粉尘点污染扩散模型的可视化研究

在分析和总结了瞬时点尘源在静止流体、均匀紊流和湍流条件下扩散模型的数学表达式和浓度分布方程的基础上,运用Matlab软件进行可视化处理,生成一系列的三维图形,可从不同的角度进行观察和分析,使之能够直观、形象的了解粉尘扩散过程,并从中了解到粉尘扩散的一些特点,该项研究对粉尘防治工作与危害预测都有重要的理论与实践意义。     

环境规制对城市生态技术扩散效率的影响研究

生态技术扩散是长江经济带生态文明建设的必要环节,也是企业履行环保责任的有效措施。本文以长江经济带110个地级及以上城市为研究对象,采用非径向方向距离函数对城市工业企业生态技术扩散效率进行测算,分别从整体和区域异质性角度实证分析环境规制对城市工业企业生态技术扩散效率的影响及内在机理。结果表明：长江经济带城市环境规制与生态技术扩散效率存在倒“U”形关系,环境规制对生态技术扩散效率还存在多重影响路径,外商直接投资和工业集聚在影响路径中分别起着中介作用,且外商直接投资和工业集聚的链式中介显著。在异质性分析中,发现环境规制、外商直接投资、工业集聚和生态技术扩散效率之间的关系因区域位置不同而存在差异性。为此,依据研究结论及环境规制实施现状提出相应的政策建议,实现长江经济带经济永续绿色发展目标。     

中国低碳城市试点的政策设计逻辑

政策试点是中国国家治理策略体系的重要组成部分,是中国政府遵循“由点到面”逻辑以试验手段制定政策的一种常规性工作方法。低碳城市试点是中国应对气候变化战略的重要组成部分,通过选择不同类型、不同发展阶段、不同资源禀赋的地区开展试点,探索经济增长与碳排放脱钩的模式。现有文献侧重低碳城市建设的内涵、建设模式与路径、温室气体的核算方法、政策手段、峰值研究与达峰路径、效果评估等,有力地支持了低碳城市建设决策,但对于低碳城市试点的政策设计鲜有涉及。本文从政策过程理论、央地关系两个视角,结合府际学习与竞争关系,建构了中国低碳城市政策“试点–扩散”机制与政府行为的分析框架。中国的低碳城市试点具有探索型开拓性、综合型专业性、授权型自主性的特点,结合三批低碳城市试点的文件要求和实践进展,从政策试点的选点、设计、执行、监督和评估五个方面对于中国低碳城市试点进行了系统的梳理分析。相较于经济领域的其他政策试点,低碳城市政策试点具有弱激励弱约束的政策环境。地方政府基于自身的学习能力和领导力,在政策创新方面表现出争先、自主、效仿和守成四种行为特征,并以杭州、深圳、镇江、成都四个表率城市做了实证。政策“试点-扩散”的过程从本质上讲是中国政策创新与扩散的过程,可能在现实中需要往复多次进行,中国已陆续开展的三批低碳城市试点工作就遵循这样的政策逻辑。试点的意义是试出问题、解决问题、积累经验。从前三批试点城市评估结果来看,试点城市在低碳发展目标设定、转型路径探索和低碳发展动力转换等方面与社会的预期仍有差距,为此本文提出了推进低碳城市建设的四点建议:一是激发城市低碳发展的内生动力;二是完善低碳城市试点的科学论证机制;三是建立激励与约束并举的长效机制;四是强化市场公平竞争的政策导向。     

铁磁流体对煤粒瓦斯解吸性能影响实验研究*

为探究铁磁流体对煤体瓦斯解吸性能的影响,采用水浴恒温吸附解吸系统,开展0.44,0.65,1.14 MPa 3组不同平衡压力下加铁磁流体前后的瓦斯解吸对比实验,根据Langmuir方程经验公式计算瓦斯极限解吸量和初始扩散系数,分析铁磁流体对煤体瓦斯解吸影响的机理。结果表明:在3组不同平衡压力下加入铁磁流体后瓦斯极限解吸量由2.5,10,20 mL/g降低为2.22,3.33,10 mL/g,降低11.2%,66.7%,50%;初始扩散系数由0.997 1,1.629 9,3.888 3 μm2·s降低为0.685 5,0.997 1,2.933 5 μm2·s,降低31.25%,38.82%,24.56%。在铁磁流体的作用下,煤体瓦斯解吸性能得到大幅降低。     

An Experimental Methodology for Monitoring Contaminant Transport Through Geotechnical Centrifuge Models

In this paper, an attempt has been made to highlight an experimental methodology for monitoring contaminant transport through locally available silty soil and commercially available clay in geotechnical centrifuge models, for different compaction states. Use of multiple depth sensors to determine depth distribution of sodium chloride in the soil column has been detailed. The obtained results have been compared with argentometric method. To validate the centrifuge modelling, modelling of models has been used. The test setup developed can simulate contaminant transport mechanisms through the soil mass, which is approximately 10 m deep, over a period of 600 days. R _e and P _e are found to be N times higher in the centrifuge models. These numbers are found to be several orders less than unity. This indicates that laminar flow prevails and the dominating Cl⁻ transport mechanism in centrifuge is diffusion. The study also highlights the fact that the geotechnical centrifuge modelling can be used as a viable alternative to field scale experimentation.     

Temperature Effect on Migration of Zn and Cd Through Natural Clay

To investigate the effect of temperature on effective diffusion coefficients and retardation factors for Zn and Cd, combined diffusion and sequential extraction analyses were conducted at 15 ^˚C and 55 ^˚C. The effective diffusion coefficients of the metals increased up to ten times according to the increased temperature. On the other hand, the effect of temperature on the retardation factor depended on the retention mechanisms of the metals. The distribution coefficient for Zn, which was mainly partitioned in the carbonate phase, increased up to two times with the increase in temperature. On the other hand, the distribution coefficient for Cd, which was mainly partitioned in the exchangeable phase, was hardly affected by the temperature change. Results of combined diffusion and sequential extraction analysis showed that the effect of temperature on the heavy metals’ (Zn and Cd) migration through the compacted natural clay was influenced by the combined effects of the diffusion coefficient and the retardation factor. Additionally, we could also observe the change in retention mechanism for the metals with the change in pore water concentration.     

Geographic Variability in Radon Exhalation at a Rehabilitated Uranium Mine in the Northern Territory, Australia

In this study, dry season radon flux densities and radon fluxes have been determined at the rehabilitated Nabarlek uranium mine in northern Australia using conventional charcoal canisters. Environmental background levels amounted to 31± 15 milli Becquerel per m² per second (mBq m⁻² s⁻¹). Radon flux densities within the fenced rehabilitated mine area showed large variations with a maximum of 6500 mBq m⁻² s⁻¹ at an area south of the former pit characterised by a disequilibrium between ²²⁶Ra and ²³⁸U. Radon flux densities were also high above the areas of the former pit (mean 971 mBq m⁻² s⁻¹) and waste rock dump (mean 335 mBq m⁻² s⁻¹). The lower limit for the total pre-mining radon flux from the fenced area (140 ha) was estimated to 214 kBq s⁻¹, post-mining radon flux amounted to 174 kBq s⁻¹.Our study highlights that the results of radon flux studies are vitally dependant on the selection of individual survey points. We suggest the use of a randomised system for both the selection of survey points and the placement of charcoal canisters at each survey point, to avoid over estimation of radon flux densities. It is also important to emphasize the significance of having reliable pre-mining radiological data available to assess the success of rehabilitation of a uranium mine site.2006 Springer. The Australian Government's right to retain a non-exclusive, royalty free licence in and to any copyright is acknowledged.     

Evaluation of Carbon Uptake and Emissions by Forests in Korea During the Last Thirty Years (1973–2002)

The contribution of Korean forests to carbon sequestration for anthropogenic carbon emissions was evaluated. In addition, monitoring of carbon species released from forest fires was conducted. Despite a high carbon uptake by Korean forests, a tremendous increase in fossil fuel burning resulted in a small contribution by forests to carbon removal. The removal efficiency had a 5–31% range with an average of 12% during the period 1973–2002. In 2000, the amount of carbon released from burned trees corresponded to 1.6% of carbon uptake by forests. The distribution of surface CO concentration (ppb) derived from MOPITT (Measurement of Pollution in the Troposphere) showed high CO levels over the East/Japan Sea on April 10, 2000 when the largest forest fires occurred along the east coast of Korea. Trajectory analysis and ground CO measurements also indicated that CO levels over the East/Japan Sea were influenced by forest fires. This study suggests that continuous monitoring of carbon emissions from forest fires is needed for a more reliable estimate of carbon flux in the environment.     

Distribution of radionuclides in the guano sediments of Xisha Islands, South China Sea and its implication

Several natural and anthropogenic radionuclides (²¹⁰Pb, ²²⁶Ra and ¹³⁷Cs) in guano-phosphatic coral sediments and pure guano particles collected from Ganquan, Guangjin, Jinqing and Jinyin Islands of the Xisha archipelago, South China Sea, were analyzed. The Constant Initial Concentration (CIC) model and the Constant Rate of Supply (CRS) model were applied for age calculation. The average supply rate of ²¹⁰Pb was 126 Bq m⁻² a⁻¹, very close to the flux of northern hemisphere average (125 Bq m⁻² a⁻¹). The activities of anthropogenic radionuclides in the sediments were very low, indicating that human nuclear tests did not notably impact this region. The main source of radionuclides in the sediments was from atmospheric precipitation, and the organic matter derived from plant and produced by nutrient-rich guano could further enhance them.     

Inverse modeling of Asian Rn flux using surface air Rn concentration

When used with an atmospheric transport model, the ²²²Rn flux distribution estimated in our previous study using soil transport theory caused underestimation of atmospheric ²²²Rn concentrations as compared with measurements in East Asia. In this study, we applied a Bayesian synthesis inverse method to produce revised estimates of the annual ²²²Rn flux density in Asia by using atmospheric ²²²Rn concentrations measured at seven sites in East Asia. The Bayesian synthesis inverse method requires a prior estimate of the flux distribution and its uncertainties. The atmospheric transport model MM5/HIRAT and our previous estimate of the ²²²Rn flux distribution as the prior value were used to generate new flux estimates for the eastern half of the Eurasian continent dividing into 10 regions.The ²²²Rn flux densities estimated using the Bayesian inversion technique were generally higher than the prior flux densities. The area-weighted average ²²²Rn flux density for Asia was estimated to be 33.0 mBq m⁻² s⁻¹, which is substantially higher than the prior value (16.7 mBq m⁻² s⁻¹). The estimated ²²²Rn flux densities decrease with increasing latitude as follows: Southeast Asia (36.7 mBq m⁻² s⁻¹); East Asia (28.6 mBq m⁻² s⁻¹) including China, Korean Peninsula and Japan; and Siberia (14.1 mBq m⁻² s⁻¹). Increase of the newly estimated fluxes in Southeast Asia, China, Japan, and the southern part of Eastern Siberia from the prior ones contributed most significantly to improved agreement of the model-calculated concentrations with the atmospheric measurements. The sensitivity analysis of prior flux errors and effects of locally exhaled ²²²Rn showed that the estimated fluxes in Northern and Central China, Korea, Japan, and the southern part of Eastern Siberia were robust, but that in Central Asia had a large uncertainty.