Engineered nanomaterials in rivers--exposure scenarios for Switzerland at high spatial and temporal resolution

Probabilistic material flow analysis and graph theory were combined to calculate predicted environmental concentrations (PECs) of engineered nanomaterials (ENMs) in Swiss rivers: 543 river sections were used to assess the geographical variability of nano-TiO₂, nano-ZnO and nano-Ag, and flow measurements over a 20-year period at 21 locations served to evaluate temporal variation. A conservative scenario assuming no ENM removal and an optimistic scenario covering complete ENM transformation/deposition were considered. ENM concentrations varied by a factor 5 due to uncertain ENM emissions (15%-85% quantiles of ENM emissions) and up to a factor of 10 due to temporal river flow variations (15%-85% quantiles of flow). The results indicate highly variable local PECs and a location- and time-dependent risk evaluation. Nano-TiO₂ median PECs ranged from 11 to 1′623 ng L⁻¹ (conservative scenario) and from 2 to 1′618 ng L⁻¹ (optimistic scenario). The equivalent values for nano-ZnO and nano-Ag were by factors of 14 and 240 smaller.     

Innovative applications of subgrade biogeochemical reactors: Three case studies

Subgrade biogeochemical reactors (SBGRs) are an in situ remediation technology shown to be effective in treating contaminant source areas and groundwater hot spots, while being sustainable and economical. This technology has been applied for over a decade to treat chlorinated volatile organic compound source areas where groundwater is shallow (e.g., less than approximately 30 feet below ground surface [ft bgs]). However, this article provides three case studies describing innovative SBGR configurations recently developed and tested that are outside of this norm, which enable use of this technology under more challenging site conditions or for treatment of alternative contaminant classes. The first SBGR case study addresses a site with groundwater deeper than 30 ft bgs and limited space for construction, where an SBGR column configuration reduced the maximum trichloroethene (TCE) groundwater concentration from 9,900 micrograms per liter (μg/L) to <1 μg/L (nondetect) within approximately 15 months. The second SBGR is a recirculating trench configuration that is supporting remediation of a 5.7‐acre TCE plume, which has significant surface footprint constraints due to the presence of endangered species habitat. The third SBGR was constructed with a new amendment mixture and reduced groundwater contaminant concentrations in a petroleum hydrocarbon source area by over 97% within approximately 1 year. Additionally, a summary is provided for new SBGR configurations that are planned for treatment of additional classes of contaminants (e.g., hexavalent chromium, 1,4‐dioxane, dissolved explosives constituents, etc.). A discussion is also provided describing research being conducted to further understand and optimize treatment mechanisms within SBGRs, including a recently developed sampling approach called the aquifer matrix probe.     

我国长江流域中三角区域大气污染物排放特征研究

中三角区域已经是我国第四个国家级城市群,也将成为我国经济增长的"第四极"。在经济发展的同时,更需要以节能减排、资源环境等为重点,以实现经济建设与生态文明"双可持续"的协同发展。本文以二氧化硫、氮氧化物、烟(粉)尘为主要大气污染物,对我国中三角区域大气污染物排放进行了详细的分析,并与京津冀、长三角、珠三角、"三区十群"等进行了多方位比较。结果表明,2013年中三角区域二氧化硫排放量为151.7万t,其中工业二氧化硫排放量为140.1万t;氮氧化物排放量为147.2万t,其中工业氮氧化物排放量为93.6万t;烟(粉)尘排放量为81.8万t,其中工业烟(粉)尘排放量为71.4万t。中三角区域二氧化硫、氮氧化物、烟(粉)尘排放量均位于"四极"的第三。中三角区域二氧化硫、氮氧化物、烟(粉)尘单位GDP排放强度分别为25.03t/亿元、24.29 t/亿元、13.50 t/亿元,分别位于"四极"的第一、第二、第二。同时,本文还从经济发展模式、产业结构调整、煤炭消费方式等方面对我国中三角等经济"四极"提出了相关建议。     

Seven thousand years in the service of humanity—the history of copper, the red metal

Measured by weight, copper is the third most important metal used by man. The annual value of its 2007 output was on a par with the GDP of e.g. Ukraine. Copper is also one of the oldest metals, its employment going back 7000 years. For millennia, it was predominantly employed for decorative purposes, coinage and in warfare. Technical breakthroughs in antiquity, like smelting and alloying, expanded its production and enhanced its utility. Copper's true heyday occurred after 1850, with the usage of electricity. In the period since then, volumes increased 300-fold, while costs and prices declined. With impressive progress in the technology of its production and consumption, the red metal has been able to hold its own, despite the emergence over history of formidable substitutes like iron, aluminum, plastics and optic fiber.     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

我国城乡环保一体化的制度建构:理念、原则与路径

近年来,我国"城市环境趋向好转,农村环境不断恶化"这种城乡环境二元趋势的凸现,提出了城乡环保一体化的客观要求."城市中心主义"环境法制以及我国农民实质自由的严重匮乏是我国产生城乡环境二元趋势的根本原因.一些地方所采取的仅仅局限于环保领域的城乡环保一体化措施,并不能从根本上扭转城乡环境二元趋势.城乡环保一体化实践需要以更为全面的制度建构为基础.城乡环保一体化的制度建构应树立理性、人本、自由等基本理念,应坚持整体推进、科学建构、多元参与等基本原则.城乡环保一体化的制度建构路径,首先是消除对农民的各种制度性歧视,实现城乡居民的权利平等;其次,在推动地方民主与法治建设,推进司法体制改革、建立司法审查制度的基础上,健全与完善农民权利实现的保障机制,保证农民的各项权利最终成为"可实际行使"的权利.最后,还要建立适应农村环境保护要求的环境法制.     

江苏省沿江开发区空间分工、制造业集聚与转移

基于新经济地理学相关理论,针对江苏省沿江开发战略实施以后,制造业空间可能存在的变动,在整理和分析调查问卷资料的基础上,选择专业化指数和基尼系数2种方法来定量分析江苏省21个沿江省级以上开发区空间分工、制造业集聚和转移态势。结果表明：（1）2002~2006年江南沿江开发区通过向江北沿江开发区转移部分传统产业,逐渐形成了江南沿江技术/资本密集型制造业“中心”和江北沿江劳动密集型制造业“外围”的空间分工格局;（2）江南沿江开发区内部、江北沿江开发区内部尚未形成良好的分工关系;（3）受开发区发展阶段、区域产业政策、本地化资源供给和市场需求等因素影响,并未发现理论预期的普遍存在的产业集聚现象,仅纺织服装、石化、电力、塑料橡胶等产业呈现集中趋势.     

长江口及其邻近海域表层沉积物分布特征

根据长江口和杭州湾北部沉积物粒度分析数据,研究表层沉积物类型、分布以及分区特征。结果表明：沉积物的分布特征受水动力条件、地貌类型以及泥沙来源等因素的综合影响,长江口表层沉积物在纵向分布上,自西向东粒径从粗到细、分选程度从好至差,在横向上自北港－北槽－南槽,沉积物粒度逐渐变细;水流动力作用强的河槽和波浪作用强的口门浅滩沉积物粒度较粗,水动力较弱的河口边滩及口外海滨区沉积物则较细。根据沉积物分布特征可将长江口及其邻近海域分为河口分汊河段沉积区、河口拦门沙沉积区、口外海滨沉积区和杭州湾北部沉积区等4个沉积区。     

提高高校档案利用的新途径

针对目前高校档案利用率不高的实际情况,为有效地提高档案利用率,充分发挥高校档案在高校发展建设、科学管理、提升教育教学水平中的作用,笔者通过多年的探索实践,提出了加大宣传力度、搞好基础建设、提高人员素质、拓展服务方式、创新服务内容等高校档案利用的新途径,与从事高校档案工作的广大同仁商榷。     

Kinetics of carbon dioxide absorption into mixed aqueous solutions of MDEA and MEA using a laminar jet apparatus and a numerically solved 2D absorption rate/kinetics model

New comprehensive numerically solved 1D and 2D absorption rate/kinetics models have been developed, for the first time, to interpret the experimental kinetic data obtained with a laminar jet apparatus for the absorption of carbon dioxide (CO₂) in CO₂ loaded mixed solutions of mixed amine system of methyldiethanolamine (MDEA) and monoethanolamine (MEA). Three MDEA/MEA weight ratios ranging from 27/03 to 23/07, over a concentration range of 2.316–1.996 kmol/m³ for MDEA and of 0.490–1.147 kmol/m³ for MEA were studied. The models take into account the coupling between chemical equilibrium, mass transfer, and the chemical kinetics of all possible chemical reactions involved in the CO₂ reaction with MDEA/MEA solvent. The partial differential equations of the 1D model were solved by two numerical techniques; the finite difference method (FDM) based on in-house coded Barakat–Clark scheme and the finite element method (FEM) based on COMSOL software. The FEM comprehensive model was then used to solve the set of partial differential equations in the 2D cylindrical coordinate system setting. Both FDM and FEM produced very accurate results for both the 1D and 2D models, which were much better than our previously published simplified model. The reaction rate constant obtained for MEA blended into MDEA at 298–333 K was k_MEA = 5.127 × 10⁸ exp(−3373.8/T). In addition, the 2D model, for the first time, has provided the concentration profiles of all the species in both the radial and axial directions of the laminar jet, thereby enabling an understanding of the correct sequence in which the reaction steps involved in the reactive absorption of CO₂ in aqueous mixed amines occur.