基于土壤重金属特征的绿色食品产地环境评价——以重庆(江津)现代农业园区为例

以重庆市江津区现代农业园区内4种农用地类型的653个表层土样为研究对象,测定土壤重金属元素含量.依据绿色食品产地环境相关标准,采用重金属污染指数法对标准中所涉及的Cu、Cr、Cd、Hg、As和Pb共6种重金属元素开展土壤环境质量评价和潜在生态风险评价,并结合用地类型确定绿色农产品生产的适宜性土壤分区.结果表明：除元素Cu、Cr和As外,其他元素的平均含量均高于重庆市土壤背景值;除元素As和Hg外,其他元素的平均含量均高于我国土壤背景值.土壤重金属元素Cu、Cr、Cd、Hg、As和Pb的平均浓度均达到《绿色食品产地环境质量》标准要求,但Cd污染已处于安全警戒线内,应高度警惕和严格监管园区内该元素的污染.水田、旱地和果园的土壤环境均以尚清洁为主,其他园地的土壤环境以轻度污染水平为主.部分水田存在一定程度的Pb污染（轻度）、Hg污染（中度）和Cd污染（中度）,旱地存在一定程度的Hg污染（中度）和Cd污染（中度）,果园和其他园地的土壤存在一定程度的Cd的轻、中度污染.全区符合《绿色食品产地环境质量》标准要求的土壤面积为12.47km²,占农用地总面积的63.64%,旱地、果园、水田和其他园地中符合该标准的面积分别占各自总面积的84.83%、68.07%、56.51%和42.09%.4种用地类型的土壤环境生态风险水平均以低等为主,共占研究区总面积的74.70%.Cd和Hg在园区表层土壤重金属生态风险评估中占有较大的贡献率,应列为优先控制污染元素并对其生态效应开展进一步研究.     

电化学微传感器检测水中痕量铜离子

为改善微电极在阳极溶出伏安法检测重金属离子过程中低电流响应和低电催化能力的缺点,提出了一种在碳纤维微电极表面合成还原氧化石墨烯/纳米金材料制得还原氧化石墨烯纳米金修饰碳纤维微电极（rGO/AuNPs CFMEs）的方法.通过SEM表征,所制备的rGO/AuNPs CFMEs具有比表面积高、吸附能力强和催化活性好的特点,因此改性微电极适合作为方波阳极溶出伏安法（SWASV）测定水中铜离子（Cu²⁺）的工作电极.在构建微传感器测试水中痕量铜离子系统后,对pH值、电导率、富集时间和富集电位等检测条件进行了优化.在pH值为4,电导率为36.1S/m,富集时间为360s,富集电位为-1.2V的最佳条件下,铜的线性范围和检出限分别0~1.0μmol/L和2.4nmol/L.此外,微传感器的可重复性、长期稳定性以及选择性也得到了验证.     

联合改良剂对桉树吸收重金属的作用——以矿区土壤中Cd、Zn和Cu为例

通过5种矿区土壤的盆栽试验,研究了联合改良剂对桉树部分生理指标、根中Cd、Zn和Cu的含量、以及土壤中Cd、Zn和Cu的BCR提取形态的影响,探讨了其对矿区土壤还林的作用.结果表明,与对照相比,施用改良剂后桉树的生物量和叶绿素含量的增幅分别为-7.6%~158.8%和-0.7%~23.1%,丙二醛含量的降幅为2.6%~37.9%,其中部分处理的生物量和丙二醛含量的变化达到显著水平（P<0.05）;土壤中有效态Cd、Zn和Cu的含量分别下降12.5%~63.8%、1.6%~54.7%和16.2%~57.6%,桉树根中Cd、Zn和Cu的含量分别下降3.1%~56.6%、-1.5%~21.3%和9.3%~50.1%.土壤对桉树根中Cd、Zn和Cu的含量有显著影响（P<0.05）,改良剂的配比或施用量无显著影响（P>0.05）,但在5种矿区土壤中G3降低桉树根中Cu含量的效果优于G1和G2;在重金属含量最高的2种土壤中,G1降低桉树根中Cd和Zn含量的效果优于G2和G3.研究表明施用联合改良剂能降低桉树对重金属的吸收,有利于矿区土壤的还林.     

构树修复对重金属污染土壤环境质量的影响

通过温室盆栽试验,研究构树（Broussonetia papyrifera）生长对重金属污染土壤酶活性和微生物群落结构的影响.结果表明,构树修复污染土壤中酶活性和微生物多样性明显提高.经270d培养后,构树生长土壤中蔗糖酶和酸性磷酸酶活性与种植土壤相比分别显著（P<0.05）提高3.12倍和2.29倍;土壤脱氢酶与有效态As、Cd、Pb、Zn和Cu含量,蔗糖酶与有效态Cd含量,以及磷酸酶与有效态Cd和Cu含量之间呈显著负相关（P<0.05）.根据16S和18S rDNA PCR-DGGE分析表明,构树修复可提高污染土壤中细菌和丛枝菌根真菌多样性.上述结果表明,构树修复可有效改善重金属污染土壤的环境质量.然而,污染土壤中重金属有效态含量下降不明显,必须辅助物理和化学措施来强化构树对重金属污染土壤的生态修复潜力.     

南昌市冬季大气PM2.5中重金属元素来源分析及健康风险评价

采集2015年南昌市冬季大气PM_(2.5)样品,利用电感耦合等离子体质谱仪(ICP-MS)测定样品中重金属(V、Mn、Cr、Co、Ni、Cu、Zn、Cd、Ba和Pb)的含量,分析重金属的分布特征和来源,并对重金属健康风险进行评价。结果表明:采样期间PM2.5浓度总平均值为(29.74±16.82)μg/m~3,其中省外办最高,武术学校最低;各重金属元素总体平均浓度从高到低次序为:ZnPbCuMnBaNiVCrCdCo。因子分析结果表明:PM_(2.5)中重金属元素的来源包括道路交通尘和冶金化工排放、机动车尾气以及混合源。健康风险评价结果显示:PM_(2.5)中Mn对人体健康存在非致癌风险,其他元素(Cr、Ba、Co、Pb、Cd、Cu、V、Zn、Ni)基本没有非致癌风险;Cr对人体有较明显的致癌风险,Cd、Ni和Co对部分年龄段的人群(尤其是成年人)存在一定的致癌风险。     

印制电路板海洋环境试验与实验室环境试验相关性研究

目的研究机载电子设备印制电路板西沙海洋大气环境与实验室环境试验的相关性。方法在西沙海域环境下开展两种印制电路板的棚下暴露试验,暴晒试验时间为3年,同时在实验室开展盐雾试验,分别通过测试绝缘电阻、品质因数研究两种试验环境的相关性。结果将以绝缘电阻、品质因数为基准相关性评价结果进行平均,得出印制电路板实验室加速试验和自然暴露试验存在着强相关。两种样品的加速系数分别是3.5,5.15。结论建立了印制电路板在西沙海洋环境试验和实验室盐雾环境试验的相关性,可为后续西沙环境试验的加速处理提供依据。     

FRP加固金属结构技术应用研究进展

从FRP加固金属结构设计研究、界面性能研究、工艺研究、耐久性研究等4个方面回顾了FRP加固金属结构技术的发展历程。探讨了FRP加固技术的优势,总结了现阶段FRP修复技术取得的成就和现阶段发展存在的不足。最后,对未来FRP修复技术的发展做了总结。可以预见,随着高性能FRP的不断研制成功以及研究的深入,FRP修复技术必将得到更广泛的应用。     

Trace Metal Concentration in Roadside Surface Soil and Tree Back: A Measurement of Local Atmospheric Pollution in Abuja, Nigeria

Cadmium, copper, lead, nickel and zinc concentrations were analysed by atomic absorption spectrophotometry in surface soil and tree bark from different districts of Abuja, Nigeria, in order to determine the atmospheric trace metal input in the area.Elevated concentrations of some of the studied metals were observed in the soil and tree bark samples from the commercial/high traffic areas of the city compared to backgroundvalues. In soil samples, the average concentration of the metals were 0.6±0.4, 18.0±4.0, 281±39, 16±4 and66±23 g g^-1 dry weight for Cd, Cu, Pb, Ni and Zn, respectively, whilst the average concentrations in tree bark were 0.3±0.2, 12±4, 133±32, 13±3 and 61±10 g g^-1 dry weight for Cd, Cu, Pb, Ni and Zn, respectively. The trend in trace metal levels suggested that automobile emissions are a major source of these metals as the highest concentrations of Pb and Zn were recorded in the commercial areas of the city known for their high traffic densities. The levels of metal in the study area were relativelylow compared to levels found in some larger and older cities in various countries worldwide.     

Competitive Retention of Lead and Cadmium on an Agricultural Soil

Lead and cadmium contamination of an agricultural soil has been studied using batch and column experiments. Thermodynamics of theretention phenomena may be represented by a Langmuir isotherm foran aqueous metal concentration up to 100 mg L^-1. First order kinetics with respect to the solid phase yield good predictabilityfor both batch and column experiments. Kinetics and thermodynamics of lead retention predominate over those ofcadmium. As a consequence, lead is preferentially retainedand can even displace sorbed cadmium. In the event of anspill involving both metals, cadmium would move further inthe soil and its aqueous concentration downstream could beeven higher than that of the influent solution, increasingpotential risks. A two-region model has been used to fit all the experimental results. Satisfactory predictions for column experiments are obtained with parameters which are consistent with those obtained for the batch experiments, for which sorption is described by a Langmuir isotherm including competitive retention.     

Metal Pollution Assessment of Sediment and Water in the River Hindon, India

The metal pollution in water and sediment of the River Hindon in western Uttar Pradesh (India) was assessed for Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. The metal concentrations in water showed wide temporal variation compared with bed sediment because of variability in water discharge and variations in suspended solid loadings. Metal concentrations in bed sediments provided a better evaluation of the degree and the extent of contamination in the aquatic environment, Santagarh and Atali being the most polluted sites of the river. The ratio of heavy metals to conservative elements (Fe, Al, etc.) may reveal the geochemical imbalances due to the elevated metal concentrations normally attributed to anthropogenic sources. Metal/Al ratios for the bed sediments of the river Hindon were used to determine the relative mobility and general trend of relative mobility occurred Fe > Mn > Zn > Cr > Ni > Pb > Cu > Cd.