分离岛式地铁站可用安全疏散时间计算与比较分析*

为研究大客流地铁车站风险因素,提出车站疏散能力分析的基本要素,结合某分离岛式地下车站,采用规范计算及精细网格模型对可用安全疏散时间进行计算与比较分析。结果表明:楼扶梯的通过效率、车站结构形式、疏散人员的数量及分布情况等因素对仿真模拟的结果产生影响;《地铁安全疏散规范》（GB/T 33668—2017）综合考虑了疏散至楼扶梯入口时间、楼扶梯上平均滞留时间及通道非均匀性偏差时间等,与仿真模拟结果的吻合度较高。研究结果可为国内类似车站的安全疏散设计及运营疏散组织提供参考。     

屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果,需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试,探究人体在不同环境温度下体表温度的变化,得出胸部、背部及额头为热量最高部位,并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型,对不同环境中的屏蔽服冷却效果展开研究,分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇,均可帮助人体降低体温,提高舒适度。     

瓦斯抽采PC-CAS基封孔材料优化及其膨胀作用分析*

为了研制以硅酸盐/铝酸盐水泥、生石灰、生石膏为主的PC-CAS基封孔材料,采用正交试验优化材料配比、开展膨胀力研究,并用扫描电镜观测料-煤胶结形貌。研究结果表明:材料的最优配比为A2B2C4,其具备优良的流动性、强度及致密性,造浆量达2 100 mL/kg;PC-CAS基材料具有显著的膨胀性,其膨胀力随时间先增大而后趋于稳定,并且该膨胀力随着径向约束的提高而增大;相比于FP材料,PC-CAS基材料产生的膨胀力能够显著降低材料-煤岩界面的空隙并在一定程度上压密煤体内部的裂隙;该材料产生的膨胀力可压密封孔段围岩、提高封孔质量,并为后期“二次注浆”提供保压条件。工业试验结果表明,采用PC-CAS基材料进行封孔可显著改善抽采效果,将原有平均浓度10.11%提升至20.08%。     

波浪与抛石潜堤相互作用的MPS法数值模型研究

为了研究波浪与抛石潜堤相互作用过程中大自由表面变形和堤内渗流等强非线性紊流运动问题,利用改进的MPS法,建立了模拟波浪与抛石潜堤相互作用的MPS法数值计算模型。模型将抛石潜堤假定为均质多孔介质,采用Drew的二相流运动方程描述多孔介质内外的流体运动;通过在动量方程中增加非线性阻力项,并引入亚粒子尺度紊流模型,模拟波浪与可渗结构物相互作用过程中的紊流运动。选取“U”型管中多孔介质内渗流过程和孤立波与可渗潜堤相互作用两个典型的渗流问题,通过将数值计算结果与理论解和实测值的对比分析,对所提出的MPS法紊流渗流模型的模拟精度进行验证。结果表明：基于改进的MPS法构建的垂向二维紊流渗流模型可以很好地再现 “U”型管中多孔介质内渗流以及波浪作用下可渗潜堤内外的复杂流场,显著缓解流-固界面处的压力震荡与粒子分布不均匀问题,实现了较高的模拟精度。     

Explosion suppression of porous materials in a pipe-connected spherical vessel

To study the suppression of different porous materials on the explosion of combustible gas, some experiments were implemented. The porous materials were categorized into three kinds, including six subcategories, and the explosion suppression characteristics of the thin iron hoop, one-layer porous materials, two-layer composite porous materials, and three-layer composite porous materials were studied and analyzed. The results show that a rarefaction wave appears in the spherical vessel during the rapid development stage of combustion explosion. Further, the thin iron hoop could enhance the gas explosion intensity. And the explosion intensity suppression effect of the porous materials is obvious, the best effects of one-layer, two-layer and three-layer porous materials are from Fe–Ni 10 mm/40 PPI, Fe–Ni 10 mm/90 PPI + Al₂O₃ 10 mm/30 PPI, and Al₂O₃ 10 mm/50 PPI + Fe–Ni 10 mm/40 PPI + SiC 20 mm/20 PPI, respectively. According to the surface morphology of the porous materials, the anti-sintering ability of the three categories of porous materials follows the order of Al₂O₃ > SiC > Fe–Ni. Besides, the thickness and pore size of the combined porous material was changed, which has a great influence on the explosion pressure and the explosion intensity.     

密相塔烟气脱硫技术试验研究

建立了密相塔烟气脱硫试验装置,并对烧结烟气进行了脱硫试验研究,验证了该工艺的可行性,并研究了主要因素对脱硫效率的影响.结果表明,钙硫比和近绝热饱和温度(approach to adiabatic saturation temperature,AAST)是影响脱硫效率的显著因素,循环灰浓度是保证系统脱硫效率的关键因素.在Ca/S比为1.2、密相塔出口烟气AAST=15℃、循环灰浓度为400g/m3条件下,系统能连续稳定运行,脱硫效率达92.5%以上,系统出口烟气中SO2浓度在150 mg/Nm3以下.     

Reducing the Effects of Dredged Material Levees on Coastal Marsh Function: Sediment Deposition and Nekton Utilization

Dredged material levees in coastal Louisiana are normally associated with pipeline canals or, more frequently, canals dredged through the wetlands to allow access to drilling locations for mineral extraction. The hydrologic impact on marshes behind the levee is of concern to coastal resource managers because of the potential impact on sediment transport and deposition, and the effect on estuarine organism access to valuable nursery habitat. This study examined the effects of gaps in dredged material levees, compared to continuous levees and natural channel banks, on these two aspects of marsh function. Field studies for sediment deposition were conducted biweekly for a year, and nekton samples were collected in spring and fall. Variation in nekton density among study arears and landscape types was great in part because of the inherent sampling gear issues and in part because of differences in characteristics among areas. Nekton densities were generally greater in natural compared to leveed and gapped landscapes. Differences in landscape type did not explain patterns in sediment deposition. The gaps examined appear to be too restrictive of marsh flooding to provide efficient movements of floodwaters onto the marsh during moderate flooding events. The “trapping” effect of the levees increases sediment deposition during extreme events. Gapping material levees may be an effective method of partially restoring upper marsh connection to nekton, but this method may work best in lower elevation marshes where nekton use is greater.     

利用等离子技术治理再生纤维汽车内衬生产过程中的烟气

利用等离子技术,治理树脂聚合法生产再生纤维汽车内饰材料过程中产生的烟气,对等离子净化装置的结构参数、操作参数进行了优化,并对等离子体净化机理进行了分析。利用等离子技术,能够处理常规工艺设备无法治理的极微细可吸入颗粒物和气溶胶烟气;并可同时净化可吸入颗粒物和气态污染物。该设备结构简单、运行费用极低,可在产生烟气的很多行业和领域推广应用。     

某市给水管网中铁释放现象影响因素与控制对策分析

针对某市管网水中铁浓度的变化规律进行了系统的研究,确定了管垢向管网水中释放出的铁是管网水中铁超标的主要原因.研究中发现铸铁管和镀锌钢管中管垢的主要化学组分为铁.在给水管网中,管网水的溶解氧和余氯浓度低时,对应的管网水中铁释放现象严重,其原因是还原条件使管垢表面的致密钝化层被破坏,造成二价铁的大量释放.根据试验结果提出了给水管网中铁释放和“红水”现象的控制对策.     

滇池流域磷循环系统的物质流分析

研究营养元素在社会经济系统中的物质代谢结构及特征,是有效预防和控制地表水体富营养化的关键性分析技术之一.以滇池流域磷循环为研究案例,运用物质流分析方法建立了2000年流域静态物质流模型(PHOSFAD),并在此基础上识别出流域磷循环系统的总体结构特征,以及资源开采、化工生产、农业种植、畜禽养殖、居民生活等生产和消费部门的物质利用效率特征,为科学防治滇池水体富营养化提供了重要决策依据和参考.