Comparative analysis of data reduction techniques for questionnaire validation using self-reported driver behaviors

Introduction: Exploratory data reduction techniques, such as Factor Analysis (FA) and Principal Component Analysis (PCA), are widely used in questionnaire validation with ordinal data, such as Likert Scale data, even though both techniques are indicated to metric measures. In this context, this study presents an e-survey, conducted to obtain self-reported behaviors between Brazilian drivers (N = 1,354, 55.2% of males) and Portuguese drivers (N = 348, 46.6% of males) based on 20 items from the Driver Behavior Questionnaire (DBQ) on a five-point Likert Scale. This paper aimed to examine DBQ validation using FA and PCA compared to Categorical Principal Component Analysis (CATPCA) which is more indicative to use with Likert Scale data. Results: The results from all techniques confirmed the most replicated factor structure of DBQ, distinguishing behaviors as errors, ordinary violations, and aggressive violation. However, after Varimax rotation, CATPCA explained 11% more variance compared to FA and 2% more than PCA. We identified cross-loadings among the component of the techniques. An item changed its dimension in the CATPCA results but did not change the structural interpretability. Individual scores from dimension 1 of CATPCA were significantly different from FA and PCA. Individual scores from factor 1 of CATPCA were significantly different from FA and PCA. Practical applications: The CATPCA seems to be more advantageous in order to represent the original data and considering data constrains. In addition to finding an interpretable factorial structure, the representation of the original data is regarded as relevant since the factor scores could be used for crash prediction in future analyses.     

基于模糊推理的FRAM事故定量分析方法研究

为有效克服FRAM事故分析中无法进行定量分析的缺陷,提出结合模糊推理技术的Fuzzy FRAM模型。此改进模型基于FRAM识别系统运行状态;依据功能输出要素的时间/精度属性利用Matlab构建2阶模糊推理系统量化功能输出质量;根据通用性能条件(CPC)及功能输入耦合端口构建功能评价体系,针对评价体系中存在的不确定性信息融合及建模问题,采用模糊证据推理技术,通过模糊信度结构建立、数据处理、信息融合测度后获得功能的风险指数;以既有铁路危险品运输事故为例,验证方法的可行性。结果表明:Fuzzy FRAM模型的评估结果较为精确,是FRAM分析方法的有效补充。     

中国南海高温高压井钻完井损失工时事件统计分析

为研究我国南海高温高压井钻完井、测试损失工时事件规律,对2009—2018年中国南海高温高压探井钻井日志进行分析,汇总501起海上高温高压井钻完井损失工时事件,并将其划分为复杂情况及事故停工、自然停工、修理停工3大类进行研究。结果表明:复杂情况及事故停工事件数与年份无明显关联,但与地质资料准确度关系密切,修理停工事件数随年份呈现震荡下降趋势;复杂情况及事故停工总损失工时最多,其中卡钻损失工时占比最高;修理停工总损失工时最少,其中钻井设备故障损失工时占比最高;灾难天气、洋流或地质活动是造成损失工时最多的原因,不安全行为是单起事件平均损失工时最多的原因,设备老化是修理停工最主要原因。研究结果可为后续高温高压井钻完井非生产时间成本估计模型提供数据基础。     

施工组织正式网络结构特征对组织安全行为的影响关系研究

为提升建筑施工安全管理水平,探讨施工组织正式网络的结构特征对组织安全行为的影响关系。基于社会网络分析方法,引入安全沟通作为中介变量,建立施工组织正式网络结构特征、安全沟通和组织安全行为的假设模型。基于91个施工组织正式网络结构特征分析,使用多层回归分析方法检验假设模型。结果表明:网络密度、出度中心势和聚类系数均显著正向影响组织安全行为;中间中心势和平均路径长度均显著负向影响组织安全行为;入度中心势对组织安全行为影响不显著;安全沟通分别在出度中心势和中间中心势与组织安全行为的关系中起完全中介作用;安全沟通分别在密度、平均路径长度和聚类系数与组织安全行为的关系中起部分中介作用;安全沟通在入度中心势与组织安全行为的关系中未起到中介作用。     

基于CREAM和贝叶斯网络的空管人误概率预测方法

针对研究管制人因可靠性时存在的模糊性和片面性问题,采用认知可靠性与失误分析方法（CREAM）中的扩展预测法,计算10项管制通用任务的人误概率;在此基础上,以管制行为形成因子作为根节点构建贝叶斯网络,建立其与情景控制模式的不确定关系模型,对管制员在多任务中的人误概率进行预测。研究结果表明:在由相同评判者给出行为形成因子影响效应的前提下,由CREAM扩展预测法和构建贝叶斯网络的方法预测得到的多数任务的人误概率差异较大,从方法的客观性、合理性和适用性角度分析,贝叶斯网络在研究该问题时更具优势。     

山西省绿色转型发展现状评价及路径研究

从经济、社会、资源、环境保护4个层面构建了切合山西省实际情况的绿色转型发展指标体系,采用熵权法及聚类分析方法对山西省的绿色转型发展现状进行了评价,根据评价结果,结合政策背景,提出了山西省实现绿色转型发展的路径,以实现山西省均衡快速的绿色转型发展。     

典型有机磷酸酯阻燃剂分析方法研究进展

有机磷酸酯(OPEs)是一类重要的有机磷阻燃剂,近些年逐渐取代了溴代阻燃剂,广泛应用于各行各业,也因此导致在多种环境介质中有较高的暴露量和潜在风险。已有研究表明,OPEs具有一定的毒理效应,对人体及其他生物均有潜在危害。本文综述了近年来国内外OPEs的检测技术,详述了不同环境介质OPEs的前处理方法。结果表明,目前固相萃取(SPE)和固相微萃取(SPME)仍是水样前处理的主要方法;对于固体样品,加速溶剂萃取/加压液相萃取(ASE/PLE)和微波辅助萃取(MAE)应用较多;虽然大气样品仍以固体吸附剂方式为主,但已向在线一体化方向发展;而生物样品的前处理方法多与水样和固体样品方法相似;但是对于复杂环境介质中OPEs样品的前处理较为困难,方法有待改善;气相色谱-质谱联用(GC-MS)和气相色谱-氮磷检测器(GC-NPD)对弱极性和易挥发的OPEs分析效果好,而强极性和难挥发的OPEs多用液相色谱-质谱联用(LCMS);气相色谱-质谱串联(GC-MS/MS)、液相色谱-质谱串联(LC-MS/MS)和高效液相色谱-质谱串联(UPLC-MS/MS)等对多种复杂的环境介质中的OPEs均有较好的检测分析效果,但并未普及。最后,对OPEs分析测试方法的发展趋势提出了展望。     

Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

Point Sampling Digital Imagery with ‘Samplepoint’

Measuring percent occurrence of objects from digital images can save time and expense relative to conventional field measurements. However, the accuracy of image analysis had, until now, not reached the level of the best conventional field measurements. Additionally, most image-analysis software programs require advanced user training to successfully analyze images. Here we present a new software program, ‘SamplePoint,’ that provides the user a single-pixel sample point and the ability to view and identify the pixel context. We found SamplePoint to allow accuracy comparable with the most accurate field-methods for ground-cover measurements. Expert use of the program requires minimal training and its ease of use allows rapid measurements from image data. We recommend SamplePoint for calibrating the threshold-detection level of image-analysis software or for making direct measurements of percent occurrence from digital images.     

Temperature Effect on Migration of Zn and Cd Through Natural Clay

To investigate the effect of temperature on effective diffusion coefficients and retardation factors for Zn and Cd, combined diffusion and sequential extraction analyses were conducted at 15 ^˚C and 55 ^˚C. The effective diffusion coefficients of the metals increased up to ten times according to the increased temperature. On the other hand, the effect of temperature on the retardation factor depended on the retention mechanisms of the metals. The distribution coefficient for Zn, which was mainly partitioned in the carbonate phase, increased up to two times with the increase in temperature. On the other hand, the distribution coefficient for Cd, which was mainly partitioned in the exchangeable phase, was hardly affected by the temperature change. Results of combined diffusion and sequential extraction analysis showed that the effect of temperature on the heavy metals’ (Zn and Cd) migration through the compacted natural clay was influenced by the combined effects of the diffusion coefficient and the retardation factor. Additionally, we could also observe the change in retention mechanism for the metals with the change in pore water concentration.