沉积物间隙水的几种制备方法

间隙水的制备对研究沉积和中物质的动力学非常重要。间隙水的制备方法有离心法、压榨法、渗析法、吸气引液法等，这些方法各有利弊。本文对这些方法分别进行了了综合比较。     

Whose lawn is it anyway? Redefining problems and the implementation of municipal stormwater policies

Research of problem definitions typically centres on agenda setting and formulation with less attention given to implementation. In recognition of this gap, this analysis examines the relationship between issue definition, issue redefinition and policy implementation by reviewing two municipal stormwater plans. The results suggest that in larger issue contexts replete with ambiguity and uncertainty, problem definitions are often “tweaked” and adapted during the implementation process. In short, street-level bureaucrats craft “genetically related” but idiosyncratic problem definitions – that fit their own policy-making context. In the case of stormwater, “solutions”; are best described as dynamic policies built upon the values associated with technical expertise, public participation and environmental sustainability.     

Effects of Climate and Land Cover on Hydrology in the Southeastern U.S.: Potential Impacts on Watershed Planning

The hydrologic response to statistically downscaled general circulation model simulations of daily surface climate and land cover through 2099 was assessed for the Apalachicola‐Chattahoochee‐Flint River Basin located in the southeastern United States. Projections of climate, urbanization, vegetation, and surface‐depression storage capacity were used as inputs to the Precipitation‐Runoff Modeling System to simulate projected impacts on hydrologic response. Surface runoff substantially increased when land cover change was applied. However, once the surface depression storage was added to mitigate the land cover change and increases of surface runoff (due to urbanization), the groundwater flow component then increased. For hydrologic studies that include projections of land cover change (urbanization in particular), any analysis of runoff beyond the change in total runoff should include effects of stormwater management practices as these features affect flow timing and magnitude and may be useful in mitigating land cover change impacts on streamflow. Potential changes in water availability and how biota may respond to changes in flow regime in response to climate and land cover change may prove challenging for managers attempting to balance the needs of future development and the environment. However, these models are still useful for assessing the relative impacts of climate and land cover change and for evaluating tradeoffs when managing to mitigate different stressors.     

Comparing Green and Grey Infrastructure Using Life Cycle Cost and Environmental Impact: A Rain Garden Case Study in Cincinnati,OH

Green infrastructure (GI) is quickly gaining ground as a less costly, greener alternative to traditional methods of stormwater management. One popular form of GI is the use of rain gardens to capture and treat stormwater. We used life cycle assessment (LCA) to compare environmental impacts of residential rain gardens constructed in the Shepherd's Creek watershed of Cincinnati, Ohio to those from a typical detain and treat system. LCA is an internationally standardized framework for analyzing the potential environmental performance of a product or service by including all stages in its life cycle, including material extraction, manufacturing, use, and disposal. Complementary to the life cycle environmental impact assessment, the life cycle costing approach was adopted to compare the equivalent annual costs of each of these systems. These analyses were supplemented by modeling alternative scenarios to capture the variability in implementing a GI strategy. Our LCA models suggest rain garden costs and impacts are determined by labor requirement; the traditional alternative's impacts are determined largely by the efficiency of wastewater treatment, while costs are determined by the expense of tunnel construction. Gardens were found to be the favorable option, both financially (~42% cost reduction) and environmentally (62‐98% impact reduction). Wastewater utilities may find significant life cycle cost and environmental impact reductions in implementing a rain garden plan.     

兼氧混合菌对亚甲基蓝废水生物降解实验研究

采用厦门某生物科技有限公司提供的兼氧混合菌为研究对象,利用相关设备进行中试实验,验证了该项技术的可行性。同时探究了重金属对该混合菌种生物降解能力的影响,通过中试实验研究后发现5mg/L的重铬酸钾和硫酸铜均对该混合菌种的生物降解能力有一定的影响,并且硫酸铜的影响大于重铬酸钾。此外该技术对甲基橙、刚果红废水也有一定的生物降解能力,这为兼氧混合菌用于印染废水处理提供了实验依据。     

Resolution and Analysis of Spatial Variations and Patterns in an Urban Lake with Rapid Profiling Instrumentation

Rapid response vertical profiling instrumentation was used to document spatial variability and patterns in a small urban lake, Onondaga Lake, associated with multiple drivers. Paired profiles of temperature, specific conductance (SC), turbidity (T_n), fluorometric chlorophyll a (Chl_f), and nitrate nitrogen (NO₃^?) were collected at >30 fixed locations (a “gridding”) weekly, over the spring to fall interval of several years. These gridding data are analyzed (1) to characterize phytoplankton (Chl_f) patchiness in the lake's upper waters, (2) to establish the representativeness of a single long‐term site for monitoring lake‐wide conditions, and (3) to resolve spatial patterns of multiple tracers imparted by buoyancy effects of inflows. Multiple buoyancy signatures were resolved, including overflows from less dense inflows, and interflows to metalimnetic depths and underflows to the bottom from the plunging of more dense inputs. Three different metrics had utility as tracers in depicting the buoyancy signatures as follows: (1) SC, for salinity‐enriched tributaries and the more dilute river that receives the lake's outflow, (2) T_n, for the tributaries during runoff events, and (3) NO₃^?, for the effluent of a domestic waste treatment facility and from the addition of NO₃^? solution to control methyl mercury. The plunging inflow phenomenon, which frequently prevailed, has important management implications.     

Evaluating Alternative Temporal Survey Designs for Monitoring Wetland Area and Detecting Changes Over Time in California

Evaluation of wetland extent and changes in extent is a foundation of many wetland monitoring and assessment programs. Probabilistic sampling and mapping provides a cost‐effective alternative to comprehensive mapping for large geographic areas. One unresolved challenge for probabilistic or design‐based approaches is how best to monitor both status (e.g., extent at a single point in time) and trends (e.g., changes in extent over time) within a single monitoring program. Existing wetland status and trends (S&T) monitoring programs employ fixed sampling locations; however, theoretical evaluation and limited implementation in other landscape monitoring areas suggest that alternative designs could increase statistical efficiency and overall accuracy. In particular, designs that employ both fixed and nonfixed sampling locations (alternately termed permanent and temporary samples), termed sampling with partial replacement (SPR), are considered to efficiently and effectively balance monitoring current status with detection of trends. This study utilized simulated sampling to assess the performance of fixed sampling locations, SPR, and strictly nonfixed designs for monitoring wetland S&T over time. Modeled changes in wetland density over time were used as inputs for sampling simulations. In contrast to previous evaluations of SPR, the results of this study support the use of a fixed sampling design and show that SPR may underestimate both S&T.     

农药混配制剂环境风险评估现状与展望

本文综述了欧洲和美国农药混配制剂的环境风险评估方法。详细介绍了欧洲食品安全局(EFSA)评估体系中的2种方法,即,基础的"整体测试法"和近年来提倡的"基于组分的方法"。"基于组分的方法"的特点是以浓度加和模型(CA模型)作为默认假设进行初级评估,以独立作用模型(IA模型)等作为高级评估手段的农药混配制剂环境风险评估方法。此外,本文还介绍了模型偏差率(MDR)、毒性相似度及毒力单元(TU)等概念以及混配制剂风险评估流程。本文的目的旨在为建立我国农药混配制剂的环境风险评估方法体系提供参考。     

黄土高原不同地貌类型区农田土壤有机碳采样布点方法研究

采样设计是土壤有机碳研究中面临的首要问题。论文对黄土高原不同地貌类型区农田土壤有机碳进行抽样样本代表性评价,对比分析了不同采样方法的样点布设效率,结果表明：1）高塬区合理采样布点方法应为网格布点法,采样点布设格网间隔4 km,网格布点法较随机布点法和联合单元布点法效率分别提高64.3%和31.8%;2）平原区合理采样布点方法应为网格布点法,采样点布设格网间隔2 km,网格布点较随机布点和联合单元布点效率分别提高64.8%和128.8%;3）丘陵区合理采样布点方法应为联合单元布点法,样点布设密度为1个/1 314 hm²,联合单元布点较随机布点和网格布点效率分别提高205.8%和294.2%。     

铝材Sn-Ni混合盐电解着枪色参数研究

首先对铝片试样进行预处理,随后在恒定的电流密度和相同的氧化时间下,在铝材表面形成厚度均匀的阳极氧化膜,然后采用方波交流电,对铝试样进行电解着色处理,通过改变铝材电解着色工艺的着色时间、电流密度、正负电流比、占空比等因素来研究这些因素与铝材明度值和色差之间的关系。实验结果表明获得枪色的最佳工艺条件是:着色时间6m in左右,着色电流密度为1.40 A/dm2左右,正向电流比负向电流大7%左右,占空比55%左右。