重金属对硫酸盐还原菌影响

含重金属硫酸盐废水是我国工业水污染的突出问题,利用硫酸盐还原菌的生物去除重金属的方法具有投资少、成本低、能耗少、去除率高,没有二次污染等优点而成为研究的热点。文章以混合培混养物作为接种污泥,考察不同浓度的重金属离子(Cu2+、Cd2+、Ni2+、Hg2+)对硫酸盐还原菌(Sulfate reducing bacteria,SRB)的抑制作用。研究表明:10 mg/L的Cu2+、Cd2+和20 mg/L的Hg2+对SRB还原硫酸盐的影响较小,硫酸盐最大去除率可分别达到94.1%、94.6%、91.3%,与空白(93.9%)相近;20 mg/L的Cu2+对SRB的抑制最为强烈,硫酸盐最大还原率仅为48.2%,剩余金属离子(Cd2+、Ni2+、Hg2+)都分别随着浓度的增大而对SRB的抑制作用增强;相同浓度的重金属离子对SRB的抑制顺序为Ni2+>Cu2+>Cd2+>Hg2+,抑制浓度分别为10、20、30、60 mg/L。最后阐述了各个反应器中硫酸盐还原率最大时,(WCOD/WSO42-)与硫酸盐还原率的关系。     

半球形件粘性介质压力成形的数值模拟研究

粘性压力成形技术是金属板材成形领域里新近出现的一种先进的加工工艺。对双面施放粘性介质的板材胀形进行了模拟研究 ,在双面施放介质的板材粘性介质胀形时 ,排放孔位置分布对毛坯成形过程有明显的影响。排放孔位置分布的不同造成模腔内介质的速度场不同 ,进而导致板材不同部位的流动速度的方向大小发生变化 ,最终使成形件的厚度分布不同     

Nanocatalyzed biodiesel synthesis from the oily contents of Marine brown alga Dictyota dichotoma

This research article demonstrates biodiesel synthesis through the methanolysis of the oily contents (4.02 ± 0.27% w/w on dried basis) of Dictyota dichotoma collected from the coast of Hawksbay, Pakistan. The metal oxides (CaO, MgO, ZnO, and TiO₂) used as nanocatalysts were refluxed (5% K₂SO₄), calcinated (850 °C) and characterized by Atomic Force Microscopy (AFM) which produced 93.2% w/w FAME (biodiesel) at relatively mild condition (5% catalyst, 65 °C, 3 h, 18:1 molar ratio) using CaO. Whereas, MgO, ZnO, and TiO₂ produced 92.4%, 72.5%, and 31.8% w/w FAME, respectively at elevated condition (225 °C). Thus, CaO was considered to be the best catalyst among the others. This tri-phase reaction require continuous fast mixing and the yield depends on the reaction parameters like catalyst amount, temperature, reaction time and molar ratio (methanol: oil). The reusability of these heterogeneous catalysts simplified the purification step, reduced the waste generation and make the final product technically and economically viable.     

南京大气细粒子中重金属污染特征及来源解析

利用2011年1月、4月、7月和10月在南京市区和北郊采集的气溶胶样品,研究了南京大气细粒子中zn、Ph、Hg、As和cd5种重金属的污染水平,通过元素相关性分析和因子分析方法,对细粒子中这些重金属的污染来源进行了初步解析。结果表明,南京大气细粒子及其重金属污染严重,北郊普遍比市区严重;As严重超标,cd在南京北郊超标约5倍,zn在市区与北郊的质量浓度均高于其他重金属元素。每种重金属的浓度均随季节而变化。市区细粒子中,As和zn可能主要与燃煤、轮胎灰尘和建筑扬尘等有关,Pb、Hg和cd主要来自交通尘、城市垃圾焚烧等。北郊细粒子中,As、Hg和zn主要来源于燃煤、钢铁冶炼等工业,Pb和cd主要与农作物秸秆燃烧、汽车尾气、道路扬尘等影响有关。     

Response of the Ascorbate-Peroxidase of Selenastrum capricornutum to Copper and Lead in Stormwaters

The green alga Selenastrum capricornutum expresses a uniqueascorbate peroxidase, that responds to copper and lead. Attemptswere made to test if this peroxidase could be used to monitor thelevels of copper and lead in natural waters. When S.capricornutum was exposed to a stormwater sample, the specificactivity of the peroxidase in the cell extract was commensuratewith the combined copper and lead contents in the sample. Theperoxidase responses were also correlated with the 96 hr biomasstoxicity assay of S. capricornutum. However, unlike thebiomass toxicity assay, the peroxidase activity was not affectedby the anions in the samples. The use of this peroxidase can beused as a marker for testing heavy metal toxicity in the water.     

金属丝棉结构在电焊烟尘处理中的过滤性能研究

电焊烟尘对人危害极大,必须加以净化才能排放到空气中.然而电焊作业烟尘量极大,由于过滤效率低,导致小型移动式电焊除尘器应用受到限制.为了更好地利用移动式除尘器净化电焊烟尘,研究高效过滤材料变得非常重要.通过数值模拟金属丝绵的除尘效率、过滤压力损失及残余压降等影响过滤性能的因素,将金属丝绵应用于移动式除尘器.为了更好地发挥...     

Worst-case identification of gas dispersion for gas detector mapping using dispersion modeling

To quickly and accurately quantify the material release in process units, gas detectors may be placed according to the results of gas dispersion modeling. DNV's PHAST software is one of the most useful and reliable tools for material dispersion modeling. In this software, fluid dispersion is modeled based on the process conditions, the weather conditions and the specifications of the material release point. However, varying weather conditions throughout the year and the exact determination of the release point on the plot plan and the release elevation are problematic; these issues cause the results to be non-exact and non-integrated. Choosing the most appropriate conditions is challenging. In this paper, a scheme was provided to select the most appropriate conditions for gas dispersion modeling. This scheme approaches modeling based on the worst-case scenario (the situation in which the dispersed gas reaches the detector later in comparison to the other cases). Therefore, different weather conditions, release elevations and release points on the plot plan were modeled for an absorber tower of the Gonbadli Dehydration Unit of the Khangiran Refinery. The worst case of each release condition was then chosen. Finally, gas detectors were placed using the gas dispersion modeling results based on the worst-case scenario.     

城市老工业区土壤重金属污染状况与健康风险评价

本文对西部某老工业区土壤中As、Pb、Cr、Cd、Hg、Zn的含量、空间分布状况展开了研究,并依据《污染场地风险评估技术导则》对该老工业区的健康风险进行了评价。研究结果表明,该老工业区土壤重金属污染严重,6种元素与陕西土壤背景值相比超标100%,表明其不适宜作为居住用地开发。健康风险评价结果显示,As、Pb、Cr、Cd元素的非致癌风险值分别为3.83、1.7、1.94、1.09,均超过非致癌风险可接受值1,表明该老工业区对人们存在非致癌健康风险;对于致癌风险,As、Cr、Cd元素的致癌风险值远大于致癌风险边界值,分别超过致癌风险值的2个数量级(2.64×10-4)、4个数量级(1.94×10-2)、1个数量级(6.12×10-5),表示As和Cr已经达到了显著致癌风险的水平。     

河南省武陟县大田土壤重金属形态分布及潜在生态风险评价

为了解河南省武陟县大田土壤重金属Cr、Cd、Pb、As、Cu、Se、Ni和Co的形态分布和生态风险情况,在该区域采集了12个表层土壤(0～20cm)样品,采用修正的BCR连续提取法进行形态分析,探讨其生物有效性,并采用Hakanson指数法评价了重金属的潜在生态风险.结果表明,土壤中不同重金属的形态分布差异很大,其中,Cr、As、Ni和Co均主要以残渣态存在,分别占其总量的66.6％、61.4％、50.7％和41.8％;Cu和Se主要以可氧化态存在,分别占其总量的43.8％和67.8％;Pb主要以可还原态存在,占总量的61.1％;Cd主要以酸提取态存在,占总量的53.3％.生物有效性分析表明,Cd的可利用态K1为0.933,生物有效性是最大的,对土壤生态系统的潜在危害性较大,其次是Pb和Co;Cu和Se在土壤环境发生变化时,很容易再次释放到外界环境中;Cr、As和Ni不易被外界生物利用.潜在生态风险评价结果显示,以国家土壤环境质量标准二级标准为参比值时,Cr、Cd、Pb、As、Cu和Ni的单项潜在生态风险程度均为轻微,综合潜在生态风险处于轻微等级.     

生物质炭对土壤重金属形态转化及其有效性的影响

为了解土壤重金属形态转化及其有效性对生物质炭修复措施的响应,以Cd、Cu、Pb和Zn复合污染水稻土为供试土样,添加不同粒径(1 mm和0.25 mm)和不同施用量(0、1%和5%)的竹炭(BB)、稻草炭(RSB)进行为期1年的恒温((25±1)℃)培养试验后,检测土壤p H、有效磷含量及重金属DTPA有效态含量的变化,并采用BCR连续浸提法分析生物质炭对土壤中重金属元素化学形态再分配的影响.结果表明:稻草炭的施用显著(p0.05)提高了土壤的p H值,且在RSB-5%(0.25 mm)处理下效果最显著;稻草炭的施用显著(p0.05)提高了土壤的有效磷含量,且5%用量比1%用量效果更明显;而竹炭的施用对土壤p H值和有效磷含量均无显著性影响;RSB-5%(0.25 mm)处理对降低土壤中Cd、Cu、Pb和Zn有效态含量的效果最佳,分别减少了34.5%、50.1%、52.5%和52.1%;在细粒径(0.25 mm)稻草炭处理下,酸溶态Cd和Cu向可还原态和可氧化态转化,酸溶态Zn向可还原态转化;在粗粒径(1 mm)竹炭处理下,酸溶态Cu和Zn向可还原态、可氧化态和残渣态转化;酸溶态Pb在稻草炭处理下向可还原态和可氧化态转化,且细粒径比粗粒径效果更佳;竹炭和稻草炭的施用改变了土壤中上述重金属各形态的分配,且5%用量比1%用量效果更明显.