东部油田采出污水处理的长远对策

从综合治理，合理利用采出污水的长远利益出发，针对东部油田高含水阶段的新特点，提出地面高效处理，地下控水稳油相结合的治理策略，探讨了相关的技术和方法，并讨论了采出污水回注利用中应加强研究的几个问题。     

利用造纸黑液回收电镀废液中铬的研究

本文报道了利用造纸黑液回收电镀废液中铬的方法，阐明了造纸黑液中所含有还原性物质与Ｃｒ＾６＋的反应机理；讨论了进行反应的最佳条件以及采用这一方法对废液的治理效果。     

最佳钻井防污土建结构的设计及应用

设计了一种高效实用的钻井防污土建结构，该结构与原结构相比能杜绝处理渣泥流入废水沉砂池参与废水循环，也可防止废弃钻井液和掏罐泥浆水直接进入沉砂池，因此能更好地控制钻井废水浓度，一定程度上提高钻井废水处理达标率，同时该结构具有对处理水进一步隔油、净化等优点，现场推广应用后得到证实。     

从废感光胶片中回收银

研究了以Fe3 -乙二胺四乙酸二钠-N a2S2O3体系为浸取剂从废感光胶片中回收银的方法,考察了浸出银的最佳工艺条件。实验表明,当浸取剂中FeC l3.6H2O质量浓度为35g/L、N a2S2O3.5H2O质量浓度为150g/L、pH为7、固液质量比为3∶10时,浸取剂可重复使用6次,胶片上银的浸出率可达99%以上;浸取液中的银采用硼氢化钠还原回收,粗银粉配以熔剂高温熔炼可得到纯度达99.78%的银,银回收率达96.88%,回收银后的浸取液可循环使用。     

马头电厂废水处理系统介绍

介绍了河北马头电厂废水处理工艺系统流程、设计及系统调试运行指标。处理后的电厂废水作为循环冷却水的补水,减少了新鲜水用量和污水排放量，对北方地区厂区废水回收利用具有借鉴意义，在火电厂废水资源利用方面有很好的应用前景。     

河津发电厂废水零排放实施及建议

介绍了河津发电厂目前的用水、排水情况及工业废水零排放实施方案，对方案实施后的效果进行了预测，同时对废水零排放实施后运行中可能出现的问题进行了分析并提出了建议。     

加碱混凝沉淀工艺在处理含磷废水中的应用

介绍了加碱混凝沉淀法处理含磷废水的工艺。采用工艺处理效果好，出水稳定，经监测废水中总磷的去除效率可达96％，实际运行证明，该工艺是切实可行的。     

废纸造纸工业节水零排放技术

本文介绍了废纸造纸零排放技术的意义、零排放循环水处理需要解决的问题及工程实践情况。     

城市可降解生活垃圾的生物综合处理模式初探

针对现有城市生活垃圾处理方式的不足,结合垃圾生物处理特点,设计了集混合菌群降解、生物过滤除臭、污水回用及植被绿化于一体的立体处理体系。结果表明,该系统在城市生活垃圾的“三化”处理中具有显著的潜势:既使生活垃圾在食物链外形成安全的闭路循环,防止有害物质向人居环境入渗;同时,处理设施的立体化、终产物的生物转化以及即刻的市场效应,有效地增强了系统的消纳能力,缓解了传统处理方式对城市空间的压力。该系统对我国中小城市生活垃圾的综合利用具有积极的参考价值。     

Enzyme-Retted Flax Fiber and Recycled Polyethylene Composites

Municipal solid wastes generated each year contain potentially useful and recyclable materials for composites. Simultaneously, interest is high for the use of natural fibers, such as flax (Linum usitatissimum L.), in composites thus providing cost and environmental benefits. To investigate the utility of these materials, composites containing flax fibers with recycled high density polyethylene (HDPE) were created and compared with similar products made with wood pulp, glass, and carbon fibers. Flax was either enzyme- or dew-retted to observe composite property differences between diverse levels of enzyme formulations and retting techniques. Coupling agents would strengthen binding between fibers and HDPE but in this study fibers were not modified in anyway to observe mechanical property differences between natural fiber composites. Composites with flax fibers from various retting methods, i.e., dew- vs. enzyme-retting, behaved differently; dew-retted fiber composites resulted in both lower strength and percent elongation. The lowest level of enzyme-retting and the most economical process produces composites that do not appear to differ from the highest level of enzyme-retting. Flax fibers improved the modulus of elasticity over wood pulp and HDPE alone and were less dense than glass or carbon fiber composites. Likely, differences in surface properties of the various flax fibers, while poorly defined and requiring further research, caused various interactions with the resin that influenced composite properties.