煤矿矿井水除铁技术

本文从煤矿矿井水中铁的来发布和存在形式入手，剖析了接触氧化过滤除铁的机理，从曝气充氧方式，滤料选择，反冲洗条件及其参数确定等方面介绍含铁矿井水接触氧化除铁的技术关键，并结合工程实际证明该工艺技术的可行性和可靠性。     

住宅小区中水回用系统经济技术分析

中水回用作为一项保护环境、节约资源的措施,将有力地促进城市的可持续发展和加速生态城市的建设,是解决中国水资源危机的有效途径之一.文章着重对住宅小区的中水回用系统进行了经济技术分析.     

Graphical strategies for design of evaporation crystallization networks for environmental wastewater applications

This paper introduces graphical strategies for the design of an evaporation/crystallization network for ternary wastewater environmental applications. Sources, sinks and other streams are located on a ternary composition diagram. While a source is any wastewater stream that has the potential to be recycled, a sink is any unit in the process that can accept sources. The proposed methodology is extremely simple to understand and implement, as it only requires basic solid-liquid phase equilibria data and uses lever arm principles to generate alternative process designs. Geometric constructions are carried out on the ternary composition diagram and the respective lever arms are used to determine intermediate flow rates in the evaporation/crystallization network. The relative locations and flow rates of the sources and sinks under consideration, as well as the unique shape of the solid-liquid equilibrium, drive the design of the separation (via evaporation/crystallization) network. Some generic structures are proposed for a typical evaporation and crystallization network. Once the general problem statement has been defined, special cases consisting of a single source-single sink, single source-two sinks and two sources-single sink are described. These special cases are representative of commonly occurring industrial wastewater design problems. Several graphical insights are listed that allow one to represent evaporation and crystallization operations on a ternary triangular composition diagram and avoid mathematical complexity. The possibility of bypassing a part of the initial feed streams is also considered. Certain feasible composition regions are identified on the ternary composition diagram for cases dealing with multiple sources and sinks. The methodology is useful in pre-screening and eliminating certain sources/sinks and is readily applicable to cases with lower number of sources and sinks. A case study involving the ammonium nitrate manufacturing process is included to demonstrate the broad applicability and value of the proposed approach.     

催化技术在污染物治理应用的研究进展

对近年来催化技术在污染物治理应用的研究进展进行了综述,指出了现在研究中存在的主要问题,并对其前景进行了展望。     

城市生活垃圾无害化处理工艺

根据武汉市金口、郭茨口两个垃圾处理场情况 ,分析了城市生活垃圾处理现状及其危害 ,阐述了生活垃圾无害化处理工艺 ,提出生活垃圾无害化处理不仅可以实现资源的持续利用 ,而且奠定了城市可持续发展的基础     

废气污染控制高新技术的研究与应用

列举了大量的事实，重点介绍了几种高新技术在废气污染控制中的研究与应用，说明了向环保发展迟缓领挑战依赖于科学技术，而环保的发展又向科学技术提出了更高的要求。     

脉动跟踪除尘技术的应用研究

针对粉粒状物料在散装发送过程中 ,容易引起粉尘飞扬的问题 ,利用现代脉动跟踪技术和表面过滤技术 ,设计研制的除尘系统 ,始终将吸尘罩与料堆扬尘点的动态相对位置控制在合理的范围内 ,实现了粉粒状物流连续自动的、环保高效作用     

基于VFP的冷冲模模架数据管理系统的实现

以VFP(Visual FoxPro5.0)为开发平台，自行开发了冷冲模模架数据管理系统。之中简要介绍了VFP的主要特点，重点阐述了面向对象模架数据管理系统实现的主要技术。     

MCRC硫磺回收技术

介绍ＭＣＲＣ硫磺回收装置工艺特征，结合装置历次考核标定的情况，对装置负荷、回收率及尾气排放问题进行分析，并介绍了装置整改和完善情况。     

加压活性炭生物膜法处理DSD有机废水

采用加压活性炭生物膜法处理以对硝基甲苯磺酸盐为主的难降解的有机废水的研究,是在活性炭生物膜法处理有机废水基础上发展起来的新技术。本实验结果表明,在加压9.8×10~4Pa(1kgt/cm~2)的条件下,COD_(Cr)去除率为62％～70％,比常压活性炭生物膜法高20％～25％;其容积负荷Nv=1.7～2.9kgCOD/m~3·d,比一般活性污泥法高3～6倍。