控制摩托车污染的途径

阐述了摩托车发动机污染控制技术的发展趋势，分析了不同摩托车的工作原理和结构特点，有针对性地提出了减少在用车污染的对策，根据实践经验和摩托车发动机的排放特点，探讨了如何使用催化净化技术控制排放的问题。     

MBR处理抗生素废水实验研究

以沈阳某制药厂为例,以制药厂废水处理工程UASB出水为原水,开展了MBR处理抗生素废水小试实验,对CODcr去除效果、氨氮去除效果以及膜的清洗与再生进行了研究。研究表明：当进水CODcr负荷小于7kg/m·3d时,出水CODcr在40mg/L以下,出水氨氮在40mg/L以下,处理效果良好;采用5%NaOH以及0.5%NaClO溶液作为化学清洗药剂时,清洗效果较好。     

膜生物反应器脱氮效能的实验研究

介绍了在实验室中采用膜生物反应器与A/O法结合处理生活污水的运行情况,研究膜生物反应器脱氮效能,借以为后续的研究及应用提供参考。     

空分装置爆炸危险与防控分析

分析了空分装置可能发生设备爆炸的部位及形成爆炸的原因,指出碳氢化合物（尤其是乙炔）的积聚是导致空分装置爆炸的主要因素,提出了防止空分装置爆炸的安全防控措施。     

化工生化尾水中溶解性有机污染物的富集分离

采用液液萃取法和树脂吸附法对化工园区的生化尾水中溶解性有机污染物进行富集、分离,通过气相色谱-质谱分析表明化工生化尾水中普遍含有四氯乙烯、苯类和烷烃类有机毒物,而不同来源的化工生化尾水中疏水性、亲水性和中性有机质的含量相差较大,分子量分布也不相同,液相色谱-质谱分析表明树脂富集分离后,氨基酸、邻苯二甲酸酯和糖类物质成为尾水中主要有机物。     

正渗透膜分离技术及其在水处理中的应用与研究

渗透是一种仅依靠渗透压驱动的分离过程,基于渗透现象发展起来的正渗透膜分离技术,目前在国际上得到了广泛的研究。文章综述了正渗透膜分离过程的基本原理、影响因素以及国际上的应用研究现状,并展望了未来该领域的研究方向。     

高磷赤铁矿选矿酸性废水处理的试验研究

文章采用自主开发的原位生成型动态膜反应器对高磷赤铁矿选矿酸性废水处理进行了实验研究。实验研究结果表明:选矿酸性废水除磷效果与脱磷剂的投加量、速度梯度(G值)、反应时间及pH等因素有关。对于pH2.25~2.56、含磷50mg/L的模拟选矿废水,最佳反应时间1h,速度梯度(G值)63.6,脱磷剂最佳投加量为11.25g/L,废水脱磷率92.47%。选矿酸性废水处理后出水pH升高,不利于实现废酸全部回用。     

Integration of biological method and membrane technology in treating palm oil mill e uent

Palm oil industry is the most important agro-industry in Malaysia, but its by-product–palm oil mill e uent (POME), posed a great threat to water environment. In the past decades, several treatment and disposal methods have been proposed and investigated to solve this problem. A two-stage pilot-scale plant was designed and constructed for POME treatment. Anaerobic digestion and aerobic biodegradation constituted the first biological stage, while ultrafiltration (UF) and reverse osmosis (RO) membrane units were combined as the second membrane separation stage. In the anaerobic expanded granular sludge bed (EGSB) reactor, about 43% organic matter in POME was converted into biogas, and COD reduction e ciency reached 93% and 22% in EGSB and the following aerobic reactor, respectively.With the treatment in the first biological stage, suspended solids and oil also decreased to a low degree. All these alleviated the membrane fouling and prolonged the membrane life. In the membrane process unit, almost all the suspended solids were captured by UF membranes, while RO membrane excluded most of the dissolved solids or inorganic salts from RO permeate. After the whole treatment processes, organic matter in POME expressed by BOD and COD was removed almost thoroughly. Suspended solids and color were not detectable in RO permeate any more, and mineral elements only existed in trace amount (except for K and Na). The high-quality e uent was crystal clear and could be used as the boiler feed water.     

Emergency membrane contactor based absorption system for ammonia leaks in water treatment plants

Because of the suspected health risks of trihalomethanes (THMs), more and more water treatment plants have replaced traditionalchlorine disinfection process with chloramines but often without the proper absorption system installed in the case of ammonia leaksin the storage room. A pilot plant membrane absorption system was developed and installed in a water treatment plant for this purpose.Experimentally determined contact angle, surface tension, and corrosion tests indicated that the sulfuric acid was the proper choice as the absorbent for leaking ammonia using polypropylene hollow fiber membrane contactor. Effects of several operating conditionson the mass transfer coefficient, ammonia absorption, and removal efficiency were examined, including the liquid concentration,liquid velocity, and feed gas concentration. Under the operation conditions investigated, the gas absorption efficiency over 99.9%was achieved. This indicated that the designed pilot plant membrane absorption system was effective to absorb the leaking ammonia in the model storage room. The removal rate of the ammonia in the model storage room was also experimentally and theoretically foundto be primarily determined by the ammonia suction flow rate from the ammonia storage room to the membrane contactor. The ammoniaremoval rate of 99.9% was expected to be achieved within 1.3 h at the ammonia gas flow rate of 500 m3/h. The success of the pilot plantmembrane absorption system developed in this study illustrated the potential of this technology for ammonia leaks in water treatmentplant, also paved the way towards a larger scale application.     

膜生物反应器中膜组件性能的对比研究

膜生物反应器中不同膜组件对废水的处理效果不同。论文主要对膜生物反应器中分别产自日本和德国的聚乙烯中空纤维膜膜组件处理生活污水的情况进行了考察,在给定的水力停留时间、污泥浓度、pH值等参数的条件下,对其膜组件性能进行了对比研究。通过对生活污水的降解试验发现,在相同的条件下,两种膜组件在浊度的去除方面均达到100%,并且系统处理出水COD均<50mg/L,去除率可分别达到86%和85%,但对氨氮去除两者均未达到60%,另外两种膜组件的膜通量的衰减相差较大,日本膜组件的衰减较缓慢而德国膜组件的衰减很快。