重金属Cr(VI)、Pb及Cu胁迫对双齿围沙蚕体腔细胞的DNA损伤

为探讨重金属Cr(VI)、Pb以及Cu对沙蚕体腔细胞DNA的毒性效应,以双齿围沙蚕为受试动物,重金属按不同剂量水平,Cr(VI):10、100和200 mg·L~(-1),Pb:5、50和100 mg·L~(-1),Cu:1、10和20 mg·L~(-1),分别胁迫沙蚕24 h,以不加任何重金属离子的海水为对照,采用单细胞凝胶电泳技术,检测其体腔细胞DNA损伤程度。结果表明,与空白对照组相比,3种重金属离子的各浓度组都能引起沙蚕体腔细胞DNA损伤,且3种重金属胁迫浓度与细胞DNA损伤程度之间存在显著的剂量-效应关系。双齿围沙蚕可以作为单细胞凝胶电泳的实验材料用于重金属所致环境污染的生物监测指示生物。     

禾草灵对水稻生长和典型土壤酶活性的影响

禾草灵是一种广泛使用的除草剂,在土壤中大量残留,对非靶标生物产生危害。为探究除草剂对环境生物的毒性作用,本研究模拟水稻自然生长的环境,评估禾草灵对水稻及土壤微生物的影响。研究结果表明,低浓度禾草灵(200 μg L^-1)处理4 d对土壤微生物量没有显著影响(P>0.05);8 d时,水稻生长没有明显变化,但土壤微生物量较对照组显著升高(P<0.05)。高浓度禾草灵(1 000 μg L^-1)处理4天后,土壤脲酶、酸性磷酸酶和过氧化氢酶的活性显著下降(P<0.05),下降幅度分别为8.9%,16.6%和10.2%;处理8 d后,水稻幼苗鲜重显著降低(P>0.05),叶绿素a和叶绿素b含量分别下降了13.5%和13.3%。本研究证实高浓度的禾草灵残留会对植物和土壤微生物产生不良的影响。     

三氯卡班可以影响肾小管上皮细胞的屏障功能

三氯卡班(TCC)是一种被广泛应用于个人护理用品中的广谱型亲脂性杀菌剂,已在多种环境介质和生物体中检出。因其潜在的环境蓄积、生物累积和生物毒性效应,日益受到学者们的关注。借助TCC对NRK-52E(大鼠肾小管上皮细胞)的毒性暴露实验,通过检测细胞活力、以及与跨膜电阻和紧密连接相关的连接黏附分子1(JAM~(-1),junctional adhesion molecule 1)的蛋白表达水平,研究了TCC潜在的肾脏毒性效应。结果显示,10μmol·L~(-1)TCC处理48 h时培养细胞呈现不规则的集落;10μmol·L~(-1)和20μmol·L~(-1)TCC处理NRK-52E 24 h、48 h和72 h后可以显著抑制细胞生长;3.57μmol·L~(-1)TCC(生长抑制的48 hIC20)处理NRK-52E 48 h可以显著抑制细胞间紧密连接蛋白JAM~(-1)的表达量,并降低跨膜电阻,影响肾脏的屏障功能。本研究的结果能够为进一步揭示TCC对动物的毒害机制、评估其对动物的健康风险提供数据支持。     

3种典型微生物农药对家蚕的毒性研究

苏云金芽孢杆菌、球孢白僵菌以及棉铃虫核型多角体病毒是细菌类、真菌类和病毒类微生物农药的典型代表。为了明确微生物农药对家蚕的毒性影响,选取以上3种典型微生物农药,分别探究其对家蚕的毒性。结果显示:苏云金杆菌原药对家蚕LC50值为1.33×105CFU·m L-1;球孢白僵菌原药对家蚕LC50值为1.14×106CFU·m L-1;棉铃虫核型多角体病毒母药对家蚕LC50值大于1.00×108PIB·m L-1。与此同时,通过进一步试验,明确了以上3种微生物农药对家蚕结茧率、死笼率、全茧量、茧层量等关键指标的影响。结果显示:除了棉铃虫核型多角体病毒母药,高浓度苏云金杆菌原药、球孢白僵菌原药对家蚕的结茧率和死笼率均具有显著影响;3种微生物农药对家蚕产茧能力指标全茧量、茧层量以及蛹重均无显著性影响。     

3种镉超富集植物毛状根体系对镉胁迫响应的比较

近年来,转基因毛状根组织被越来越多地应用于重金属和有机污染物的植物修复技术研究中,已成为进行污染物毒性响应机制研究的便捷的实验室工具。为了探究龙葵、油菜、芥菜3种镉(cadmium,Cd)超富集植物对Cd毒性胁迫响应的差异,以诱导出的3种植物毛状根为研究材料,从毛状根的生长状态、富集Cd的能力、根组织细胞的凋亡程度和抗氧化酶活性等方面进行了探讨。结果表明:Cd浓度为0~50μmol·L-1时,龙葵、油菜、芥菜毛状根受Cd毒害的影响都不明显;Cd浓度为75~100μmol·L-1时,龙葵、油菜、芥菜毛状根均表现出对Cd胁迫的防御响应。在较高的Cd浓度(100μmol·L-1)下,龙葵毛状根的生物量受Cd毒害的影响最小,芥菜次之,油菜受影响最大;同时龙葵毛状根富集的Cd含量最高(745.0μg·g-1),芥菜次之(681.4μg·g-1),油菜最差(505.2μg·g-1)。龙葵、油菜、芥菜毛状根在Cd胁迫下的细胞凋亡水平均随Cd浓度的升高而升高,当Cd浓度为100μmol·L-1时,龙葵毛状根比油菜和芥菜毛状根的细胞凋亡程度均低。同时3种植物毛状根在不同浓度Cd处理下抗氧化酶活性的变化有一定差异。从上述结果综合来看,龙葵毛状根受Cd毒害的影响最小、富集Cd的能力最好,是进一步开展Cd超富集植物转基因改造研究的较好的实验室载体。     

重金属Cr(Ⅵ)、Pb及Cu胁迫对双齿围沙蚕体腔细胞的DNA损伤

为探讨重金属Cr(Ⅵ)、Pb以及Cu对沙蚕体腔细胞DNA的毒性效应,以双齿围沙蚕为受试动物,重金属按不同剂量水平,Cr(Ⅵ):10、100和200 mg· L-1,Pb:5、50和100 mg·L-1,Cu:1、10和20 mg· L-1,分别胁迫沙蚕24 h,以不加任何重金属离子的海水为对照,采用单细胞凝胶电泳技术,检测其体腔细胞DNA损伤程度.结果表明,与空白对照组相比,3种重金属离子的各浓度组都能引起沙蚕体腔细胞DNA损伤,且3种重金属胁迫浓度与细胞DNA损伤程度之间存在显著的剂量-效应关系.双齿围沙蚕可以作为单细胞凝胶电泳的实验材料用于重金属所致环境污染的生物监测指示生物.     

The impact of pesticides on oxidative stress level in human organism and their activity as an endocrine disruptor

Pesticides cause serious environmental and health problems both to humans and animals. The aim of this review is to discuss selected herbicides and fungicides regarding their mode of action and their influence on basic oxidative stress parameters and endocrine disruption properties tested in selected cell cultures in vitro. Because of numerous difficulties which animal studies are subject to, cell cultures are an excellent experimental model reflecting human exposure to different pesticides through all relevant routes. This experimental model can be used to monitor aggregate and cumulative pesticide exposures.     

Microbial fuel cells: Advances in electrode modifications for improvement of system performance

There is an increasing trend to conduct the researches related to Microbial Fuel Cells (MFCs) in the recent years. Limited power output has been the major obstacle for the practical application and upscaling of MFCs. Attempts have been made on electrode modifications such as anode treatments, cathode modifications with catalysts and bio cathodes developments to produce varying degrees of improved output current depending upon the types of modifications. Power density and Coulombic efficiency have been considered as the important parameters to analyze the system performances. This paper overviews on the advances made in MFCs’ researches focusing on different types of electrodes modifications along with the involved methodology. Furthermore, the system performances of different modified MFCs are compared in terms of the power density and the Coulombic efficiency.     

Improving photostability and efficiency of polymeric luminescent solar concentrators by PMMA/MgO nanohybrid coatings

MgO nanocrystals were synthesized and doped with different concentrations in poly(methylmethacrylate) (PMMA) to prepare hybrid organic-inorganic coatings based on polymer nanohybrid thin films. The nanoparticles were found to be spherical with 62 nm diameter as determined by X-ray diffraction (XRD) and atomic force microscope (AFM). The coatings were characterized by spectroscopic tools such as optical absorption, transmission and fluorescence spectroscopy. The prepared nanohybrid films were spin-coated on cost-effective luminescent PMMA substrates doped with highly efficient luminescent dyes luminescent solar concentrators (LSCs). The outdoor photostability tests demonstrated enhanced protection against UVA radiation for coated LSCs compared to bare LSC substrates. The current–voltage characteristics of commercially produced LSC prototypes showed that the poor UV response of monocrystalline silicon solar cell can be improved by for LSCs coated by PMMA/MgO nanohybrid films which act as luminescent down shifting layer (LDSL).     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.