β-环糊精接枝羧甲基壳聚糖吸附剂的制备及其性能

采用γ-氨丙基三乙氧基硅烷化学修饰活化后的硅胶,以戊二醛为交联剂,接上羧甲基壳聚糖,继而接枝上β-环糊精作为功能单体,制备了一种用于分离富集水样中Cu(Ⅱ)的固相萃取新材料。利用红外光谱(FT-IR)、比表面分析(BET)、X射线衍射光谱(XRD)以及热重分析(TG)等方法对吸附剂进行结构表征。采用火焰原子吸收(FAAS)作为检测手段,考察了溶液p H、振荡时间、吸附剂用量、样品流速、洗脱液浓度和体积等对吸附剂吸附Cu(Ⅱ)的影响。吸附剂饱和吸附容量为9.37 mg/g,最大富集倍数高达350。吸附过程能用准二级动力学模型和Langmuir等温吸附方程进行很好的拟合。应用于环境水样中Cu(Ⅱ)的分离富集与测定,回收率在96.8%~105.2%之间,效果较好。     

TiO2介孔球的合成及其对双酚A的光催化降解

以不同的含钛化合物作为原料,在无模板条件下经一步溶剂热法合成了两种TiO2介孔球——TiO2-1和TiO2-2。对两种TiO2介孔球的形貌进行了表征,结果表明:TiO2-1和TiO2-2粒径分别为5.7 nm和8.0 nm;比表面积分别为159.4 m2/g和128.3 m2/g;孔径约为4.0 nm和5.0 nm。采用P25型TiO2、TiO2-1和TiO2-2对双酚A溶液进行光催化降解反应。在催化剂加入量为0.5 mg/L的条件下降解60 min,双酚A去除率分别为76.3%,99.7%,98.5%。TiO2-1和TiO2-2的光催化效果优于P25型TiO2,且TiO2-1的光催化效果更好。     

高分子树脂与介孔分子筛吸附-脱附VOCs性能对比

采用溶剂热法制备介孔聚二乙烯基苯(PDVB)树脂,并以介孔分子筛MCM-41、SBA-15为参照,从吸附-脱附甲苯、邻二甲苯、均三甲苯性能和高湿度下的疏水性能方面对其进行对比研究.结果表明,PDVB具有最大的比表面积1219.1m2/g,其对低浓度甲苯吸附量约为介孔分子筛的2倍,同时吸附性能几乎不受水汽影响.随着VOCs分子尺寸增加,3种吸附剂对VOCs的饱和吸附量均有所增加,但PDVB的穿透吸附量明显高于分子筛.热重分析表明,在200℃以下3种吸附剂上吸附的有机分子均能脱附完全,具有优良的脱附再生性能.     

崇明东滩海三棱藨草生物硅分布及季节变化

利用Na2CO3连续提取法,分析了崇明东滩海三棱藨草(Scirpus mariqueter)体内生物硅(BSi)含量与分布特征.结果表明,BSi在海三棱藨草体内的分布存在明显的季节变化差异,在生物体中连续积累是BSi的一个主要特征.地上部分BSi含量变化范围为0.26% ~ 0.93%,地下部分为0.31% ~ 0.92%,果实中则为0.24% ~0.43%.地上部分含量明显高于其他部分,说明BSi主要沉积在蒸发强烈的叶片中,植株个体生长阶段是决定地上部分BSi含量的主要因素.统计分析显示,根际沉积物BSi和植物各器官BSi相关性均显著,说明海三棱藨草依从主动吸硅机制,从根际沉积物获取所需的Si.地上、地下部分BSi含量与有机氮(ON)、C/N、土壤温度、植株高度也存在明显的相关性.     

聚丙烯塑料-锯末干混合制备高介孔率柱状活性炭

以聚丙烯塑料和梧桐锯末为原材料,无水K2CO3为活化剂,采用干混合法制备高介孔率柱状活性炭.通过单因素实验,探究了塑料含量、盐料比、活化温度及活化时间对活性炭吸附亚甲基蓝(MB)性能的影响.结果表明:当塑料含量为20%、盐料比为2.5、活化温度为950℃、活化时间为80 min时,所制备的活性炭具有较高的MB吸附量(322.9 mg·g-1).所制备的活性炭具有发达的微观孔隙结构,其比表面积达到1461.99m2·g-1,平均孔径为3.23 nm,总孔容为1.04 cm3·g-1,其中,介孔孔容为0.80 cm3·g-1,介孔率超过70%,充分说明该方法可制备优质高介孔率柱状活性炭.     

Glucose production from hydrolysis of cellulose over a novel silica catalyst under hydrothermal conditions

A novel silica catalyst was synthesized by evaporation-induced self-assembly (EISA) method and tested for the catalytic selective hydrolysis of cellulose to glucose. This silica catalyst exhibited a higher catalytic activity than other oxides prepared by the same method, such as ZrO₂, TiO₂, and Al₂O₃. Using silica as a catalyst, cellulose was selectively hydrolyzed into glucose with a glucose yield as high as 50% under hydrothermal conditions without hydrogen gas. The silica catalyst was characterized by Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results of temperature-programmed desorption of ammonia (NH₃-TPD) and textural properties indicated that the synergistic effect between strong acidity and a suitable pore diameter of the silica catalyst may be responsible for its high activity. In addition, the catalyst was recyclable and showed excellent stability during the recycle catalytic runs.     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.     

奶牛粪高温堆肥保氮与除臭技术实验研究

采用高温堆肥模拟试验研究了有效微生物EM和两种调理剂稻草、蚯蚓粪在奶牛粪堆肥中保氮和除臭的效应及各自适宜的添加比例。结果表明,在高温条件下,EM、稻草和蚯蚓粪均可明显降低奶牛粪中NH3和H2S的挥发,EM各添加比例的NH3去除率为7.06%～11.80%,H2S去除率为5.30%～10.81%;稻草各添加比例的NH3去除率为11.76%～66.03%,H2S去除率为10.63%～60.28%;蚯蚓粪各添加比例的NH3去除率为10.07%～50.75%,H2S去除率为13.95%～56.78%。同时,随着添加比例的提高,有效微生物EM、稻草和蚯蚓粪对NH3和H2S的去除率增大,达到奶牛粪堆肥中最大的保氮除臭效果时,EM的添加比例为3%、稻草的添加比例为30%、蚯蚓粪的添加比例为10%。     

改性磁性纳米颗粒固定内生菌Bacillus nealsonii吸附废水中Cd2+的特性研究

从重金属超累积植物龙葵体内提取内生菌Bacillus nealsonii,采用二氧化硅改性纳米Fe_3O_4颗粒与海藻酸钠将其包埋交联进行固定化,制得一种新型球状生物吸附剂,并应用于废水中Cd~(2+)的吸附处理.同时,通过正交实验研究了该球状生物吸附剂的最佳制备条件和吸附处理条件,并采用扫描电镜等表征手段与构建吸附动力学考察了其吸附特征.结果表明,球状生物吸附剂的最佳制备条件为:改性纳米Fe3O4颗粒质量分数为0.1%,海藻酸钠质量分数为8.0%,菌液接种量为0.4%,交联时间为2 h;其最佳吸附处理条件为p H=6、吸附时间12 h、吸附剂用量(干重)2.5 g·L-1,在Cd~(2+)初始浓度为50 mg·L-1时的吸附率可达96%以上.研究发现,球状生物吸附剂的内外部结构孔隙率较大,有利于促进Cd~(2+)的吸附.该吸附过程遵循准二级反应动力学,以化学吸附为主,符合Freundlich等温吸附模型,最大单分子吸附量可达13.02 mg·g-1.解吸实验结果表明,该吸附剂具有较好的可重复利用性.     

Intervention of pentoxifylline on silica-induced inflammatory reaction and apoptosis

Pentoxifylline (PTX) is a clinically used drug mainly for peripheral circulation improvement. This drug also possesses potent anti-inflammatory effects and was found to inhibit acute lung injury induced by chemical agents in animal models. Since it is also a potential apoptosis enhancer, this study was designed to examine the influence of PTX on silica-induced lung inflammation and pulmonary leucocyte apoptosis. Male Wistar rats were intratracheally instilled with either silica dust suspension or saline and intraperitoneally injected with saline or PTX. These treatments continued for six weeks and all rats were then sacrificed to obtain bronchoalveolar lavage cells and lavage fluid. Data demonstrated that PTX attenuated silica-induced lung injury in the rat model and this attenuation may possibly be attributed to its role in the enhancement of pulmonary apoptosis. As a known clinically safe drug, PTX may thus have potential use in the treatment of human silicosis.