微等离子弧放电催化水处理技术的研究

采用钛为阳极的微等离子弧放电技术,研究了在模拟废水处理中放电催化效应及其机理,发现该技术对甲基橙有好的放电催化处理效果.甲基橙的脱色程度与峰值电压、脉冲频率、占空比、阳极电极面积等有关.在0.3mol·L-1的H3PO4电解液中,在峰值电压为550V、脉冲频率200Hz,占空比1∶180、阳极电极面积50mm×50mm条件下,20min内600mL、20mg·L-1的甲基橙溶液脱色率达90%.实验结果表明,该放电催化体系具有协同效果好、能效高、反应器设计要求简单等特点,是一种有发展前景的水处理新技术.     

典型工业半焦的孔隙分形结构分析

工业半焦是一种具有复杂的微观孔隙拓扑结构的多孔物质.基于分形理论,引入分形维数对工业半焦不规则孔隙结构的粗糙、复杂程度进行了定量表征和描述.选取具有典型煤种和工艺代表性的工业半焦样品,用孔隙度分析仪对其孔隙结构特征进行了测量,并利用其测量数据进行了分形维数的分析计算.计算结果表明,工业半焦的孔隙结构符合分形特征,在样品颗粒尺寸为2.36～3.35mm的测量条件下,样品的分形维数在2.7982～2.9154之间,其可决系数在0.9157～0.9614之间;样品的分形维数与煤种和半焦热解工艺过程均有一定的关系.通过对工业半焦分形维数的计算分析,可以更加全面准确地了解其孔隙结构特征,以期为分析评价其吸附和活化潜力、制定恰当的活化工艺提供更加可靠的依据.     

潮间带沉积物/大气Hg的释放的模拟研究

研究了潮间带沉积物中的Hg向大气的释放,结果表明光照造成沉积物中的Hg快速向大气释放.光照8 h后,海泊河口和黄河口沉积物释放到大气中的Hg分别占58%和51%,其释放通量总体上遵循先升高后降低的规律,前者在13:00～14:00达到最大值2 830μg/(m2·h),后者在12:00～13:00达到最大值73μg/(m2·h);海泊河口沉积物Hg的释放通量与大气温度、沉积物温度和光照强度的相关系数分别为0.83(P＜0.05)、0.98(P＜0.01)和0.73(P＜0.05),黄河口沉积物Hg的释放通量与大气温度、沉积物温度和光照强度的相关系数分别为0.73(P＜0.05)、0.80(P＜0.05)和0.81(P＜0.01),温度、光照对沉积物Hg的释放有重要的影响.     

Aerobic degradation of methyl tert-butyl ether by a Proteobacteria strain in a closed culture system

The contamination of methyl ten-butyl ether （MTBE） in underground waters has become a widely concerned problem all over the world. In this study, a novel dosed culture system with oxygen supplied by H2O2 was introduced for MTBE aerobic biodegradation. After 7 d, almost all MTBE was degraded by a pure culture, a member of β-Proteobacteria named as PMI, in a closed system with oxygen supply, while only 40% MTBE was degraded in one without oxygen supply. Dissolved oxygen （DO） levels of the broth in closed systems respectively with and without H2O2 were about 5-6 and 4 mg/L. Higher DO may improve the activity of monooxygemase, which is the key enzyme of metabolic pathway from MTBE to tert-butyl alcohol and finally to CO2, and may result in the increase of the degrading activity of PM1 cell. The purge and trap GC-MS result of the broth in closed systems showed that tea-butyl alcohol, isopronol and acetone were the main intermediate products.     

三峡消落带沉积物-大气界面汞交换通量及其影响因素

应用动力通量箱(Dynamic Flux Chamber,DFC)与高时间分辨率的RA-915+自动汞分析仪联用技术,在消落带沉积物出露期,野外现场监测沉积物-大气界面汞交换通量,同时对其影响因素进行了分析。结果表明:三峡库区消落带沉积物-大气界面汞交换通量范围为-6.80±12.35~28.17±36.17 ng/(m2·h)晴天库区消落带沉积物-大气界面汞交换通量表现出相同的变化趋势,即从早晨开始沉积物-大气界面汞的交换通量逐渐增加,到正午左右达到峰值,之后交换通量逐渐减小,但阴天这一趋势不明显。暖季白天沉积物-大气界面汞交换通量都以释放为主,冷季白天则以沉降为主。暖季晴天,沉积物-大气汞交换通量与气温、沉积物温度、光照强度呈显著正相关关系,与相对湿度呈显著负相关关系。无论晴天还是阴天,大气汞浓度都与沉积物-大气汞交换通量呈负相关关系。白天,光照强度和大气汞浓度是影响消落带沉积物/大气界面汞交换通量的主要因素,而在夜间,沉积物温度和大气汞浓度是其主要影响因素。     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

The role of sorption and bacteria in mercury partitioning and bioavailability in artificial sediments

This study compared the relative importance of three types of sorption (organic matter-particle, mercury-organic matter and mercury-particle) in controlling the overall mercury partitioning and bioavailability in sediments. We found that all three types of sorption were important for both inorganic mercury (Hg) and methylated mercury (MeHg). Mercury-particle sorption was more important than mercury-fulvic acid (FA) sorption in increasing the mercury concentrations with increasing aging. Bioavailability (quantified by gut juice extraction from sipunculans) was mainly controlled by mercury-particle sorption, while FA-particle and mercury-FA sorption were not as important, especially for MeHg. Bacterial activity also increased the partitioning of Hg or MeHg in the sediments and was further facilitated by the presence of organic matter. The bioavailability of Hg or MeHg from sediments was only slightly influenced by bacterial activity. This study highlights the importance of sorption from various sources (especially mercury-particle sorption) as well as bacteria in controlling the partitioning and bioavailability of Hg or MeHg in sediments.     

复合式吸收器采样还原一体化冷原子吸收法测定大气中的汞

目的研制一种高效率采集大气中汞的吸收器.方法利用一种集大泡式与玻砂板式吸收器为一体的复合式吸收器采样,并使采样还原一体化冷原子吸收法测定大气中汞.结果平均吸收率为96%,变异系数在4%～12%之间.结论复合式吸收器采样吸收效率高,适合于大气中微量汞的测定.     

巯基棉富集-毛细柱气相色谱法测定环境水中的甲基汞

用巯基棉富集-毛细柱气相色谱法对水中甲基汞进行测定,具有选择性强,回收率高,灵敏度高等优点。实际样品加标回收率达到85%以上,最低可检出0.6ng/L的浓度。研究结果表明,与填充柱法相比,毛细柱法对目标物的分离效果好,且不会发生柱中毒反应,避免了用氯化汞对色谱柱进行处理的步骤。论证了用甲苯代替苯做为萃取剂的可行性,证明用甲苯代替苯对测试结果没有显著影响,使用甲苯可以避免实验人员暴露于毒性较大的苯中的风险。     

Elemental Mercury Control by Novel Oxidant and Sorbent in an Entrained-Flow System

An entrained-flow system has been designed and constructed to simulate in-flight mercury capture by sorbents in ducts of coal-fired utility plants. The test conditions of 1.5 s residence time, 140°C temperature, 4.5 ppbv inlet Hg⁰ concentration, and 0–20 lb/MMacf sorbent injection rates were chosen to simulate conditions in the ducts. Novel oxidants developed in previous fixed-bed tests and novel sorbents derived from the novel oxidants were tested for their Hg⁰ capture in the entrained-flow system to examine the possibility of using those sorbents in a full-scale system. Darco-FGD and Darco Hg-LH served as benchmark sorbents with which mercury control capability of the novel oxidants and novel sorbents could be compared. The test results showed that the novel oxidants have remarkable Hg⁰ oxidation capability, and the novel sorbents showed a better performance in Hg⁰ removal than Darco Hg-LH.