压汞法测定火电厂SCR板式催化剂孔参数的研究

以压汞法测定多孔物质的孔结构及比表面积已广泛用于化学工业、催化剂、石油、陶瓷及水泥等各个领域,但国内外关于压汞法在火电厂烟气脱硝催化剂表征中的应用鲜有报道。借鉴孔结构测试的标准方法,对样品处理方法及一些试验条件进行了优化,确定了一种用压汞法表征脱硝催化剂孔参数（主要包括孔容、孔径及孔径分布）的方法。并将该方法用于某电厂运行不同时间的催化剂参数的表征,结果表明,压汞法测得的孔隙数据与催化剂活性存在相关性。此方法的应用将对电厂脱硝催化剂的表征和管理提供指导。     

磁性活性炭催化臭氧氧化降解水中甲基橙

通过浸渍法制备了钕铁硼磁性活性炭(Nd Fe B/AC),采用SEM和VSM技术对其进行了表征,并将其作为非均相催化剂用于臭氧氧化降解水中甲基橙(MO)。表征结果显示:Nd Fe B/AC具有硬磁特性;当m(Nd Fe B)∶m(AC)=1∶2时,其比饱和磁化强度和比剩余磁化强度分别为15.9 A·m2/kg和6.0 A·m2/kg,矫顽力可达104.5k A/m。实验结果表明:在Nd Fe B/AC投加量为3.0 g/L、初始溶液p H为5.0、初始MO质量浓度为20 mg/L、臭氧质量浓度为15.0 mg/L、室温的条件下反应40 min,MO降解率达93.9%,显著优于投加AC的64.4%;AC和Nd Fe B/AC催化臭氧氧化降解MO的反应过程均遵循一级动力学规律,且Nd Fe B/AC的反应速率常数为AC的近3倍。     

Effects of injection timing,injector opening pressure and nozzle geometry on the performance of cottonseed oil methyl ester-fuelled diesel engine

Increasing petroleum prices, increasing threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for engines. Evolving technology and a recurring energy crisis necessitates a continuous investigation into the search for sustainable and clean-burning renewable fuels. In this paper, cottonseed oil methyl ester (COME) was used in a four-stroke, single-cylinder variable compression ratio diesel engine. Tests were carried out to study the effects of fuel injection timing, fuel injector opening pressure (IOP) and injector nozzle geometry on the performance and combustion of COME biodiesel fuel used in a compression ignition engine with a single fuel mode. Fuel injection timing varied from 19° to 27° before top dead centre (bTDC) in incremental steps of 4° bTDC; fuel IOP varied from 210 to 240 bar in incremental steps of 10 bar. Fuel nozzle injectors with three, four and five holes, each of 0.3 mm size, were selected for the study. The results suggested that with retarded injection timing of 19° bTDC, increased IOP of 230 bar and a four-hole nozzle injector of 0.3 mm size resulted in overall better engine performance with an increased brake thermal efficiency and reduced HC, CO and smoke emission levels.     

燃煤电厂汞排放控制技术研究

近年来,燃煤电厂烟气中的汞成为继SO2、NOx和烟尘之后又一公认的大气环境污染物,我国已正式立法控制燃煤电厂汞排放,这使得燃煤电厂汞排放技术的研究迫在眉睫。不同形态汞的理化性质不同,元素态汞（ Hg0）较之氧化态汞（Hg2＋）和颗粒态汞（Hgp）更难去除,因此,脱汞的前提是提高Hg0的氧化率。介绍并简单分析了目前国内外已有的汞排放控制技术：燃烧前控制（清洁燃煤发电技术）、燃烧中控制（煤基添加剂技术和炉膛喷射技术）,和燃烧后控制（利用现有的烟气控制设备协同控制）,并对我国脱汞技术发展方向提出了展望。     

Positive vs. false detection: A comparison of analytical methods and performance for analysis of cyclic volatile methylsiloxanes (cVMS) in environmental samples from remote regions

Contamination and analytical variation can significantly hinder trace analysis of cyclic methyl volatile siloxanes (cVMS); potentially resulting in the report of false positives at concentrations approaching detection limits. To assess detection and variation associated with trace cVMS analysis in environmental matrices, a co-operative laboratory comparison for the analysis of octametylcyclotetrasiloxane (D4), decamethylcylcopentasiloxane (D5), and dodecametylcyclohexasiloxane (D6) in sediment and biota from the Svalbard Archipelago was conducted. Two definitions of detection limits were evaluated in this study; method detection limits (MDL, matrix defined) and limits of detection (LOD, solvent defined). D5 was the only cVMS detected above both LOD (0.08–0.81 ng g⁻¹ ww) and MDL (0.47–2.36 ng g⁻¹ ww) within sediment by all laboratories where concentrations ranged from 0.55 to 3.91 ng g⁻¹ ww. The percentage of positive detects for D5 decreased by 80% when MDL was defined as the detection limit. D5 was also detected at the highest frequency among all laboratories in fish liver with concentrations ranging from 0.72 to 345 ng g⁻¹ ww. Similar to sediment, percentage of positive detects for D5 decreased by 60% across all laboratories for fish livers when using MDL (0.68–3.49 ng g⁻¹ ww). Similar observations were seen with both D4 and D6, indicating that sample matrix significantly contributes to analytical response variation. Despite differences in analytical methods used between laboratories, good agreement was obtained when using MDL to define detection limits. This study shows the importance of incorporating variation introduced by sample matrices into detection limit calculations to insure data accuracy of cVMS at low concentrations.     

Investigation of metal ions binding of humic substances using fluorescence emission and synchronous‐scan spectroscopy

Abstract

The binding site interactions of IHSS humic substances, Suwannee River Humic Acid, Suwannee River Fulvic Acid, Nordic Fulvic Acid, and Aldrich Humic Acid with various metals ions and a herbicide, methyl viologen were investigated using fluorescence emission and synchronous‐scan spectroscopy. The metal ions used were, Fe(III), Cr(III), Cr(VI), Pb(II), Cu(II) and Ni(II). Stern‐Volmer constants, K_SV for these quenchers were determined at pH 4 and 8 using an ionic strength of 0.1M. For all four humic substances, and at both pH studied, Fe(III) was found to be the most efficient quencher. Quenching efficiency was found to be 3–10 times higher at pH 8. The bimolecular quenching rate constants were found to exceed the maximum considered for diffusion controlled interactions, and indicate that the fluorophore and quencher are in close physical association. Synchronous‐scan spectra were found to change with pH and provided useful information on binding site interactions between humic substances and these quenchers.     

Optimization of esterification of fatty acid rubber seed oil for methyl ester synthesis in a plug flow reactor

To date, non-food vegetable oil has been considered as the primary source for biodiesel production. Rubber seed oil has high acid value (34 mgKOH/g) and can be used for biodiesel synthesis. The purpose of this study was to investigate esterification of fatty acid, which derived from rubber seed oil, in a plug flow reactor system at high temperature and low methanol consumption. Response surface methodology was applied for design experiment and optimization of esterification reaction. Temperature, methanol consumption, and sulfuric acid were chosen as variables to examine their influence in a conversion to methyl ester. At 140°C, at 5:1 methanol to fatty acid ratio (by mole), H₂SO₄ 1.5 (%v/w), and space time 20 min, the conversion to methyl ester attained 98.2%. Fourier transform infrared spectroscopy (FTIR) and gas chromatography-Mass spectrometry (GC-MS) were used for analysis and to confirm the formation of methyl ester. Methyl ester was characterized for biodiesel fuel properties in accordance to ASTM standard.     

Removal of mixed pesticides from drinking water system by photodegradation using suspended and immobilized TiO2

Lindane (1α, 2α, 3β, 4α, 5α, 6β-hexachloro cyclohexane), methyl parathion (O,O-dimethyl-O-4-nitrophenyl phosphorothioate) and dichlorvos (2,2-dichlorovinyl-O-O-dimethyl phosphate) are removed from water individually and as a mixture by photo degradation using suspended and immobilized forms of TiO₂ (Degussa P-25). Studies were conducted to optimize the coating thickness of immobilized photo catalyst. The rate of degradation of pesticides was compared in both suspended and immobilized TiO₂ systems. Degradation studies of mixed pesticides were carried out with low concentrations (1.0 and 2.5 mg/L) of pesticides. Only three intermediate byproducts such as methyl paraoxon, O,O,O-trimethyl phosphonic thionate and p-nitrophenol were observed during the methyl parathion degradation in suspended, immobilized TiO₂ systems and mixed pesticides degradation studies. At the end of the reaction methyl parathion and its by-products were completely degraded. During lindane degradation hexachloro cyclohexane, pentachloro cyclohexane, hexachloro benzene, 1-hydroxy 2,3,4,5,6-chlorocyclohexane, 1-hydroxy 2,3,4,5,6-chlorobenzene, pentachloro cyclopentadiene, 1,2,3,4,5-hydroxy cyclopentene and 1,2,3-hydroxy cyclobutane were identified in suspended and immobilized TiO₂ systems, whereas only hexachloro cyclohexane, pentachloro cyclohexane, hexachloro benzene and pentachloro cyclopentadiene were observed during mixed pesticides degradation. No intermediate by-product was observed during the photo degradation of dichlorvos. Langmuir-Hinshelwood pseudo first order kinetic equation showed that there was not much change in the rates of degradation in both suspended and immobilized TiO₂ systems irrespective of the pesticide. During mixed pesticides degradation, the degradation pattern was not similar to that of single pesticide.     

Persistence of metsulfuron‐methyl in two soils

Abstract

The persistence of metsulfuron‐methyl in sandy loam and clay soil incubated at different temperatures and moistures contents was investigated under laboratory conditions using longbean (Vigna sesquipedalis L.) as bioassay species. A significant degradation of metsulfuron‐methyl was observed in non‐autoclaved soil rather than the autoclaved soil sample. At higher temperature, the degradation rate in non‐autoclaved soil improved with increasing soil moisture content. In non‐autoclaved sandy loam and clay soil, the half‐life was reduced from 9.0 to 5.7 and from 11.2 to 4.6 days, respectively when moisture level of sandy loam increased from 20 to 80% field capacity at 35°C. In the autoclaved soil, herbicide residue seems to have been broken down by non‐biological process. The rate of dissipation was slightly increased after the second application of the herbicide to non‐autoclaved soils but not in autoclaved soil, indicating the importance of microorganisms in the breakdown process.     

Pesticide decontamination from fabric by laundering and simulated weathering1

Abstract

This laboratory study investigated the effectiveness of selected detergents and the phenomenon of simulated environmental conditions (weathering) on the removal of a commercial‐grade mixture of parathion and methyl parathion from a three‐layer laminated fabric. The weathering treatment consisted of exposure and non‐exposure to simulated environmental conditions of heat, light, and humidity. Contaminated fabric samples were laundered in one of three detergents containing an anionic, a nonionic, and a combined anionic and nonionic surfactant. The test fabric, a three‐layer fabric containing an impermeable microporous film laminated between two layers of nylon, was pipette‐contaminated with 400 microliters of field strength pesticide solution and allowed to dry. Half of the contaminated samples were weathered in an Atlas Fade‐Ometer. All of the contaminated samples were subsequently laundered in a Launder‐Ometer. Percent of pesticide residue was determined by gas chromatography. Weathering did significantly reduce both parathion and methyl parathion residues remaining in the test fabric. No statistically significant difference was found among the three detergents. High amounts of both parathion and methyl parathion remained in the test fabric after weathering and laundry treatments. Before the test fabric can be recommended for use in protective garments further research is needed to develop more effective decontamination procedures.