Nitrogen cycle of a typical Suaeda salsa marsh ecosystem in the Yellow River estuary

The nitrogen (N) biological cycle of the Suaeda salsa marsh ecosystem in the Yellow River estuary was studied during 2008 to 2009. Results showed that soil N had significant seasonal fluctuations and vertical distribution. The N/P ratio (15.73±1.77) of S. salsa was less than 16, indicating that plant growth was limited by both N and P. The N absorption coefficient of S. salsa was very low (0.007), while the N utilization and cycle coefficients were high (0.824 and 0.331, respectively). The N turnover among compartments of S. salsa marsh showed that N uptake from aboveground parts and roots were 2.539 and 0.622 g/m2, respectively. The N translocation from aboveground parts to roots and from roots to soil were 2.042 and 0.076 g/m2, respectively. The N translocation from aboveground living bodies to litter was 0.497 g/m2, the annual N return from litter to soil was far less than 0.368 g/m2, and the net N mineralization in topsoil during the growing season was 0.033 g/m2. N was an important limiting factor in S. salsa marsh, and the ecosystem was classified as unstable and vulnerable. S. salsa was seemingly well adapted to the low-nutrient status and vulnerable habitat, and the nutrient enrichment due to N import from the Yellow River estuary would be a potential threat to the S. salsa marsh. Excessive nutrient loading might favor invasive species and induce severe long-term degradation of the ecosystem if human intervention measures were not taken. The N quantitative relationships determined in our study might provide a scientific basis for the establishment of effective measures.     

开放源类物料中微粒子排放估算模型的建立

利用实验室微粒子控制模拟试验装置,采用开放源类粉体物料自由下落溢出随机粉尘的实验研究方法,研究了济南市开放源类粉体物料自由下落过程中微粒子排放规律;在一定动力因素条件下,探讨了物料种类、粒度组成,物料含水率,环境空气湿度,自由下落中质量流量等因素对物料排放率的影响;通过数学归纳和模型化处理,建立了开放源类粉体物料自由下落过程中大气微粒子排放估算的数学模型;通过对实验数据进行回归分析后认为,粒径、含水率是对排放率影响最大的因素,质量流量是对排放率影响最小的因素。经试验验证,计算值与试验值基本一致。所获结论,对开放源类物料在转运、装卸、堆放等操作过程中大气微粒子的排放估算和综合防治具有重要的参考价值。     

Fenton氧化在废水处理中的应用

综述了近年来Fenton氧化在废水处理领域的应用状况,对Fenton试剂氧化的机理和主要影响因素:温度、pH、反应时间、H2O2和Fe2+的投加量、H2O2/Fe2+量比以及反应动力学模型进行了简要介绍.最后探讨了Fenton氧化技术在废水处理领域现存不足之处及今后的发展趋势.     

沈阳市生活垃圾排放现状及产生量预测

随着城市化进程加快、人口数量快速增加及人民生活水平普遍提高,城市生活垃圾管理已成为世界各国,特别是发展中国家城市面临的主要挑战.作为中国东北最大的中心城市,沈阳正面临城市生活垃圾产生量急剧增加的现状.文章通过对沈阳市城市生活垃圾排放现状的分析,发现2002年后沈阳市生活垃圾产生量和清运量逐年增加,生活垃圾成分变化显著....     

石羊河流域1959年至2008年风速变化特征分析

利用线性拟合、Mann—Kendall方法、小波分析对石羊河流域五个测站空间平均的近50年来的逐日风速资料进行了倾向、周期、突变等特性分析。研究结果表明：1959年至2008年间,整个石羊河流域风速呈减小趋势,变化率约为-0．004m／（s．a）．而上游风速呈现明显的上升趋势。四个季节中冬季风速降低速度最大,而夏季风速呈现上升趋势。风速的长期变化还具有一定的突变性,年平均风速在1988年出现了由高到低的突变,表明风速开始下降。复值Morlet小波分析的结果显示,风速变化存在6a、13a、19a、25a四个峰值。其中19a的时间尺度为第一主周期。     

环境管理过程中对锅炉型号的识别

通过对锅炉型号的简要介绍,提高对锅炉的认识,增强在污染源动态更新调查表的填报过程中锅炉技术指标的填报能力是十分必要的。     

FRP加固震损RC柱建模方法及骨架模型研究

为研究震损RC柱采用FRP(Fiber Reinforced Polymer,FRP)加固修复后的抗震性能,本文基于OpenSees仿真平台,根据震后RC柱的表观损伤状态提出FRP加固震损RC柱的有限元模型建立方法。对FRP加固震损RC柱进行5120种工况的Pushover分析,采用三折线荷载-位移骨架曲线,研究损伤状态对骨架曲线特征点参数的影响规律,并通过数据回归分析提出FRP加固震损RC柱的骨架曲线计算模型。分析结果表明:损伤会降低FRP加固RC柱的承载力及刚度,且降低程度随损伤指数的增大而增加,两者近似成抛物线关系;在DS-5损伤状态下,相比于FRP加固完好RC柱,FRP加固震损RC柱的屈服承载力P y、峰值承载力P c、弹性刚度K 1、弹塑性刚度K 2及下降段刚度K 3的均值下降17.9%、14.5%、41.8%、43.1%和19.9%;损伤对FRP加固RC柱弹性刚度和弹塑性刚度的降低程度明显高于屈服承载力和峰值承载力;文中提出的FRP加固震损RC柱骨架曲线计算模型具有较高精度。     

Evaluation of accuracy of linear regression models in predicting urban stormwater discharge characteristics

Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days （ADD）, have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency＇s Storm Water Management Model （SWMM）. The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid （TSS） discharge loads and event mean concentrations （EMC） were extracted. From these data, linear regression models were developed. R2 and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data.     

AERMOD与估算模式在环境影响评价中的应用与比较

采用AERMOD和估算模式两种预测模式对同一生活垃圾填埋场进行了预测。比较两种预测结果可以看出,在污染源、预测范围、运行周期相同的情况下,敏感点处的落地浓度均与排放源强呈正比,与距离呈反比。预测结果同时说明,估算模式是一种保守的预测模式,其预测结果比AERMOD模式大,可作为进一步预测模式的有效补充。     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.