自燃煤矸石山覆盖材料压缩及压实特性实验

自燃煤矸石山表面构建覆盖层,需要具备一定的低渗透性能以有效阻隔空气,防止煤矸石山内部发生自燃。本研究通过室内实验,测定煤矸石山构建覆盖层涉及的碾压材料包括黄土、粉煤灰及掺有粉煤灰的混合土样的界限含水率、一维压缩特性及压实特性,揭示和分析7种覆盖材料配方的压缩压实特性,表明覆盖材料通过碾压可有效阻隔空气,起到阻燃作用;将粉煤灰掺人到一般黄土材料中,可减缓混合土样击实曲线的陡峭性,从而降低材料在碾压中对含水率的敏感度。实验旨在为进行煤矸石山覆盖层碾压提供科学的实验数据及设计参数。     

“Perceived neighbourhood” and tolerance relations: the case of Arabs and Jews in Jaffa,Israel

This paper examines the complex social reality of mixed ethnic residential areas, as reflected in drawn perceived neighbourhoods of Jews and Arabs living in homogenous and mixed neighbourhoods in Jaffa, Tel Aviv. Through in-depth interviews conducted among 89 Jaffa's residents, it illustrates how different perceptions about the residential area and its residents (including attitudes, emotions, feeling of fear/safety, collective identity and tolerant relations) are reflected in the form, size and consensus area of residents' perceived neighbourhoods. The study finds a clear association between tolerant attitudes and the size and consensus area of the perceived neighbourhoods. Arabs perceive their neighbourhood as significantly larger than Jews do and are characterised by a larger consensus area. These findings are explained by the Arab's strong social cohesion, common national identity, rootedness in Jaffa, as well as by tolerant attitudes towards Jaffa's Jewish population. The study demonstrates the interrelation between the spatial, social and perceptual dimensions associated with the mixed residential area, and illustrates how these dimensions are reflected in drawn perceived neighbourhoods.     

Demonstration of a high throughput on-board hydrogen generation reactor system using aluminum coil as fuel for a vehicle

A novel on-board hydrogen generation concept using Al coil with NaOH was investigated. The reaction rate was successfully controlled by introducing a pumping system for the NaOH solution. The time for the flow to develop fully was mainly dependent on the solution temperature, and the fastest start time recorded was 60 sec at a solution temperature of 70°C. The maximum H₂ generation rate was 200 L min^–1 with a prototype design of the on-board hydrogen generation system 1/8 times the size of a full-size reactor. The H₂ generation process coupled with the solution pumping system was simulated with three-dimensional fluid dynamic software, and the calculated H₂ flow and temperature rise of the system were validated with experimental data.     

Shift to continuous operation of an air-cathode microbial fuel cell long-running in fed-batch mode boosts power generation

Microbial fuel cells (MFCs) which are operated in continuous mode are more suitable for practical applications than fed batch ones. The aim of the present study was to characterize an air-cathode MFC operating in continuous mode and to determine the intrinsic properties for suitable performance and scalability. Air-cathode MFCs were constructed from plexiglass with a total working volume of 220 mL. Zirfon® separator used in this MFC had cross section area of 100 cm². The air cathode MFCs were operated in fed-batch mode and then shifted to the continuous mode. To determine the behavior of anode and cathode in long term operation (274 days), their contribution in MFC performance was evaluated over time. Once the active biofilm was formed, power production and substrate consumption rate were significantly higher. The internal resistance increased with the passage of time. After stabilization of biofilm when the MFC was placed in close circuit by connecting an external resistance, the anode-reference and cathode-reference electrode behavior showed that anode potential is near to the bacterial cell inside potential. The maximum open circuit voltage achieved was 623 mV and the highest power and volumetric power density were 38.03 mW/m² and 1296 mW/m³, respectively.     

Fluid bed gasification – Plasma converter process generating energy from solid waste: Experimental assessment of sulphur species

Often perceived as a Cinderella material, there is growing appreciation for solid waste as a renewable content thermal process feed. Nonetheless, research on solid waste gasification and sulphur mechanisms in particular is lacking. This paper presents results from two related experiments on a novel two stage gasification process, at demonstration scale, using a sulphur-enriched wood pellet feed.Notable SO₂ and relatively low COS levels (before gas cleaning) were interesting features of the trials, and not normally expected under reducing gasification conditions. Analysis suggests that localised oxygen rich regions within the fluid bed played a role in SO₂’s generation. The response of COS to sulphur in the feed was quite prompt, whereas SO₂ was more delayed. It is proposed that the bed material sequestered sulphur from the feed, later aiding SO₂ generation. The more reducing gas phase regions above the bed would have facilitated COS – hence its faster response. These results provide a useful insight, with further analysis on a suite of performed experiments underway, along with thermodynamic modelling.     

燃料乙醇行业环境污染控制评价指标体系的构建

在分析我国燃料乙醇行业基本信息的基础上,根据其原料特性、生产规模、生产技术、污染控制措施、环境管理等方面的特点,筛选出合适的指标,构建多层次燃料乙醇行业环境污染控制评价指标体系。运用层次分析法确定指标权重分值,建立燃料乙醇行业环境污染控制评价模型,并选取国内燃料乙醇典型企业进行调研,结合行业现状对该指标体系做出合理性和可行性分析。     

不适宜生长条件对混菌降解苯胺的影响

分别从台州和衢州某化工厂的好氧池中分离筛选得到2株苯胺降解菌TZ1和JH1,经16S rDNA测序鉴定为Comamonas sp.TZ1和Pseudomonas sp.JH1,均具有较强的苯胺降解能力,培养24 h后,可使初始浓度为800 mg/L的苯胺去除率达到96.4%~98.4%。在此基础上,按体积比1∶1将2株菌液进行混合构建了混合菌体系,进而对比考察了苯胺初始浓度、pH、盐度和重金属等环境因子对单一菌和混合菌生长量及降解苯胺效果的影响,重点探讨混合菌对不适宜生长环境的适应性及其对苯胺的降解特性。通过单一菌和混合菌对比实验发现,在适宜苯胺初始浓度、pH和盐度条件下,混合菌的生长量略高于单一菌;在不适宜生长的高浓度苯胺、pH和盐度条件下,混合菌也表现出了更强的适应性和苯胺矿化能力。Zn2+和Cr6+耐受实验则表明,对于Cr6+,混合菌表现出了更强的耐受能力,而对于Zn2+并没有表现出更强的耐受能力。     

Fuel from waste tyres and particulate matter emitted from the process

The interest in obtaining alternative fuels from waste sources and at the same time diminishing the impact of waste disposal has drawn attention to scrap tyres' carbon recovery. In order to thermally degrade used tyre rubber, a laboratory pyrolysis system was developed in this work. The installation devised focused on the production of liquid pyrolysates, where shredded rubber was supplied as the feedstock and nitrogen used as the carrier gas to provide an oxygen-free atmosphere. The variables affecting the performance of the process were investigated, including target temperature, heating rate and total residence time. Characterization of the volatile matter released was conducted by means of mass spectrometry to determine the composition of products, and particulate matter analysis to ascertain the aerosol content in the gas stream. The reproducibility of experiments, the influence of the temperature and time, and differences between the vapours before condensation and the exhaust gases are discussed. This work identified that the larger hydrocarbon fragments condense to constitute the oils, whereas the lighter molecules remain as non-condensable gases. This work also identified that the total number of nano-scale particles carried by the exhaust stream varies with temperature; significant changes in the composition of products and particle content were reported at approximately 400°C. The high number of nano-scale solid particulate matter present in the exhaust gases suggests that a thorough treatment for that stream would be required to avoid human health hazards.     

共基质下微生物燃料电池同步脱色甲基橙与产电性能

采用双室方形微生物燃料电池(MFC),以葡萄糖作为共基质,研究了共基质浓度对典型偶氮染料甲基橙在MFC阳极室中脱色效率及同步产电的影响。结果表明,在0~1.5 g/L浓度范围内,共基质浓度越大,甲基橙脱色率、COD去除率和最大输出电压越高。在共基质浓度为1.5 g/L,进水甲基橙为300 mg/L的条件下,8 h的脱色率高达95%,且在1 000Ω外电阻下,最大输出电压达到662 m V;在无共基质条件下,8 h内对300 mg/L甲基橙的脱色率仅为7.5%,最大输出电压仅达到140 m V。厌氧对照实验表明,甲基橙在MFC中可以实现加速脱色,反应8 h后甲基橙在MFC中的脱色率提高了57%。该研究为开发新型MFC降解偶氮染料废水技术提供了理论依据。     

生物质直接燃烧发电技术的探索

介绍了生物质直接燃烧发电技术原理及其设备的工作过程,着重讨论了生物质锅炉燃烧过程中的燃料收集和存储、送料堵塞以及受热面结焦等问题,并提出了优化运行和提高锅炉效率的改进措施。