Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.     

Quantitative assessment in safety reports of the consequences from the detonation of solid explosives

Safety reports are mandatory documents in member states of European Union whenever any threshold limits of amounts of either stored or processed hazardous substances are exceeded. After a short introduction to EU Seveso Directives on major-accident hazards involving dangerous substances and to the transposition and implementation by member states, with a brief comment on last 2012/18/EU Directive (also known as Seveso III directive), the paper focuses on drafting of safety reports for industrial activities involving solid explosives. Specifically, the quantitative assessment of consequences from detonation is tackled respect to the side-on overpressure and the debris production. Both direct and inverse problems are illustrated to determine respectively the overpressure value at a given distance, and the explosive amount that allows respecting the regulations. Their solution is based on either analytic or numerical techniques and being based on recent scientific publications on the matter either evaluates or zeroes nonlinear algebraic equations. The availability of these equations avoids grounding the consequences assessment on diagrams and nomograms that otherwise would lead to interpretation and usage errors besides avoiding the automatic solution of the inverse problem. The paper focuses also on details such as embankment, crater, munitions, rocket propellant, building structure, and wall material that, at different levels, play a role in the assessment of detonation consequences. A discussion on debris formation, the available literature, and the evaluation of the impact probability of fragments on both fixed and moving targets closes the paper.     

The impact of implementation of the requirements of Standard No. OHSAS 18001:2007 to reduce the number of injuries at work and financial costs in the Republic of Croatia

This article contains the results of research into the impact of implementation of the requirements mentioned in Standard No. OHSAS 18001:2007 to reduce the number of injuries at work and the financial costs incurred in this way. The study was conducted on a determined sample by a written questionnaire survey method in the Republic of Croatia. The objective of the empirical research is to determine the impact of implementation of the requirements of Standard No. OHSAS 18001:2007 to reduce the number of injuries at work and financial costs in Croatia in business organizations that implement these requirements. To provide a broader picture, the research included the collection and analysis of data on the impact of the Standard No. OHSAS 18001:2007 on accidents and fatalities at work. Research findings are based on the analysis of performed statistical data where correlation and regression analysis has been applied.     

Assessment of locomotion behavioral defects induced by acute toxicity from heavy metal exposure in nematode Caenorhabditis elegans

Locomotion behaviors are susceptible to disruption by a broad spectrum of chemicals and environmental stresses. However, no systematic testing of locomotion behavior defects induced by metal exposure has been conducted in the model organism of nematode Caenorhabditis elegans. In this study, the acute toxicity from heavy metal exposure on the locomotion behaviors was analyzed in nematodes. Endpoints of head thrash, body bend, forward turn, backward turn, and Omega/U turn were chosen to evaluate the locomotio...     

Characterization of humic acids extracted from the sediments of the various rivers and lakes in China

The humic acids (HAs) isolated from the sediments of the various rivers,lakes,and reservoirs in China were studied using elemental analyzer,fourier transform infrared (FT-IR),and CP/MAS 13C nuclear magnetic resonance (NMR) spectroscopy.The results showed that the HAs were characterized by some common chemical and physicochemical properties,but they also pose some differences in the C-containing functional groups.The C/N,C/H,O/C,and O/H ratios differ widely for the various HAs,showing that the elemental comp...     

氮沉降对陆地生态系统土壤有机碳含量影响的Meta分析

研究已证实大气氮沉降的增加显著影响了土壤有机碳的含量,然而其变化幅度在不同的实验样地具有较大的差异.基于在我国开展的49个模拟氮沉降野外实验的408组数据,利用Meta分析、Meta回归和线性回归等方法系统研究了样地气候、土壤属性以及氮素施用参数对施氮后土壤有机碳含量的影响.结果表明,样地的年均温（MAT）和年均降水量（MAP）与施氮后土壤有机碳含量变化幅度显著正相关（P<0.05）.在MAT或MAP较低（MAT<3℃,MAP<500 mm）的样地中,施氮后土壤有机碳含量显著下降;而在MAT或MAP较高（MAT>3℃,MAP>500 mm）的样地中,施氮后土壤有机碳含量则显著升高.土壤属性方面,在C：N较高（>15）或酸性（pH<6.5）土壤中,施氮后土壤有机碳积累明显（P<0.05）;而在C：N较低（≤15）以及中性或碱性（pH≥6.5）土壤中,施氮后土壤有机碳变化不明显（P >0.05）.此外,施氮后草原生态系统土壤有机碳含量明显下降（-5.34%）;而湿地生态系统土壤有机碳含量变化不明显;森林生态系统土壤有机碳表现出明显积累（10.52%）,特别是阔叶林生态系统（13.10%）.所有的因子中,土壤C：N是影响施氮后土壤有机碳变化幅度的主导因子.在施氮类型方面,施加硝酸铵或尿素后土壤有机碳含量显著升高,而施加硝态氮对其影响不显著.综上所述,在精确评估、预测和分析氮沉降对土壤有机碳含量的影响时,应综合考虑样地的气候、土壤属性以及氮素施用参数等因素对实验结果的影响.     

Promoting ecological sustainable planning for natural stone quarrying. The case of the Orosei Marble Producing Area in Eastern Sardinia

This paper presents an analysis of the main environmental impact factors (noise, vibration, fumes, dust, vehicle traffic) associated with marble quarrying and processing in the Orosei industrial area and their effects. Solutions are also proposed to prevent, mitigate and, where possible, eliminate the impact on the environment. Using three-dimensional topographic models, the authors simulated quarry and industrial processing development, with projections over the next 10, 30 and 50 years. The aim of these simulations was to establish land management planning guidelines for the optimal and environmentally sustainable development of the Orosei Marble industrial area. Lastly, careful quarry development planning is important both for enhancing LCA and for improving production processes through sustainable technologies that yield green label products meeting environmental performance standards.     

Spatially distributed modeling of the long-term carbon balance of a boreal landscape

Spatially and temporally distributed information on the sizes of biomass carbon (C) pools (BCPs) and soil C pools (SCPs) is vital for improving our understanding of biosphere-atmosphere C fluxes. Because the sizes of C pools result from the integrated effects of primary production, age-effects, changes in climate, atmospheric CO₂ concentration, N deposition, and disturbances, a modeling scheme that interactively considers these processes is important. We used the InTEC model, driven by various spatio-temporal datasets to simulate the long-term C-balance in a boreal landscape in eastern Canada. Our results suggested that in this boreal landscape, mature coniferous stands had stabilized their productivity and fluctuated as a weak C-sink or C-source depending on the interannual variations in hydrometeorological factors. Disturbed deciduous stands were larger C-sinks (NEP₂₀₀₄ = 150 gC m⁻² yr⁻¹) than undisturbed coniferous stands (e.g. NEP₂₀₀₄ = 8 gC m⁻² yr⁻¹). Wetlands had lower NPP but showed temporally consistent C accumulation patterns. The simulated spatio-temporal patterns of BCPs and SCPs were unique and reflected the integrated effects of climate, plant growth and atmospheric chemistry besides the inherent properties of the C pool themselves. The simulated BCPs and SCPs generally compared well with the biometric estimates (BCPs: r = 0.86, SCPs: r = 0.84). The largest BCP biases were found in recently disturbed stands and the largest SCP biases were seen in locations where moss necro-masses were abundant. Reconstructing C pools and C fluxes in the ecosystem in such a spatio-temporal manner could help reduce the uncertainties in our understanding of terrestrial C-cycle.     

Integrating soil carbon cycling with that of nitrogen and phosphorus in the watershed model SWAT: Theory and model testing

In this paper we describe and test a sub-model that integrates the cycling of carbon (C), nitrogen (N) and phosphorus (P) in the Soil Water Assessment Tool (SWAT) watershed model. The core of the sub-model is a multi-layer, one-pool soil organic carbon (S_C) algorithm, in which the decomposition rate of S_C and input rate to S_C (through decomposition and humification of residues) depend on the current size of S_C. The organic N and P fluxes are coupled to that of C and depend on the available mineral N and P, and the C:N and N:P ratios of the decomposing pools. Tillage explicitly affects the soil organic matter turnover rate through tool-specific coefficients. Unlike most models, the turnover of soil organic matter does not follow first order kinetics. Each soil layer has a specific maximum capacity to accumulate C or C saturation (S_x) that depends on texture and controls the turnover rate. It is shown in an analytical solution that S_x is a parameter with major influence in the model C dynamics. Testing with a 65-yr data set from the dryland wheat growing region in Oregon shows that the model adequately simulates the S_C dynamics in the topsoil (top 0.3 m) for three different treatments. Three key model parameters, the optimal decomposition and humification rates and a factor controlling the effect of soil moisture and temperature on the decomposition rate, showed low uncertainty as determined by generalized likelihood uncertainty estimation. Nonetheless, the parameter set that provided accurate simulations in the topsoil tended to overestimate S_C in the subsoil, suggesting that a mechanism that expresses at depth might not be represented in the current sub-model structure. The explicit integration of C, N, and P fluxes allows for a more cohesive simulation of nutrient cycling in the SWAT model. The sub-model has to be tested in forestland and rangeland in addition to agricultural land, and in diverse soils with extreme properties such high or low pH, an organic horizon, or volcanic soils.     

Ecosystems emerging. 5: Constraints

Ecosystem constraints are both ontic and epistemic. They limit activity, and as problems to be solved they drive organization, which is our hypothesis:

The driver of organization is constraint.

Solutions proliferate further constraints in an unending spiral of problem (constraint) generation and solution. As constraints proliferate, behavior narrows, and species diversify to compensate (paradox of constraint). Resource enrichment reduces constraints, releases behavior, and reduction of challenges decreases diversity (paradox of enrichment)—high diversity is expressed in low-resource environments and low diversity in high-resource environments. A three-part model of constraints is formulated for non-living systems, and also for goal-directed, problem-solving biota. Mode 1: dynamical means behavior is co-determined by internal states and external inputs. Mode 2: cybernetic employs negative feedback to keep dynamics within goal-oriented operating limits. Mode 3: model-making entails ability to represent (model) physical reality and respond to both phenomenal (modeled) and physical inputs; this property distinguishes living from nonliving systems. Principal sections of the paper elaborate dynamical constraints (three classes), boundary constraints (expressed in edge effects and trophic dynamics), physical constraints (space, time, temperature), chemical constraints (environment fitness, ecological stoichiometry, chemical evolution, limiting factors), coding constraints (environmental vs. genetic coding), network and pathway constraints (connectivity), and natural selection constraints (fitting to the biosphere). Consideration of how the world would look without constraints suggests how fundamental these are in ecosystem emergence, and how the next property in this series, differentiation, would be unmotivated without them. We conclude that constraints as a category are under-studied in ecology, poorly understood in ecological phenomenology, and (our hypothesis) comprise a ubiquitous organizing force in nature.