Chemical Composition and Acidity of Rain at the Gulf of Iskenderun,North-East Mediterranean

The purpose of the present work was to investigate the chemistry of rain in the Gulf of Iskenderun, North East Mediterranean, Turkey. The Gulf region has a large number of industries. Main industries existing in the region are iron and steel works, fertilizer plants, a cement plant, and several medium and mini size steel mills in addition to the international pipe line terminals. This study aims to apportion the local sources contributing to the overall pollution of the region. To this end a precipitation sampling program was started in January 2000, and over 48 precipitation samples were collected from each of 5 stations located at Iskenderun city center, Iskenderun industrial zone, Payas city center, the campus of Iskenderun Technical College and the campus of Mustafa Kemal University. Samples were analysed for pH, NO₃ ⁺, Cl^-. Ca, Al, Ba, Na, Cd, Co, Cr, Cu, Pb, Li, Mg, Mn, Ni, Zn, Fe, K. Concentrations of metal ions were determined by ICP-AES. NO₃ ^- ions and pH were determined by using NO₃ ^- selective electrode and pH meter, respectively.pH values of the collected samples at the industrial zone and at Payas city center, ranged between 5.02 and 7.38, respectively. NO₃ ^- and metal ions concentrations were highly variable. Concentrations of Ca and Fe ions were higher in the industrial zone and Payas city center. In the other three stations, concentrations of metal ions and NO₃ ^- ion were lower than that of industrial zone and the values of pH ranged between 6 and 7.4. The average pH values at Iskenderun Gulf showed that the precipitation was not acidic, because of the high concentration of Ca. The highest concentrations of Na and Cl ions were recorded in the University campus because the campus is located by the Mediterranean Sea.     

三峡库区降雨径流水体中铜、锰、镍、锌、铅含量及分布特征

本文按时段和随机采集了三峡库区降雨径流水体样品，测定了水体中Ｃｕ、Ｍｎ、Ｎｉ、Ｚｎ、Ｐｂ含量，统计结果表明：Ｍｎ、Ｚｎ、Ｐｂ在径流水体中的含量趋于平均，变异系数较小。随产流时间的变化，水体中５种元素的变化规律不明显     

水环境中重金属的生物积累研究及应用

本文综述了水环境中重金属在水生生物体内（包括鱼类的鳃、软体动物及贝类的肾、肝和肌肉等组织器官）蓄积研究现状及蓄积规律。利用生物积累的特性，为重金属污染的防治及生物监测提供参考。     

半敞开烟气排放的测试方法的研究

综合分析了除尘系统进入的烟尘量、排放方式、排放浓度等5个参数及其相互关系,根据在一定时间内进入除尘系统烟气烟尘的量;对除尘器进口和出口即百叶窗内各方向烟尘浓度的测试,利用物料平衡方程,确定百叶窗内各测点各方向测定的烟气烟尘浓度,确定半敞开排放烟气烟尘的排放浓度,笔者发现,外排烟尘浓度与百叶窗内侧向烟尘浓度具有良好的线性关系,百叶窗内侧向测定烟尘浓度能够反映半敞开烟气排放浓度。据此,提出以半敞开方式排放烟气烟尘的除尘系统烟气烟尘浓度测试方法,即侧向间接测试法。     

煤气管道带气抽堵盲板、开孔接管中的安全技术

生产或使用煤气的工业企业常常需要带气抽堵盲板和开孔接管作业。此类特殊作业存在中毒、着火、爆炸的危险性，为了安全、高效地实施此类作业，本文结合企业15年安全作业的实践，系统地总结了作业的方案制定、主要准备工作、作业过程的控制等方面措施和内容，并总结了相关安全技术问题的一些做法和体会。     

玉米芯为碳源实现酸性矿山废水生物处理

引入了一种新的碳源——玉米芯，对SRB法处理酸性矿山废水进行了更加深入的探索，分析了各种参数条件对s暖一还原效果的影响，确定了常温下这种碳源所需要的最适宜工况条件，探讨了硫酸盐矿山废水的水质资源化问题，并对山西矿山废水的生物治理进行了可行性实验验证。实验证明，玉米芯为碳源时，矿山废水中SO^2-4的出水值可达221．1mg／L，金属离子的浓度也都达到了生活饮用水的质量标准，所以玉米芯可作为酸性矿山废水资源化生物处理的合适有效碳源。     

人工湿地控制非点源污染的应用

随着点源污染的有效管理和控制，非点源污染已成为水环境污染的主要原因。人工湿地作为一种控制水环境非点源污染的有效工具，已被世界上很多国家所认可。本文首先简述了非点源污染的危害，其次对人工湿地的概念和类型进行了介绍，论述了人工湿地对非点源污染中氮、磷、重金属和农药等主要污染物的去除机理，最后对人工湿地处理系统的附属设施、水力因素、表土层以及植物收割等应用问题进行了探讨。     

铅锌矿产资源开发重金属污染风险评价

在论述环境风险评价的概念、理论和方法的基础上,通过对某典型铅锌矿山重金属污染程度、重金属毒性响应系数和生态危害系数的计算与探讨,建立了铅锌矿山重金属生态风险评价指标体系.根据所建立的指标体系,计算了每个样点的生态风险指数,结果认为该矿山总体环境质量很差,重金属污染极其严重.     

Recycling-oriented characterization of plastic frames and printed circuit boards from mobile phones by electronic and chemical imaging

This study characterizes the composition of plastic frames and printed circuit boards from end-of-life mobile phones. This knowledge may help define an optimal processing strategy for using these items as potential raw materials. Correct handling of such a waste is essential for its further “sustainable” recovery, especially to maximize the extraction of base, rare and precious metals, minimizing the environmental impact of the entire process chain. A combination of electronic and chemical imaging techniques was thus examined, applied and critically evaluated in order to optimize the processing, through the identification and the topological assessment of the materials of interest and their quantitative distribution. To reach this goal, end-of-life mobile phone derived wastes have been systematically characterized adopting both “traditional” (e.g. scanning electronic microscopy combined with microanalysis and Raman spectroscopy) and innovative (e.g. hyperspectral imaging in short wave infrared field) techniques, with reference to frames and printed circuit boards. Results showed as the combination of both the approaches (i.e. traditional and classical) could dramatically improve recycling strategies set up, as well as final products recovery.