ELECTROPHORETIC WATER CLARIFICATION TECHNIQUES1

Only very recently has a limited amount of attention been focused directly on electrophoresis as a method for improving water quality. This approach has been proposed primarily as a method for removal of suspended colloidal material, although solutes can also be removed by this method. Very simply electrophoresis is defined as the movement of charged suspended particles in a dc electric field. Several electrophoretic clarification systems and techniques have been developed and evaluated primarily for removing colloidal clay from suspension. The methods should apply equally well to any negatively charged particulate matter. Design for optimal clay removal efficiency and operating cost efficiency has been based upon previous theoretical results and upon modification of the combination filter-el ectrophores is model of Bier. These systems and techniques along with the theoretical developments leading to their design are discussed. Results and conclusions are given for tests that have been concluded concerning the feasibility or practicality of these electrophoretic clarification systems for commercial use. These are viewed in light of various limiting factors such as electrical conductivity of the medium, quality of water desired, colloid concentrations and electrophoretic mobility of the suspended materials.     

三峡库区重庆段鲶鱼和鲤鱼体内持久性有机污染物分析

为了了解三峡库区重庆段水体中持久性有机污染物的生物富集情况,对该水体部分鱼类样品进行了分析。分析结果显示三峡库区重庆段水体中的部分持久性有机污染物已经在鲶鱼和鲤鱼体内形成富集,其检出浓度较之水体中对应浓度要高出2~4个数量级。     

我国废气污染物防治技术发展概述

本文介绍了目前我国的废气污染物种类及防治技术装备水平；分析了国内废气污染物防治技术的发展情况。     

DESK TOP METHODOLOGY FOR MODELING BIOCHEMICAL OXYGEN DEMAND IN STREAMS1

: The modeling of dissolved oxygen in streams is a widely used technique, upon which a great deal of money has been spent. This paper concludes that the standard methods of DO modeling by computer are unnecessarily complex, and that for some purposes, they can be replaced without loss of accuracy by desk top BOD models. Taking as an example, a set of data used in DO modeling, it is shown (a) that the data are grossly inconsistent, (b) that simultaneous gathering of data introduces errors in streams of long travel time, (c) that much more data as to pollutant concentrations should have been obtained, and (d) that 24-hour DO data could have been dispensed with.     

Insights into multisource sludge distributed in the Yangtze River basin, China: Characteristics, correlation, treatment and disposal

Sludge is the by-product of wastewater treatment process. Multisource sludge can be defined as sludge from different sources. Based on the sludge properties of five typical cities in the Yangtze River basin, including Jiujiang, Wuhu, Lu'an, Zhenjiang and Wuhan, this study investigated and summarized the characteristic variations and distribution differences of multiple indicators and substances from municipal sludge, dredged sludge, and river and lake sediments. The results demonstrated pH of multisource sludge was relatively stable in the neutral range. Organic matter and water content among municipal sludge were high and varied considerably between different wastewater treatment plants. Dredged sludge had an obviously higher sand content and wider particle distribution, which could be considered for graded utilization depending on its size. The nutrients composition of river and lake sediments was usually stable and special, with lower nitrogen and phosphorus content but higher potassium levels. The sources of heavy metals and persistent organic pollutants in multisource sludge were correlated, generally much higher among municipal sludge than dredged sludge and river and lake sediments, which were the most important limitation for final land utilization. Despite various properties of multisource sludge, the final fate and destination have some overall similarities, which need to be supplemented and improved by standards and laws. The study provided a preliminary analysis of suitable technical routes for municipal sludge, dredged sludge, river and lake sediments based on their different characteristics respectively, which was of great significance for multisource sludge co-treatment and disposal in the future of China.     

Carbonate-induced enhancement of phenols degradation in CuS/peroxymonosulfate system: A clear correlation between this enhancement and electronic effects of phenols substituents

This study investigated the enhancement effects of dissolved carbonates on the peroxymonosulfate-based advanced oxidation process with CuS as a catalyst. It was found that the added CO₃²⁻ increased both the catalytic activity and the stability of the catalyst. Under optimized reaction conditions in the presence of CO₃²⁻, the degradation removal of 4-methylphenol (4-MP) within 2 min reached 100%, and this was maintained in consecutive multi-cycle experiments. The degradation rate constant of 4-MP was 2.159 min⁻¹, being 685% greater than that in the absence of CO₃²⁻ (0.315 min⁻¹). The comparison of dominated active species and 4-MP degradation pathways in both CO₃²⁻-free and CO₃²⁻-containing systems suggested that more CO₃•⁻/¹O₂ was produced in the case of CO₃²⁻deducing an electron transfer medium, which tending to react with electron-rich moieties. Meanwhile, Characterization by X-ray photoelectron spectroscopic and cyclic voltammetry measurement verified CO₃²⁻ enabled the effective reduction of Cu²⁺ to Cu⁺. By investigating the degradation of 11 phenolics with different substituents, the dependence of degradation kinetic rate constant of the phenolics on their chemical structures indicated that there was a good linear relationship between the Hammett constants σ_p of the aromatic phenolics and the logarithm of k in the CO₃²⁻-containing system. This work provides a new strategy for efficient removal of electron-rich moieties under the driving of carbonate being widely present in actual water bodies.     

磁微球负载硝基锌卟啉光催化剂的制备及催化性能研究

以氯化血红素为原料,制备了磁负载的硝基锌卟啉光催化剂.同时,利用热重分析仪(TG)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)和振动磁强计(VSM)对催化剂进行了表征,发现制备的催化剂负载率为32.06%,催化剂为粒径均一的球形壳-核结构,具有良好的磁性.其次,研究了催化剂的催化降解性能.结果表明,磁负载硝基锌卟啉光催化剂在可见光下,对水中的双酚A(BPA)、对硝基苯酚(PNP)等均有90%以上的去除率;对于活性红染料废水的降解也取得了83.67%的降解率.自由基捕获实验证明,电子(e-)、羟基自由基(·OH)、空穴(h+)和氧自由基(O-·2)是降解反应中重要的活性物种.最后通过GC-MS等手段对降解机理进行了研究.     

New insights into disruption of iron homeostasis by environmental pollutants

Among the numerous health conditions environmental pollutants can cause, chronic exposure to pollutants including persistent organic pollutants (POPs) and heavy metals has been shown to disturb a specific biological homeostatic process, the iron metabolism in human body. Disorders of iron metabolism are among the common diseases of humans and encompass a broad spectrum of diseases with different clinical manifestations, ranging from anemia to iron overload, and possibly to neurodegenerative diseases and cancer. Hepcidin–ferroportin (FPN) signaling is one of the key mechanisms responsible for iron supply, utilization, recycling, and storage, and recent studies demonstrated that exposure to environmental pollutants including POPs and heavy metals could lead to disruption of the hepcidin–FPN axis along with disordered systemic iron homeostasis and diseases. This article introduces and highlights the accompanying review article by Drs. Xu and Liu in this journal, which elaborates in detail the adverse effects of environmental pollutants on iron metabolism, and the mechanisms responsible for these toxicological outcomes. It also points out the knowledge gaps still existing in this subject matter. Research that will fill these gaps will improve our understanding of the issue and provide useful information to prevent or treat diseases induced by environmental pollutants.     

The evolution of mass balance models of persistent organic pollutant fate in the environment

Current approaches to modelling the fate of persistent organic pollutants (POPs) in the environment have evolved in response to four dominant characteristics of these substances; namely: (1) the presence of POPs in virtually all environmental phases and the ease with which they move from one to the other requires multi-compartmental modelling. Describing transport across phase boundaries becomes as, or even more, important as quantifying transport within the phases; (2) POPs may persist in the environment for many decades. For chemicals that 'have time', concepts such as equilibrium partitioning and steady-state become more important than for short-lived substances whose fate is more controlled by the rates of transformation; (3) measuring POPs is difficult and expensive and observed concentrations of POPs are not available in high spatial or temporal resolution. Consequently, high resolution tends not to be a high priority in POP models; and (4) detrimental effects of POPs often manifest themselves in top predators, which has led to a focus on modelling biotic uptake and transfer within food chains. The task of building a POPs model is viewed as combining the four 'building blocks' of partitioning, transport, transformation and source data with the help of the law of the conservation of mass. Process models, evaluative models, models of real local, regional and global fate, as well as biological uptake models are presented and references to numerous examples are provided. An attempt is made to forecast future directions in the field of POPs modelling. It is expected that modelling techniques that do not rely on quantitative emission estimates as well as approaches that take into account spatial, temporal and climatic variability as well as parameter uncertainty will increase in importance. Finally, the relationship between modelling POPs and models of other pollutant issues is addressed, as are potential interactions between POPs and pollutant issues such as eutrophication, acidification and global climate change.