A new approach for modelling potential effects in cation adsorption onto binary (hydr) oxides

The current approach for modelling ion adsorption onto binary (hydr)oxides using homogeneous surface complexation models involves the assumption of either an ideal mixture of the two surfaces (i.e. two surface sites on one surface) or a patchwise surface (i.e. two surfaces with one surface site on each surface). As the physical truth should be between these two limiting cases, a model which assumes a patchwise surface constituted of three patches is proposed. Two patches represent the distinct (hydr)oxides, and the third one a mixture of these distinct (hydr)oxides. Using the diffuse layer model, the three approaches are applied to literature data for Cd adsorption onto binary mixtures of alumina-coated silica at total constant Cd concentration and varying amounts of alumina coatings. For Cd adsorption onto these binary (hydr)oxide systems, the new approach explains the observed potential effects. The proposed model, which contains two additional adjustable parameters in terms of site concentrations or one adjustable parameter in terms of specific surface area, is more successful than the two limiting cases. The new model is then validated by predicting Ca and Zn behaviour on the same binary (hydr)oxide system.     

一体化间歇曝气完全混合活性污泥法

一体化间歇曝气完全混合活性污泥法处理装置采取特殊的沉淀区构造,改变了活性污泥的循环流动方式,通过间歇曝气,反应区交替处于好氧/缺氧状态,达到了有机物高效去除、高效硝化反硝化及控制污泥膨胀的效果.该方法具有出水水质好、运行稳定、能耗低、流程简洁和操作管理方便的特点,是一种很有发展潜力的一体化中小型生活污水、城市污水处理系统.     

基于精细化观测的沙尘通量分布特征

研究沙尘随高度的变化特征对揭示沙尘物质在近地层分布特征具有重要意义。为揭示0—80 m沙尘通量的垂直分布规律,在野外实测的基础上,选取2008年7月20日、8月7日、8月19日、8月29日4次沙尘天气,对贴地层（0—0.05 m）、中间层（0.05—2 m）、近地层（2—80 m）的沙尘通量进行对比分析。结果表明：贴地层（0—0.05 m）,沙尘通量随着高度的增高呈增加趋势,最大值为1604.29 g?mm^?2。中间层（0.05—2 m）,沙尘通量随高度分布的关系为幂函数关系,且随着高度的升高沙尘通量减小,决定系数R²值均在0.9以上。近地层（2—80 m）,沙尘通量随高度增加呈分段函数分布,32 m、48 m处为沙尘通量的拐点高度。由此看出,研究沙尘通量对阐明沙尘输送机制非常重要,不仅可加强对沙尘输送的定量研究,还可为沙尘输送的数值模拟提供重要参数。     

WRF模式对污染天气下边界层高度的模拟研究

大气边界层高度是影响大气污染物浓度的重要因素之一,但数值模式中选择不同边界层参数化方案模拟的边界层高度有很大差异.利用WRF模式中5种边界层参数化方案及2006~2007年春、秋、冬3季河北香河地区激光雷达观测资料,对比分析了污染天气下,不同边界层方案对边界层高度的模拟效果,并分析了误差产生的可能原因.结果表明：5种参数化方案均能模拟出3季污染天气下边界层高度的变化特征,但各方案模拟的边界层高度与观测之间均存在较大误差.模拟的最大边界层高度月变化特征显示,秋冬季的模拟结果与观测值匹配较好,春季偏差较大;模拟的边界层高度日变化显示,均方根误差：春季 > 秋季 > 冬季,且误差在午后（14：00~18：00）更加明显;对该地区而言,非局地YSU方案能较好地模拟污染天气下的边界层高度;各参数化方案中边界层高度计算方法的不同及对大气廓线、湍流动能的模拟差异,可能是造成模拟边界层高度产生误差的主要原因.     

基于HLA的大气环境仿真应用研究

针对大气环境仿真的特点,采用HLA分布式仿真技术,论述了以HLA/RTI为支撑的大气环境分布式仿真体系结构、关键技术及实现方案,并对该环境下开发大气环境联邦成员进行了详细的说明,实现了大气环境建模与仿真应用的一体化设计,从而提高了大气环境仿真应用的互操作性和可重用性,为大气环境仿真向其它系统仿真应用提供了一种有效的手段。     

武汉阳逻砾石层ESR地层年代学研究

武汉"阳逻砾石层"是长江中下游新生代的一个重要的岩石地层单位,其形成年代一直是地质和地理学者关注的重要问题。为了更深入地探讨这一问题,在它的两个典型的剖面中采集了8个样品进行ESR地质年代测试,测试结果表明,阳逻砾石层形成于新近纪早更新世中晚期。将本次ESR测年数据与前人的热释光的测年数据、江汉平原西缘和北缘相同岩石地层层位和相同地貌位置的砾石层的测年数据、长江中下游网纹砾石层的测年数据比较发现,它们具有较好的一致性。     

化学絮凝剂预处理马铃薯淀粉废水的比较研究

马铃薯淀粉废水产生的季节性使得常规生物处理应用起来存在很大困难,采用絮凝剂对废水进行预处理可减轻后续处理负担。文章使用常规化学絮凝剂AlCl3、Fe2(SO4)3、PAM以及有机和无机之间的相互复配对马铃薯淀粉废水进行絮凝预处理,研究了投药量、废水pH值、助凝剂CaCl2投加量以及沉降时间等因素对絮凝效果的影响,确定了各絮凝剂处理废水的较佳絮凝条件,并在较佳条件下处理废水,通过综合比较处理效率、处理成本、絮凝条件难易程度等方面,确定了马铃薯淀粉废水的较佳絮凝剂为AlCl3+PAM,其具有废水处理效果好(COD去除率为41.08%,浊度去除率为95.06%,色度去除率为90.63%)、投药量少(2mLAlCl3+0.3mLPAM)、助凝剂投加量少(1mLCaCl)2、较佳pH在废水初始pH范围内、处理成本低(11.05元/t废水)、产生污泥量少(649g/t废水)等优点。     

好氧锥形流化床生物膜反应器启动与生物膜形成特征研究

对好氧锥形流化床膜生物反应器（A-TFBBR）的启动特征、生物膜行为、特征和结构进行了详细的探讨,并与相近启动条件下的传统柱状流化床生物膜反应器（A-CFBBR）的启动行为进行比较.结果表明,自然培养生物种源的方法与传统的以活性污泥做种源的方法相比节省了生物驯化和淘汰的时间,在短时间内就完成了生物反应器的启动（柱状床11 d,锥形床16 d）,而一般以活性污泥为种源则大都需要100～300 d的启动时间.另外,采用这种方法在A-TFBBR反应器和A-CFBBR反应器中获得的生物膜厚度分别仅为(32±1) μm 和(24±2) μm,低于大部分报道的生物膜厚度.2个生物反应器都表现出理想的COD去除能力,其中A-TFBBR反应器对COD的去除率高达95%以上,比A-CFBBR对COD的去除率平均高出15%.     

Effects of tectonic stress environment on tectonophysical features of deformed coal

To study the effects of the tectonic stress environment on the tectonophysical features of deformed coal, No.8 Mine in the Pingdingshan mine area is used as a study area and the relationship between the development of deformed coal, distribution of fractures, formation of deformed coal and tectonic stress environment are analyzed. The results indicate that the thickness of the bedrock layer should be included in the analysis of the tectonic stress environment for a region of intense tectonic activity. Although the reverse faulting stress regime can control the development of deformed coal, the C seam is extremely sensitive to the stress regime. The most advantageous direction of the deformed coal fractures is consistent with the regional maximum principal stress, and the development of fractures is closely related to the evolution of the tectonic stress environment. The fracture density of the E seam presents a uniform distribution, yet that of the C seam is completely heterogeneous. Superposition and compounding of the tectonic communities evidently increase the fracture density of the deformed coal. There is a relatively apparent boundary between the different types of deformation, which gradually transform from brittle to ductile with a decreasing lateral pressure coefficient. A generalized deformation pattern of the deformed coal is proposed and can be divided into frictional sliding and solid flow.     

Experimental investigation on effect of an absorber plate covered by a layer of sand on the efficiency of passive solar air collector

A passive flat-plate solar air collector was constructed in the laboratory of New and Renewable Energy in Arid Zones, Ouargla University, South East Algeria. The absorber of the passive flat-plate solar air collector was laminated with a thin layer of local sand. This acted as a thermal packed bed with a collecting area of 0.5 m² (1 m × 0.5 m). Three series of experiments were performed. The first consisted of choosing the best sand brought from three different places of the Algerian desert. The second consisted of studying the effect of the thickness of the sand layer on the daily efficacy of the collector. The influence of the sand diameter was investigated in the third series. The experimental results showed that: All collectors covered with sand had higher efficiency than those without. It was noticed that, for a fixed mass of sand (given thickness of the sand layer), the improvement of the collector was inversely proportional to the sand particle diameters. The maximum efficiency approximates 62.1% for a particle diameter 0.063 mm, compared to 41.71% for a diameter 0.250 mm.The efficiency of the collector for a fixed particle diameter increases with the increase in the thickness of the sand layer. The collector with thickness sand layer 0.84 mm gave the best efficiency of 46.14% compared to 27.8% for 0.28 mm of thickness sand layer.