聚合氯化铁-聚(环氧氯丙烷-二甲胺)复合絮凝剂在模拟水处理中的混凝特性研究

制备出一系列具有不同聚合氯化铁(PFC)的碱化度(B)、不同聚(环氧氯丙烷-二甲胺)[P(EPI-DMA)]质量分数[ω(E)]和黏度(η)的PFC-P(EPI-DMA)复合混凝剂,并将其用于模拟染料废水和模拟天然地表水的絮凝脱色处理,对比探讨了ω(E)、η和B对PFC-P(EPI-DMA)中铁的形态分布及其混凝效果的影响,以及混凝作用机制.结果表明,复合絮凝剂中铁的有效形态含量随ω(E)的增大而不断降低;η=850 mPa.s时,复合混凝剂中铁的有效形态含量最高;随B值的增大,Feb含量先增大后减少,而Fec含量逐渐增大.一定程度上使用预水解程度较低、有机成分黏度较大的PFC-P(EPI-DMA)有利于混凝效果的提高,复合混凝剂中有机成分质量分数对混凝效果的影响则与处理对象有关.在模拟水处理中,复合混凝剂依靠电性中和及架桥吸附能力发挥混凝特性.     

基于多区域投入产出(MRIO)的中国区域居民消费碳足迹分析

近年来,居民消费活动和环境的关系逐渐受到关注,而与温室气体排放相关的研究更是其中的热点.因此,本文采用“居民消费碳足迹”概念来定义特定居民消费活动所导致的直接和间接温室气体排放的总和,主要包括CO2、CH4、N2O3种温室气体;构建了基于环境扩展的多区域投入产出(Multiregional input-output,MRIO)模型的碳足迹核算方法,并以2007年中国8个区域为例对其居民消费碳足迹的数量、构成、分布及转移进行了分析.结果显示,2007年全国居民消费碳足迹总量达到31.74亿t(以CO2当量计).此外,碳足迹还呈现出区域差异明显、间接排放大于直接排放、城乡差距过大等特征.人均碳足迹方面,发展水平较高的京津、东部沿海地区明显高于相对滞后的西北、西南区域.研究还对碳足迹的区域分布和转移进行了深入探讨.结果发现,东北、京津、西北和西南区域转移收支为负,表示这些区域为其他区域承担的排放大于其他区域为其承担的排放;剩余的北部沿海、东部沿海、南部沿海和中部区域情况则正好相反.这些结果对现阶段中国制定具体区域消费政策或分配碳减排责任等具有参考价值;本研究的方法论也适用于研究其他环境因子及足迹因子与居民消费的关系.     

垦殖对湿地土壤有机碳垂直分布及可溶性有机碳截留的影响

通过测定和计算兴凯湖地区沼泽湿地及由其垦殖而来的旱田和水田土壤剖面有机碳含量和密度及土壤剖面不同深度土壤溶液中可溶性有机碳含量,分析了垦殖对兴凯湖周边沼泽湿地土壤有机碳垂直分布及土壤剖面截留可溶性有机碳的影响.结果表明,垦殖显著影响湿地0～40 cm土壤有机碳含量,大豆田和水稻田0～10、10～20、20～30、30～40 cm土壤有机碳含量与湿地相比分别降低了79.07%和82.01%、79.01%和82.28%、79.86%和92.90%、37.49%和78.05%;40 cm以下土层土壤有机碳含量垦殖前后差异不显著.大豆田和水稻田有机碳密度相比沼泽湿地分别降低了25.50%和47.35%,但三者1 m深土壤中大部分的有机碳均是储存在0～50 cm土层中.垦殖前后土壤有机碳含量与深度之间的关系均可用指数函数来描述,垦殖改变了土壤有机碳含量但并未改变其随土壤深度的变化规律.垦殖为大豆田土壤剖面对可溶性有机碳的截留效果较湿地和水稻田更明显,沼泽湿地和水稻田对可溶性有机碳的截留效果大致相当.     

Adsorption of lead on multi-walled carbon nanotubes with different outer diameters and oxygen contents: Kinetics, isotherms and thermodynamics

The effects of different outer diameters and surface oxygen contents on the adsorption of heavy metals onto six types of multi-walled carbon nanotubes (MWCNTs) were investigated in an aqueous solution and lead was chosen as a model metal ion. The results indicated that the percentage removal and adsorption capacity of lead remarkably increased with decreasing outer diameter due to larger specific surface area (SSA). The SSA-normalized maximum adsorption capacity (qm /SSA) and SSA-normalized adsorption coefficient (Kd /SSA) were strongly positively correlated with surface oxygen content, implying that lead adsorption onto MWCNTs significantly increases with the rise of oxygen content and decreases with decreasing SSA. The calculated thermodynamic parameters indicated that adsorption of lead on MWCNTs was endothermic and spontaneous. When the oxygen content of MWCNTs increased from 2.0% to 5.9%, the standard free energy (△ G0 ) became more negative, which implied that the oxygenated functional groups increased the adsorption affinity of MWCNTs for lead. Through calculation of enthalpy (△ H0 ), G0 and free energy of adsorption (Ea ), lead adsorption onto MWCNTs was recognized as a chemisorption process. The chemical interaction between lead and the phenolic groups of MWCNTs could be one of the main adsorption mechanisms due to highly positive correlations between the phenolic groups and K d /SSA or q m /SSA.     

Influences of perfluorooctanoic acid on the aggregation of multi-walled carbon nanotubes

The aggregation of multi-walled carbon nanotubes (MWCNTs) in the aqueous phase not only inhibits their extensive utilization in various aspects but also dominates their environmental fate and transport.The role of surfactants at low concentration in the aggregation of MWCNTs has been studied,however the effect of perfluorinated surfactants at low concentration is uncertain.To understand this interfacial phenomenon,the influences of perfluorooctanoic acid (PFOA),and sodium dodecyl sulfate (SDS) as a control,on MWCNT aggregation in the aqueous phase were examined by the UV absorbency method.Influences of pH and cationic species on the critical coagulation concentration (CCC) value were evaluated.The CCC values were dependent on the concentration of PFOA,however a pronounced effect of SDS concentration on the CCC values was not observed.The CCC values of the MWCNTs were 51.6 mmol/L in NaCl and 0.28 mmol/L in CaCl 2 solutions,which suggested pronounced differences in the effects of Na+ and Ca2+ ions on the aggregation of the MWCNTs.The presence of both PFOA and SDS significantly decreased the CCC values of the MWCNTs in NaCl solution.The aggregation of the MWCNTs took place under acidic conditions and was not notably altered under neutral and alkaline conditions due to the electrostatic repulsion of deprotonated functional groups on the surface of the MWCNTs.     

Competitive sorption between 17α-ethinyl estradiol and bisphenol A/4-n-nonylphenol by soils

The sorption of 17α-ethinyl estradiol(EE2),bisphenol A(BPA),and 4-n-nonylphenol(NP) in single systems and the sorption of EE2 with different initial aqueous concentrations of BPA or NP were examined using three soils.Results showed that all sorption isotherms were nonlinear and fit the Freundlich model.The degree of nonlinearity was in the order BPA(0.537-0.686) > EE2(0.705-0.858) > NP(0.875-0.0.951) in single systems.The isotherm linearity index of EE2 sorption calculated by the Freundlich model for Loam,Silt Loam and Silt increased from 0.758,0.705 and 0.858,to 0.889,0.910 and 0.969,respectively,when BPA concentration increased from 0 to 1000 μg/L,but the effect of NP was comparably minimal.Additionally,EE2 significantly suppressed the sorption of BPA,but insignificantly suppressed that of NP.These findings can be attributed to the difference of sorption affinity of EE2,NP and BPA on the hard carbon(e.g.,black carbon) of soil organic matter that dominated the sorption in the low equilibrium aqueous concentration range of endocrine-disrupting chemicals(EDCs).Competitive sorption among EDCs presents new challenges for predicting the transport and fate of EDCs under the influence of co-solutes.     

Iron and lead ion adsorption by microbial flocculants in synthetic wastewater and their related carbonate formation

Although microbial treatments of heavy metal ions in wastewater have been studied, the removal of these metals through incorporation into carbonate minerals has rarely been reported. To investigate the removal of Fe^3＋ and Pb^2＋, two representative metals in wastewater, through the precipitation of carbonate minerals by a microbial flocculant （MBF） produced by Bacillus mucilaginosus. MBF was added to synthetic wastewater containing different Fe^3＋ and Pb^2＋ concentrations, and the extent of flocculation was analyzed. CO2 was bubbled into the mixture of MBF and Fe^3＋/Pb^2＋ to initiate the reaction. The solid substrates were analyzed via X-ray diffraction, transmission electron microscopy and energy dispersive spectroscopy. The results showed that the removal efficiency decreased and the MBF adsorption capacity for metals increased with increasing heavy metal concentration. In the system containing MBF, metals （Fe^3＋ and Pb^2＋）, and CO2, the concentrated metals adsorbed onto the MBF combined with the dissolved CO2, resulting in oversaturation of metal carbonate minerals to form iron carbonate and lead carbonates. These results may be used in designing a method in which microbes can be utilized to combine CO2 with wastewater heavy metals to form carbonates, with the aim of mitigating environmental problems.     

Photocatalytic degradation of carbofuran in TiO2 aqueous solution：Kinetics using design of experiments and mechanism by HPLC/MS/MS

The photocatalytic degradation kinetics of carbofuran was optimized by central composite design based on response surface methodology for the first time. Three variables, TiO2 concentration, initial pH value and the concentration of carbofuran, were selected to determine the dependence of degradation efficiencies on independent variables. Response surface methodology modeling results indicated that the degradation efficiency of carbofuran was highly affected by the initial pH value and the concentration of carbofuran. Then nine degradation intermediates were detected by HPLC/MS/MS. The Frontier Electron Densities of carbofuran were calculated to predict the active sites on carbofuran attacked by hydroxyl radicals and photoholes. Point charges were used to elucidate the chemisorption pattern on TiO2 catalysts during the photocatalytic process. By combining the experimental results and calculation data, the photocatalytic degradation pathways of carbofuran were proposed, including the addition of hydroxyl radicals and the cleavage of the carbamate side chain.     

日本交通部门碳排放与低碳交通相关因素研究

本文就日本向低碳社会体系转型的过程中,交通部门碳排放现状、都市交通体系构成、实施对策等方面进行了分析,探讨其交通运输领域低碳交通的相关因素及发展模式,为中国低碳交通体系的构建提供参考。     

活化温度对SCAC制备过程中副产物生成规律的影响

文章研究了污泥-玉米芯活性炭(SCAC)制备过程中,活化温度对副产物(热解气和热解油)生成规律的影响。热解气和热解油分别采用气相色谱仪和气质联用仪进行分析检测。试验结果表明,随着活化温度的升高,SCAC的产量逐渐降低,热解气与热解油的产量则随之增多。不同温度条件下,热解气的主要成分均为H2和CO2,热解气中H2所占的体积百分数随着活化温度的升高而增加,而CO2则相应降低。此外,热解气中CH4的含量也会随着活化温度的上升而略有提高,说明较高的活化温度更有利于热解气的资源利用。热解油组分较为复杂,每个温度条件下的液态产物都包括上百种化合物,可分为烷烃,烯烃,苯类,酚类,腈类,杂环化合物,多环芳烃,有机酸,酰胺,酯类,甾体,醇,酮以及其他类共14大类型,其中以有机酸、腈类和甾体类有机物含量居多。随着活化温度的升高,有机酸和多环芳烃的含量有所增加,而酚类化合物的含量则有所降低;当活化温度升高至650℃以上时,甾体类有机物含量明显降低。