基于GIS的可视化土质边坡稳定性分析系统研究

结合GIS空间数据分析能力与极限平衡法开发了可视化的土质边坡稳定性分析系统GiSlope,介绍了边坡几何模型、外荷载与加筋结构模型、滑动面及地下水位线模型等分析模型的可视化建立过程,阐述了计算分析的设定、任意形状滑动面土条条分方法以及计算参数的确定方法。通过对几个典型实例的分析与国内外商业软件计算结果的对比,验证了系统计算的正确性和可靠性。     

建筑抗震设计地震作用折减系数的取值方法

地震作用折减系数在建筑抗震设计中是政策性、技术性和经济性的综合指标。本文以钢筋混凝土框架结构为例,从技术上介绍了地震作用折减系数的确定原则。在简要介绍我国建筑抗震设计规范设计地震作用—延性等级组合运用中存在不足的基础上,论述了地震作用折减系数三个分量的基本特点,并分四个步骤介绍了其计算取值方法。推荐方法可为建筑抗震设计确定合理的地震作用折减系数提供有益的参考。     

有机溶剂中温法溶出光伏组件封装材料乙烯-醋酸乙烯酯

采用有机溶剂邻二氯苯中温法溶出模拟光伏组件的封装材料乙烯-醋酸乙烯酯(EVA),探究了不同条件下EVA的溶出率及模拟组件的分离率,通过正交实验确定了有机溶剂中温法处理EVA的最佳条件.实验结果表明,在反应温度160℃、固液比(光伏组件个数与邻二氯苯体积之比,个/mL)4:100、搅拌转速800 r/min、反应时间24...     

水环境质量评价3种方法的应用对比

从众多水质评价方法中选取单项指数法、加权均值型指数法、模糊数学法进行介绍,并通过运用这3种方法对大汶河某年监测数据的平均值进行评价.经对比分析发现,加权均值型指数法是一种比较实用的水质评价方法,模糊数学法可以作为必要的补充.     

基于无人机多传感吊舱系统的火点实时定位方法

林火定位是林火智能监测设备的核心技术。提出了一种基于激光雷达、红外热像仪及组合惯导多数据融合的火点定位方法。首先设计了一个通用的无人机吊舱系统,并基于ROS框架实现数据采集、数据处理和数据传输等功能;其次提出了一个基于无人机吊舱系统的火点全局定位方案,根据红外热像仪成像特性识别火点,同时将密集点云与红外图像进行数据融合,估计出火点的三维空间位置;然后根据无人机位姿提出了一种基于墨卡托投影的火点全局定位方案,得到了火点的GPS位置。最后通过试验得到了该方案的全局定位精度：在实验中经度最大误差为2.36×10^-5°,纬度最大误差为1.84×10^-5°,高程最大误差为0.926 1 m,为其他林火定位方案提供了技术支持。     

Improvement of an efficient separation method for chemicals in diesel exhaust particles: analysis for nitrophenols

GOAL, SCOPE, AND BACKGROUND: Diesel exhaust is believed to consist of thousands of organic constituents and is a major cause of urban pollution. We recently reported that a systematic separation procedure involving successive solvent extractions, followed by repeated column chromatography, resulted in the isolation of vasodilatory active nitrophenols. These findings indicated that the estimation of the amount of nitrophenols in the environment is important to evaluate their effect on human health. The isolation procedure, however, involved successive solvent extractions followed by tedious, repeated chromatography, resulting in poor fractionation and in a significant loss of accuracy and reliability. Therefore, it was crucial to develop an alternative, efficient, and reliable analytical method. Here, we describe a facile and efficient acid-base extraction procedure for the analysis of nitrophenols. MATERIALS AND METHODS: Diesel exhaust particles (DEP) were collected from the exhaust of a 4JB1-type engine (ISUZU Automobile Co., Tokyo, Japan). Gas chromatography-mass spectrometry (GC-MS) analysis was performed with a GCMS-QP2010 instrument (Shimadzu, Kyoto, Japan). RESULTS: A solution of DEP in 1-butanol was extracted with aqueous NaOH to afford a nitrophenol-rich oily extract. The resulting oil was methylated with trimethylsilyldiazomethane and subsequently subjected to GC-MS analysis, revealing that 4-nitrophenol, 3-methyl-4-nitrophenol, 2-methyl-4-nitrophenol, and 4-nitro-3-phenylphenol were present in significantly higher concentrations than those reported previously. DISCUSSION: Simple acid-base extraction followed by the direct analysis of the resulting extract by GC-MS gave only broad peaks of nitrophenols with a poor detection limit, while the GC-MS analysis of the sample pretreated with (trimethylsilyl)diazomethane gave satisfactorily clear chromatograms with sharp peaks and with a significantly lowered detection limit (0.5 ng/ml, approximately 100 times). CONCLUSION: The present method involving an acid-base extraction, in situ derivatization, and GC-MS analysis has shown to be a simple, efficient, and reliable method for the isolation and identification of the chemical substances in DEP.     

碱熔融法合成NaA和NaX型粉煤灰沸石的品质表征

以粉煤灰为原料采用碱熔融法合成了2种单一沸石矿物种的NaA和NaX型沸石,并对产物的结构、性能和应用指标进行了详细表征.经x射线衍射和IR光谱分析,表明合成产物是无杂晶生成的NaA和NaX型沸石相;在扫描电镜观察下,产物分别具有NaA和NaX型沸石的立方体和八面体晶体骨架结构.DTA分析表明了合成产物中沸石水的存在,且产物热稳定性较好.通过对比,粉煤灰合成的NaA和NaX型沸石的比表面积达到了相应商品沸石的66.9%和83.6%;孔容为41.1%和70.2%;阳离子交换容量(CEC,cation exchange capacity)为82.93%和84.31%.通过比较化学组成表明,大规模应用合成产物不会对环境造成危害.     

Extended geometric method: a simple approach to derive adsorption rate constants of Langmuir-Freundlich kinetics

A new and simple equation has been presented here for calculation of adsorption and desorption rate constants of Langmuir-Freundlich kinetic equation. The derivation of new equation is on the basis of extension and correction to the geometric method which has been presented by Kuan et al. [Kuan, W.-H., Lo, S.-L., Chang, C.M., Wang, M.K., 2000. A geometric approach to determine adsorption and desorption kinetic constants. Chemosphere 41, 1741-1747] for the kinetics of adsorption/desorption in aqueous solutions. The correction is to consider that the concentration of solute is not constant and changes as adsorption proceeds. The extension is that we applied Langmuir-Freundlich kinetic model instead of Langmuir kinetic model to consider the heterogeneity and therefore it is more applicable to the real systems. For solving Langmuir-Freundlich kinetic model, some geometric methods and also Taylor expansion were used and finally a simple and novel equation was derived (Eq. (20)) for calculation of adsorption rate constant. This new method was named "extended geometric method". The input data of the obtained equation can be simply derived from initial data of adsorption kinetics. Finally the adsorption of methyl orange onto granular activated carbon was carried out at dynamic and equilibrium conditions and the capabilities of extended geometric method were examined by the experimental data.     

双碱法脱硫技术研究

脱硫过程主要是二氧经硫与氢氧化钠生发化学反应,反应生成物亚硫酸钠溶于水,含亚硫酸钠的脱硫循环水与投加的氢氧化钙反应可生成氢氧化钠和亚硫酸钙。通过沉淀分离可将难溶钙从循环水中清除,氢氧化钠易溶于水可循环使用,脱硫过程中消耗氢氧化钙。达到脱硫效率高,运行费用低的目的。     

从顽拗植物荔枝中提取基因组DNA技术的研究

针对荔枝体内含有大量影响ＤＮＡ提取质量的多酚等次生代谢物质的特点,在常规ＳＤＳ和ＣＴＡＢ提取方法的基础上做了技术改进,即在核裂解之间先破碎细胞,将存在于细胞质中次生物质除去后再裂解细胞核,同时加入活性炭以吸咐杂质反复清洗几次后加入核型解液释放基因组ＤＮＡ,纯化之后经外观和电泳检测,以及Ｄ２６０ｎｍ和Ｄ２８０ｎｍ比值的测定,限制性内切酶反应,ＰＣＲ扩增的结果表明,用改进方法提取的ＤＮＡ无论在纯度上还