非金属管道微小泄漏动力学数值模拟和试验对比

为了探索非金属输送管道泄漏规律,从数值模拟和试验两个角度,对液体PE管道发生泄漏前后管道内流体与泄漏口的流动状态进行了对比分析,为判定管道泄漏提供了依据。运用FLUENT软件针对PE液体管道泄漏,在不同孔径、不同压力下,构建管道泄漏模型分别进行仿真,分析不同泄漏情景下压力梯度的分布规律。同时在近似相同条件下进行PE管道两点泄漏模拟试验。结果显示:数值模拟与试验结果基本一致,泄漏孔处压力、流速均与管内初始压力成正相关;初始压力和孔径的增大,会导致管内压力下降速度上升,但最终会趋于稳定值。     

Monitoring Biofilm Thickness Using A Non-Destructive, On-Line, Electrical Capacitance Technique

Abstact The present study was designed to evaluate indirect, non-invasive, on-line measurement of biofilm thickness using an electrical capacitance technique. Several assays were carried out and the results showed that, at a frequency of 1 kHz, electrical capacitance could be used to measure biofilm thickness indirectly (with a correlation coefficient of 0.9495). The reproducibility revealed by the assays was also highly satisfactory.However, in contrast to what was expected, there was an inverse relationship between electrical capacitance and biofilm thickness, i.e. electrical capacitance diminished with the increase in the biofilm thickness.The tests were also carried out at different frequencies (1 kHz, 10 kHz and 100 kHz)     

Validation of a booted finite element model of the WIAMan ATD lower limb in component and whole-body vertical loading impacts with an assessment of the boot influence model on response

Objective: A novel anthropomorphic test device (ATD) representative of the 50th percentile male soldier is being developed to predict injuries to a vehicle occupant during an underbody blast (UBB). The main objective of this study was to develop and validate a finite element (FE) model of the ATD lower limb outfitted with a military combat boot and to insert the validated lower limb into a model of the full ATD and simulate vertical loading experiments.

Methods: A Belleville desert combat boot model was assigned contacts and material properties based on previous experiments. The boot model was fit to a previously developed model of the barefoot ATD. Validation was performed through 6 matched pair component tests conducted on the Vertically Accelerated Loads Transfer System (VALTS). The load transfer capabilities of the FE model were assessed along with the force-mitigating properties of the boot. The booted lower limb subassembly was then incorporated into a whole-body model of the ATD. Two whole-body VALTS experiments were simulated to evaluate lower limb performance in the whole body.

Results: The lower limb model accurately predicted axial loads measured at heel, tibia, and knee load cells during matched pair component tests. Forces in booted simulations were compared to unbooted simulations and an amount of mitigation similar to that of experiments was observed. In a whole-body loading environment, the model kinematics match those recorded in experiments. The shape and magnitude of experimental force–time curves were accurately predicted by the model. Correlation between the experiments and simulations was backed up by high objective rating scores for all experiments.

Conclusion: The booted lower limb model is accurate in its ability to articulate and transfer loads similar to the physical dummy in simulated underbody loading experiments. The performance of the model leads to the recommendation to use it appropriately as an alternative to costly ATD experiments.     

电磁阀贮存寿命加速试验技术研究

首先陈述了贮存寿命加速试验的基本原理,介绍电磁阀的结构组成,分析了失效模式和失效机理后,采取恒定应力加速试验方法,然后运用极大似然估计和最小二乘法对数据进行处理,最后得出其贮存寿命等结论。     

多输入多输出(MIMO)振动试验技术

多输入多输出(MIMO)振动试验由于可以更好的模拟产品的真实工作环境,是振动试验的一个发展方向。本文分析了其产生需求的根本原因,同时介绍了国内外的发展现状及其应用情况,之后对MIMO试验系统进行了分类,介绍了试验控制器和控制方法,并探讨了其工程实施所存在困难。最后针对我国MIMO试验技术的发展提出了建议,并对前景进行了展望。     

能源利用中烃类气体检测技术研究进展

烃类气体作为地表油气地球化学勘查地下油气藏的直接指标,以及钻井液检测中指导钻井作业的重要因素,在挥发性烃类污染控制中也发挥着重要作用。通过对各类烃类气体检测技术现状和应用情况进行分析与整理,为该类技术针对不同目标的选择与组合提供了依据。     

混合集成电路HALT和HASS技术应用研究

介绍了HALT和HASS技术的概念和内涵,探讨了混合集成电路HALT和HASS技术应用的基本原理以及具体的应用方法和流程。     

优化的甘蔗皮渣吸附居室甲醛

为了研究优化后的甘蔗皮渣吸附居室中的甲醛,本研究通过3种方法处理材料进行吸附甲醛对比,得出简便高效的碱热烫处理,并针对其热烫时间(X1)、pH值(X2)、水浴锅温度(X3)和水浴时间(X4)设置正交实验,得出热烫时间30 min、pH=11、水浴锅温度80℃、水浴时间2.5 h,甘蔗皮渣对甲醛吸附率可达27.91%。通过与活性炭、硅藻纯吸附效果比较,经F检验得出优化处理甘蔗皮渣与硅藻纯吸附效果相当,均极显著优于活性炭。电镜观测出优化甘蔗皮渣与活性炭、硅藻纯同具粗糙、皱褶、疏松多孔结构;傅里叶红外光谱分析出C≡C等基团在甲醛吸附中起主要作用。     

两种不同的恒载升温方式下的钢材破坏机理分析

通过对我国建筑结构用钢在拉伸和压缩两种方式下的恒载升温试验,进行了5次受拉试件和2次受压试件的对比研究,根据试验中材料的各自变形规律,对其破坏机理进行了理论分析;从材料屈服的定义出发,给出了恒载升温拉伸试验中的参数(对应温度下的临界荷载水平),并与恒载升温压缩试验中的参数项进行了对比,指出受压构件和受拉构件的高温屈服强度是不同的,因此在钢结构建筑的耐火设计中应分别取不同的安全系数。     

直埋式光纤传感钻孔注浆耦合材料配合比试验研究

采用钻孔埋设传感光纤是岩土体分布式光纤传感直埋技术的一种,为使传感光纤与周围土体变形协调,通常在钻孔内注浆,使传感光纤与周围岩土介质凝固为一体。根据对浆液凝固时间无特定要求和有特定要求的2种情况,通过试验研究了钻孔注浆耦合材料、配合比及其凝固后强度。结果表明:通过调整水泥与膨润土的比例以及水固比可以控制凝固体的无侧限抗压强度,使其强度与原位岩土体的近似相同;添加适量的水玻璃可以加快浆液的凝固速度。针对石家庄某隧道原位土体的力学参数,得到了满足现场施工要求的最优配合比,使浆液凝固后的力学指标与原位土体的近似相同。