry, infrared spectroscopy, differential scanning calorimetry, titrations, as well as modeling. Sorption kinetics was successfully modelled applying the linear driving force(LDF) approach for surface diffusion after introducing a load dependency of the mass transfer coefficient βs.The big difference in the initial mass transfer coefficient βs,0, when non-functionalized adsorbents and ion-exchange resins are compared, suggests that the presence of functional groups impedes the intraparticle mass transport. The more functional groups a resin possesses and the longer the alkyl moieties are the bigger is the decrease in sorption rate.But the selectivity for PFOS sorption is increasing when the character of the functional groups becomes more hydrophobic. Accordingly, ion exchange and hydrophobic interaction were found to be involved in the sorption processes on resins, while PFOS is only physisorptively bound to activated carbons and polymer adsorbents. In agreement with the different adsorption mechanisms, resins possess higher total sorption capacities than adsorbents. Hence, the latter ones are rendered more effective in PFOS elimination at concentrations in the low μg/L range, due to a less pronounced convex curvature of the sorption isotherm in this concentration range.     

Quantum chemical investigation on photodegradation mechanisms of sulfamethoxypyridazine with dissolved inorganic matter and hydroxyl radical

Sulfamethoxypyridazine(SMP) is one of the commonly used sulfonamide antibiotics(SAs).SAs are mainly studied to undergo triplet-sensitized photodegradation in water under natural sunlight with other coexisting aquatic environmental organic pollutants.In this work,SMP was selected as a representative of SAs.We studied the mechanisms of triplet-sensitized photodegradation of SMP and the influence of selected dissolved inorganic matter,i.e.,anions(Br~-,Cl~-,and NO~-_3) and cations ions(Ca~(2+),Mg~(2+),and Zn~(2+)) on SMP photodegradation mechanism by quantum chemical methods.In addition,the degradation mechanisms of SMP by hydroxyl radical(OH·) were also investigated.The creation of SO_2 extrusion product was accessed with two different energy pathways(pathway-1 and pathway-2) by following two steps(step-I and step-II) in the tripletsensitized photodegradation of SMP.Due to low activation energy,the pathway-1 was considered as the main pathway to obtain SO_2 extrusion product.Step-II of pathway-1 was measured to be the rate-limiting step(RLS) of SMP photodegradation mechanism and the effect of the selected anions and cations was estimated for this step.All selected anions and cations promoted photodegradation of SMP by dropping the activation energy of pathway-1.The estimated low activation energies of different degradation pathways of SMP with OH·radical indicate that OH·radical is a very powerful oxidizing agent for SMP degradation via attack through benzene derivative and pyridazine derivative ring.     

Control of aliphatic halogenated DBP precursors with multiple drinking water treatment processes: Formation potential and integrated toxicity

The comprehensive control efficiency for the formation potentials(FPs) of a range of regulated and unregulated halogenated disinfection by-products(DBPs)(including carbonaceous DBPs(C-DBPs), nitrogenous DBPs(N-DBPs), and iodinated DBPs(I-DBPs)) with the multiple drinking water treatment processes, including pre-ozonation, conventional treatment(coagulation–sedimentation, pre-sand filtration), ozone-biological activated carbon(O_3-BAC) advanced treatment, and post-sand filtration, was investigated. The potential toxic risks of DBPs by combing their FPs and toxicity values were also evaluated.The results showed that the multiple drinking water treatment processes had superior performance in removing organic/inorganic precursors and reducing the formation of a range of halogenated DBPs. Therein, ozonation significantly removed bromide and iodide,and thus reduced the formation of brominated and iodinated DBPs. The removal of organic carbon and nitrogen precursors by the conventional treatment processes was substantially improved by O_3-BAC advanced treatment, and thus prevented the formation of chlorinated C-DBPs and N-DBPs. However, BAC filtration leads to the increased formation of brominated C-DBPs and N-DBPs due to the increase of bromide/DOC and bromide/DON.After the whole multiple treatment processes, the rank order for integrated toxic risk values caused by these halogenated DBPs was haloacetonitriles(HANs)》haloacetamides(HAMs) haloacetic acids(HAAs) trihalomethanes(THMs) halonitromethanes(HNMs) 》I-DBPs(I-HAMs and I-THMs). I-DBPs failed to cause high integrated toxic risk because of their very low FPs. The significant higher integrated toxic risk value caused by HANs than other halogenated DBPs cannot be ignored.     

我国工业危险废物的来源、处理及监管对策与建议

通过大量环境统计数据的分析,对我国工业危险废物的产生、综合利用、处置和贮存,从行业来源、区域分布进行了分析和总结。结合我国工业危险废物企业自建设施和政府集中处理设施处理情况,对我国工业危险废物的处理和环保监管对策提出了若干建议。     

北方高盐景观水体氮磷时空分布特征及富营养化评价

为掌握北方高盐景观水体的水环境状况,选取天津市中新生态城3个景观水体(清净湖、蓟运河和蓟运河故道)为研究对象,于2013年12月—2014年11月对其进行定期取样监测,开展水体氮磷污染特征分析及富营养化评价。结果表明:1)蓟运河、清净湖和蓟运河故道的TDS均值分别为3.42,4.64,20.2 g/L,属于高盐景观水体;2)水体TN和TP浓度逐月变化显著,水质整体上冬春季优于夏秋季,其中蓟运河TP和TN的浓度最大,且波动较大;3)根据TN/TP比值判定,研究区水体除清净湖在短时间表现为氮限制外,水体大部分时间段内表现为磷限制,P为主要限制因子;4)富营养化评价表明:水体均处于富营养状态,且有蓟运河蓟运河故道清净湖;5)相关性结果表明:TDS与电导率、水温及EI呈显著正相关,相关系数分别为0.905、0.822和0.645,盐度也是影响富营养化的关键因素。     

滇西北高原湖泊剑湖演变过程及其生态环境效应分析

以滇西北高原湖泊剑湖为研究区,1974—2015年间8期遥感影像为数据源,运用遥感和地理信息系统技术,研究剑湖湖泊近40年间的时空演变过程,探析剑湖湖泊的入湖污染物及其生态环境效应变化。结果表明:近40年来剑湖湖泊面积呈现先明显减少再增加后缓慢减少的变化规律,由1974年的504.47 hm~2减至2015年的451.72 hm~2;目前剑湖水体中COD含量较低,符合地表水环境质量Ⅱ类标准;TP含量满足Ⅲ类标准;TN含量仅可满足IV类标准;剑湖入湖的主要污染源是农村生活污染和农业面源污染;随着时间的演变剑湖湖泊TN、TP污染物浓度呈上升趋势,剑湖湖泊生态系统受到极大干扰。     

煤制烯烃废水处理与回用技术解析

针对煤制烯烃项目废水的来源及水质特点,从生化处理技术与回用处理技术方面阐述了煤制烯烃废水处理现状及存在问题,展望了煤制烯烃废水处理与回用技术未来发展方向,指出了新型脱氮工艺、膜集成工艺及分质结晶技术在煤制烯烃废水处理中的可行性,为煤化工废水处理与资源化利用提供理论参考。     

小城镇产业集群主要污染源筛查与影响分析

以郫县安德镇川菜产业园为研究对象,采用等标污染负荷法对污染影响进行了标准化评价。结果发现:川菜产业园主要的工业污染行业为豆制品加工行业,排污量为2 919.94 t/a,占总排污量的96.46%,等标污染负荷为9.83,占总污染负荷的92.83%,其中有6家企业为主要控制对象。对比分析发现,环境污染受企业规模、末端处理方式、废水排放量等多方面因素共同影响。所有污染因子中,BOD对环境的实质污染影响较大。该研究成果将为优化小城镇产业集群的规划、管理和污染物总量控制提供有价值的参考。