放射性废水的膜处理技术研究进展

核燃料的生产、核电厂的运行、同位素的生产和使用等过程都会产生着大量的放射性废水,为了保护环境和人类健康,这些废水必须经过安全、经济和有效的处理处置.放射性废水传统的处理方法主要包括过滤法、离子交换法、蒸发法或这几种工艺的组合.近年来,膜分离技术在放射性废水处理中得到了广泛的研究,发达国家已有应用膜分离技术处理放射性废水的实例,而我国规模化应用的实例还很少见.本文首先介绍了放射性废水的来源及组成,分析了各种放射性废水处理方法的优势和不足,包括化学沉淀法、过滤法、离子交换法、蒸发浓缩法、吸附法、生物还原/吸附法和膜分离法等.在此基础上,重点介绍了各种膜分离技术,包括微滤、超滤、纳滤、反渗透、膜蒸馏等在放射性废水处理中研究与应用现状,对已有的文献资料进行了较系统全面的分析、归纳和总结,对各种方法的优缺点及适用范围进行了比较,对膜技术在放射性废水处理中的应用前景及问题进行了讨论.最后,简要介绍了放射性废水处理产生的浓缩产物的最终处理处置,对放射性废水处理技术未来的研究和发展方向给出了建议.     

荷电超滤膜对天然有机物去除及膜污染行为的影响

以Aldrich 腐殖酸溶液为水样,研究比较了溶液环境(pH值、离子强度和钙离子)对荷电改性再生纤维素超滤膜和传统中性未改性再生纤维素超滤膜过滤过程的影响.结果表明, ①pH值主要通过质子化作用影响荷电膜以及腐殖酸分子的荷电量,进而影响荷电超滤过程.溶液pH值从7.5下降到3.5时,荷电超滤膜对腐殖酸的截留率从92%减少到79%,超滤4 h时,膜通量下降从26%增加到36%.②离子强度的改变是通过影响腐殖酸分子的物化性质和静电屏蔽作用来影响超滤过程的.当溶液离子强度为0、 3和100 mmol/L时,初始截留率依次降低,分别为92%、 87%和48%,超滤4 h时,荷电超滤膜的通量下降依次增加,分别为26%、 35%和63%.③Ca2+浓度的影响,需要综合考虑静电屏蔽作用、Ca2+的架桥作用以及滤饼层的压实性等各方面的影响.④pH值、离子强度和钙离子对中性超滤膜过滤行为的影响趋势与荷电超滤膜相似,但其影响程度有着较大的差别.研究结果对荷电超滤膜技术在实际应用中选择合适环境条件提供了参考.     

臭氧/混凝预处理工艺降低膜污染的研究

采用臭氧和混凝工艺分别处理黄浦江原水后进行MF膜过滤试验,考察2种预处理工艺对有机物的作用,进而考察其对MF膜过滤特性的影响.结果表明,2种预处理工艺都存在一个使膜污染下降率达到最大的最佳投药量.2种预处理工艺中,混凝降低膜污染的效果要好于臭氧,这主要与2种预处理工艺所去除的有机物性质有关.黄浦江水中有机物相对分子质量主要集中在3×103～5×103范围内,膜化学清洗液的分析表明造成膜污染的有机物相对分子质量主要集中在4.5×103附近,臭氧对相对分子质量在3×103附近的有机物去除效果较好,而混凝主要去除5×103附近的较大相对分子质量的有机物,因而混凝对这部分污染膜物质的去除效果要好于臭氧,从而有效降低了膜污染.     

连续流膜生物反应器中好氧颗粒污泥的形成及机制探讨

为了探讨好氧颗粒污泥在连续流膜生物反应器(MBR)中的形成过程和机制,采用连续流试验的方法,研究了好氧颗粒污泥形成过程中膜反应器内污染物的去除效果和好氧颗粒污泥特性的变化,并对连续流MBR中好氧颗粒污泥的形成机制进行了探讨.结果显示,连续流MBR中好氧颗粒污泥的形成增强了MBR的运行稳定性和抗冲击能力.废水中微生物抑制...     

利用PCR-DGGE溯源典型农村塘坝饮用水中的污染

以华南地区典型农村塘坝饮用水为研究对象,采用基于大肠杆菌的两种特异性基因(β-D-葡萄糖苷酶编码基因uidA和膜外周磷通道蛋白编码基因phoE)的群体差异分析(PCR-DGGE),对饮用水中的污染情况进行了溯源研究.结果表明,采用富集培养的混合菌体DNA作为模板扩增大肠杆菌特异性基因更加实用.uidA和phoE的引物均...     

Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water

Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with di erent chemical reagents after ultrafiltration of algal-rich water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best performance (88.4% 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% 1.0%) was obtained when the membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the other hand, the microscopic analyses reflected that NaClO could e ectively remove the foulants accumulated on the membrane surface.     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

Fouling distribution in forward osmosis membrane process

Fouling behavior along the length of membrane module was systematically investigated by performing simple modeling and lab-scale experiments of forward osmosis （FO） membrane process. The flux distribution model developed in this study showed a good agreement with experimental results, validating the robustness of the model. This model demonstrated, as expected, that the permeate flux decreased along the membrane channel due to decreasing osmotic pressure differential across the FO membrane. A series of fouling experiments were conducted under the draw and feed solutions at various recoveries simulated by the model. The simulated fouling experiments revealed that higher organic （alginate） fouling and thus more flux decline were observed at the last section of a membrane channel, as foulants in feed solution became more concentrated. Furthermore, the water flux in FO process declined more severely as the recovery increased due to more foulants transported to membrane surface with elevated solute concentrations at higher recovery, which created favorable solution environments for organic adsorption. The fouling reversibility also decreased at the last section of the membrane channel, suggesting that fouling distribution on FO membrane along the module should be carefully examined to improve overall cleaning efficiency. Lastly, it was found that such fouling distribution observed with co-current flow operation became less pronounced in counter- current flow operation of FO membrane process.     

曝气膜生物反应器运行过程中污泥活性特征变化及其对膜污染的影响

研究了曝气膜生物反应器运行过程中活性污泥主要活性特征变化及其对膜污染的影响.通过排出剩余污泥的办法维持活性污泥浓度在4000 mg·L-1左右,并连续运行75 d.运行期间,每日检测活性污泥的各项性质指标便于反映污泥特性的变化.结果表明,随着反应器运行时间的延长,污泥脱氢酶活性逐渐增加,其对反应器的运行有着两方面的作用,一方面会强化微生物对污染物的去除,但另一方面则导致了胞外聚合物的增加,并加速膜污染.而污泥表观产率则随着运行时间的延长先增加后有所减少,其粒径逐渐减小,且胞外聚合物呈现增加的趋势,总的出水水质情况逐渐提高,与此同时,反应器内原生动物及后生动物在运行前期较少,而在后期大量出现.膜污染分析结果表明运行后期膜污染速度明显加快,其原因在于:污泥粒径的减小以及胞外聚合物的增加导致细小颗粒及胞外聚合物堵塞或在膜表面沉积数量增加.