甘油基混合培养物合成PHA及其与OUR的关系

聚β羟基烷酸盐(PHA)以其较好的生物相容性、可生物降解性和再生性成为最有前途的生物高分子材料.本文基于甘油作为基质在饱食-饥饿模式下富集合成PHA的混培物,以乙酸、丙酸、丁酸、乳酸和葡萄糖作为基质考察混培物合成PHA的基质广谱性,结果表明乳酸和乙酸作为基质时PHA的产率系数较高;使用不同比例乙酸/丙酸混合基质时,PHA产量随着乙酸含量的增加而增大,乙酸/丙酸为3∶1时PHA产量最高.通过活性污泥同时贮存与生长模型模拟与线性回归两种方法证实,在单一基质或乙酸/丙酸混合基质情况下,PHA合成速率与OUR存在线性关系,因此,基于在线OUR测量数据可以实时估计PHA合成量.     

锂电池正极材料Li2FeS2的充放电机理与热稳定性

随着移动电子设备的飞速发展,锂电池作为新型的能源载体也取得了巨大的进步。与嵌入式氧化物正极材料相比,Li2FeS2不仅具有理想的循环性能,而且其理论容量达到400mAh／g,约为嵌入式氧化物正极材料的2倍。因此,本文从晶体结构、电化学性能、充放电机制、充放电过程中的离子电导率变化以及热稳定性等方面对Li2FeS2正极材料进行了详细的阐述。     

缙云山3种典型森林降雨过程及其氮素输入

选取重庆缙云山的常绿阔叶林、毛竹林和针阔混交林为研究对象,于2012年5~10月对大气降水、穿透雨和树干径流等降水过程及其氮素输入进行研究.结果表明:①研究期间总降雨量564.88 mm,常绿阔叶林、毛竹林和针阔混交林的穿透雨量占总降雨量的比例分别为74.0%、85.0%和71.6%,且树干径流量所占比例分别为1.9%、10.3%和1.6%;3种林分的穿透雨量、树干径流量与林外降雨量之间均呈显著的线性关系(P<0.05),且穿透雨率、树干径流率与林外降雨量之间都呈对数关系(P<0.05).②与大气降水相比,穿透雨和树干径流的NO-3和NH+4浓度要高,且3种林分的大小关系为针阔混交林>常绿阔叶林>毛竹林;穿透雨和树干径流的总无机氮输入量(以N计)分别为针阔混交林(18.93 kg·hm-2)、常绿阔叶林(14.93 kg·hm-2)和毛竹林(15.31 kg·hm-2).③3种林分的无机氮输入量与穿透雨量、树干径流量之间均呈显著的线性关系(P<0.05).     

甲硫醇降解菌群筛选及其降解特性研究

从处理甲硫醚(DMS)和丙硫醇(PT)混合废气的生物滴滤塔中富集出一组能够有效降解甲硫醇(MT)的混合菌群,并对其特性进行了系列研究.结果表明,该混合菌群能有效降解MT,菌群较为适宜的生长和降解条件为30℃、p H=7.0,在该条件下能将初始浓度为20 mg·L~(-1)的MT在70 h内降解完全.添加酵母膏(YE)后,MT降解速率进一步提高,降解所需时间缩短10 h.利用高通量测序技术分析混合菌群的群落结构,发现其中优势菌属为Pseudomonas sp.、Thiobacillus sp.和Acinetobacter sp.,所占比例分别为33.78%、21.91%和17.01%.中间产物检测结果表明,混合菌群降解MT的过程中产生了甲醛、H_2S、二甲基二硫醚(DMDS)等物质,推断MT的降解途径可能有如下2条:(1)MT在MT氧化酶作用下形成甲醛和H2S,随后氧化为SO_4~(2-);(2)MT依次转化为DMDS、DMS、二甲基亚砜(DMSO)和二甲基砜(DMSO_2),最后经甲基磺酸(MSA)可生成SO_4~(2-).     

中国铝生命周期能耗与碳排放的情景分析及减排对策

铝工业是高能耗高排放工业,探索铝工业的节能减排路径有助于我国实现《巴黎协定》中的温室气体减排承诺.采用物质流分析和生命周期评价方法,基于存量水平、技术水平和能源结构设置了15种情景,研究了我国铝工业1990～2100年的能耗和碳排放量,探索不同路径下的节能减排潜力.我国铝在用存量将在2040～2050年达到峰值(4.6...     

Selection of appropriate organic additives for enhancing Zn and Cd phytoextraction by hyperaccumulators

Chelant-enhanced phytoextraction is one of the most promising technologies to remove heavy metals from soil. The key of the technology is to choose suitable additives in combination with a suitable plant. In the present study, laboratory batch experiment of metal solubilization, cress seeds germination were undertaken to investigate the metal-mobilizing capability and the phytotoxicity of organic additives, including ethylene diamine triacetic acid （EDTA）, citric acid, acetic acid, oxalic acid, glutamine and monosodium glutamate waste liquid （MGWL） from food industry. Experiments in pots were carried out to study the effects of the additives on Zn and Cd phytoextraction. Furthermore, a leaching experiment with lysimeter was performed to evaluate the environmental risks of additive-induced leaching to underground water. The results showed that EDTA had a strong mobilizing ability for Zn and Cd, followed by mixed reagent （MR） and MGWL. MGWL and acetic acid at 5 mmol equivalent per liter resulted in seed germination index less than 2%. Experiments in pots verified the phytotoxicity of acetic acid and MGWL. Addition of the mixed reagent at 6--10 mmol/kg significantly increased Zn phytoextraction by Thlaspi caerulescens. The same for EDTA and the mixed reagent at 10 mmol/kg by Sedum dfredii. But only mixed reagents could significantly increase Cd phytoextraction by the studied hyperaccumulators. This suggested that the strong chelant was not always the good agent to enhance phytoextraction. S. alfredii combined with 2--10 mmol/kg soil MR was preferred for phytoremediation of Cd/Zn contaminated soils in southern China, this could result in high phytoextraction of Cd/Zn and reduce the leaching risk to underground water than EDTA assisted phytoextration.     

侧向风速作用下聚氨酯泡沫双火源火蔓延研究

为探究环境风作用下逆向双点火源聚氨酯泡沫火蔓延及融合行为,开展多组对照实验并从材料传热机理角度分析侧向风速对火蔓延行为中火羽流形态、质量损失和辐射热流场等特征参数的影响。结果表明:风速与上述参数之间存在非线性关系。环境风效应使火焰被拉长且敷贴于预热区表面,增大预热区面积和热反馈;侧向风速的增加对FPU板材质量损失的影响逐渐弱化,且板材的熔滴率与风速呈正相关;无论侧向风是否存在,两侧逆向火焰融合后均达到整个蔓延过程中的峰值温度;风速的存在限制了火焰温度与辐射热通量峰值,也缩短了温度和辐射峰值出现的时间。     

屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果,需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试,探究人体在不同环境温度下体表温度的变化,得出胸部、背部及额头为热量最高部位,并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型,对不同环境中的屏蔽服冷却效果展开研究,分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇,均可帮助人体降低体温,提高舒适度。     

瓦斯抽采PC-CAS基封孔材料优化及其膨胀作用分析*

为了研制以硅酸盐/铝酸盐水泥、生石灰、生石膏为主的PC-CAS基封孔材料,采用正交试验优化材料配比、开展膨胀力研究,并用扫描电镜观测料-煤胶结形貌。研究结果表明:材料的最优配比为A2B2C4,其具备优良的流动性、强度及致密性,造浆量达2 100 mL/kg;PC-CAS基材料具有显著的膨胀性,其膨胀力随时间先增大而后趋于稳定,并且该膨胀力随着径向约束的提高而增大;相比于FP材料,PC-CAS基材料产生的膨胀力能够显著降低材料-煤岩界面的空隙并在一定程度上压密煤体内部的裂隙;该材料产生的膨胀力可压密封孔段围岩、提高封孔质量,并为后期“二次注浆”提供保压条件。工业试验结果表明,采用PC-CAS基材料进行封孔可显著改善抽采效果,将原有平均浓度10.11%提升至20.08%。     

Explosion suppression of porous materials in a pipe-connected spherical vessel

To study the suppression of different porous materials on the explosion of combustible gas, some experiments were implemented. The porous materials were categorized into three kinds, including six subcategories, and the explosion suppression characteristics of the thin iron hoop, one-layer porous materials, two-layer composite porous materials, and three-layer composite porous materials were studied and analyzed. The results show that a rarefaction wave appears in the spherical vessel during the rapid development stage of combustion explosion. Further, the thin iron hoop could enhance the gas explosion intensity. And the explosion intensity suppression effect of the porous materials is obvious, the best effects of one-layer, two-layer and three-layer porous materials are from Fe–Ni 10 mm/40 PPI, Fe–Ni 10 mm/90 PPI + Al₂O₃ 10 mm/30 PPI, and Al₂O₃ 10 mm/50 PPI + Fe–Ni 10 mm/40 PPI + SiC 20 mm/20 PPI, respectively. According to the surface morphology of the porous materials, the anti-sintering ability of the three categories of porous materials follows the order of Al₂O₃ > SiC > Fe–Ni. Besides, the thickness and pore size of the combined porous material was changed, which has a great influence on the explosion pressure and the explosion intensity.