含半无限长裂纹压电材料的Ⅲ型强度因子

研究了含半无限长裂纹压电材料在平面内电场和反平面荷载作用下的问题 ,得到了满足拉普拉斯方程、裂纹面边界条件的位移函数解和电势函数解及电弹场的基本解 ,并得到了应力、应变、电位移强度因子和能量释放率。研究结果表明 ,在裂尖 ,电场强度没有奇异性 ,而应变、应力、电位移具有奇异性。     

煤矿轴流式局部通风机的降噪试验研究

煤矿局部通风机（简称“局扇”）的噪声是煤矿掘进中的主要噪声源，分析了局扇噪声的产生机理，提出了减少局扇的动叶叶顶与机壳间隙，在局扇入口加阻性消声器和在机壳涂上一层阻尼材料等方法来控制局扇的噪声方法，方法在JBT52－2型局扇的试验研究表明，实施上海降噪措施，局扇的噪声有大幅度降低，可使局扇的噪声达到工矿企业噪声卫生标准要求。     

循环流化床锅炉床温控制方法

就目前电厂循环流化床锅炉运行中存在的床温波动问题，讨论了导致床温波动的因素，并针对性地提出了控制床温的一些措施。     

现代化工分离技术在环境保护中的应用

介绍了高效导向筛板、新型高效填料、超临界流体萃取等现代化工分离技术及其在清洁生产和废物处理方面的应用。     

Oil/Suspended Particulate Material Interactions and Sedimentation

The interactions of physically dispersed oil droplets with suspended particulate material (SPM) can be important for the transport of bulk quantities of spilled crude oil and polycyclic aromatic hydrocarbons (PAH) to subtidal sediments. The literature regarding oil/SPM interactions is reviewed, and results from whole-oil droplet/SPM interaction kinetics and pure-component (Prudhoe Bay crude oil distillate cut) equilibrium partitioning experiments are presented. The effects of oil type, SPM characteristics, and salinity on the interaction rates are examined, and the importance of whole-oil droplet/SPM interactions on particle agglomeration and settling behavior are discussed. Whole-oil droplet/SPM interactions are retarded as oil droplet dispersion into the water column is inhibited by oil viscosity increases due to evaporation weathering and water-in-oil emulsification. Compared to whole oil droplet/SPM interactions, dissolved-component/SPM adsorption is not as significant for transport of individual components to sediments. The information presented in this paper can be used to augment computer-based models designed to predict oil-spill trajectories, oil-weathering behavior, and spilled oil impacts to the marine environment.     

磁分离技术在我国废水处理中的研究进展

本文介绍了磁分离技术的基本原理、分离方法和设备，综述了该技术在某些特定废水处理中的应用现状。磁分离技术的实际应用具有分离效率高、分离速度快、选择性好、处理对象广、成本低廉、分离物系的粒度可达到很小，并且不受处理体系的温度、密度、酸碱度限制等优点，可以使某些采用传统分离方法较难或不能分离的物系得以顺利地分离，有较为广泛的应用前景。     

焦化黄血盐吸收塔填料自燃原因分析

焦化黄血盐系统内的吸收塔在停产检修补充填料——铁刨花期间，经常发生铁刨花自燃现象，这是严重的事故隐患。结合武钢焦化公司黄血盐工艺特点，对其自燃原因作了详细分析，提出了避免此类事故发生的措施。     

Numerical Simulation of Synoptic Condition on a Severe Sand Dust Storm

By using observational data and MM5, an observational analysisand numerical study was conducted on the synoptic condition of a severe dust storm that was caused by a Mongolian cyclone whichoccurred from 6 to 8 April 2001. Results illustrated thatthe cyclogenesis was due to the isentropic potential vorticity (IPV) advection in the upper troposphere and the terrain modifiedbaroclinicity in the mid-lower troposphere. The Altai-Sayan complex of mountains blocked the lower level cold air and made the isentropic surface sharply steep. When the air slid down along the isentropic surface the increasing of baroclinicity anddecreasing of stability blew up the vertical vorticity development.The formation of the dust storm was a result of a cyclonic cold front passing across the area. The occurrence of this dust stormwas closely related to the strong surface wind, which was accompanied by a cold front passing, rather than the cyclogenesis, itself. Hence, the reason for the pre-front dust storm formulation was the formation of heating convection. Reasons behind the formation of a black storm (visibilitylower than 50 m), which occurred in the mid-north part ofInner Mongolia, lay in several aspects. Firstly, in thisarea the surface wind was strong, a direct result of thedownward transport in mid-lower troposphere. Secondly,the cold front passed over the effected area near sunsetso the air obtained much more surface heating to form adeeper mixed layer (ML). Thirdly, cooperation between thelower level wind and the terrain made the atmosphere inthis area and acquired the maximum advective contributionnecessary to form a deep post-front ML. The sensitivityexperiment revealed that surface heat flux was important to the frontal lifting. In addition, the forcing of surface heating wasalso seen as the primary forcing mechanism of frontogenesis. Meanwhile, removal of the surface heat flux made the atmosphericstratification became stable and the pre-storm ML very shallow,which weakened the strength of the dust storm.     

活性炭膜处理工业废水的试验研究

将活性炭膜与常规弹性材料同时作为生物接触氧化处理工艺的填料,分别加装在相同条件的两套接触氧化池中,采用生物接触氧化处理工艺,在同样的条件下处理工业废水,经过对试验数据的对比分析得出:以活性炭膜为填料,处理废水的能力更强,净化效果更好。     

半敞开烟气排放的测试方法的研究

综合分析了除尘系统进入的烟尘量、排放方式、排放浓度等5个参数及其相互关系,根据在一定时间内进入除尘系统烟气烟尘的量;对除尘器进口和出口即百叶窗内各方向烟尘浓度的测试,利用物料平衡方程,确定百叶窗内各测点各方向测定的烟气烟尘浓度,确定半敞开排放烟气烟尘的排放浓度,笔者发现,外排烟尘浓度与百叶窗内侧向烟尘浓度具有良好的线性关系,百叶窗内侧向测定烟尘浓度能够反映半敞开烟气排放浓度。据此,提出以半敞开方式排放烟气烟尘的除尘系统烟气烟尘浓度测试方法,即侧向间接测试法。