适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注。处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点。Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果。     

电絮凝去除废水中多种重金属影响因素研究

目的以铁作为电极,研究电絮凝法处理含多种重金属废水的影响因素及效果。方法通过控制pH、停留时间、电流密度、电导率、废水初始浓度等因素至不同水平,考察处理效果、能耗及极板消耗的变化。结果随着停留时间、pH值及电流密度的升高,处理效果越好,但升高至一定程度后,处理效果提升并不明显;电导率对处理效果影响并不显著,但过低的电导率会增加能耗;废水初始浓度越高,要达到处理目标所需的能耗及极板消耗均越高。结论当pH为8.5~9.0、进水电导率为1500~2000μs/cm、停留时间为3~4 min、废水初始质量浓度20 mg/L、电流密度为13.2~19.8 A/m2时,处理效果最理想,对总铜、总镍、总铅、总锌、总镉及总铬的去除率达到99%以上,且能耗与极板消耗均为最低,电絮凝法更适合于重金属废水的深度处理。     

纸板碳化电极提高生物电化学系统产电效率微生物机理研究

采用Solexa高通量测序技术和蛋白定量方法,分析了碳化纤维素纸板制备的层状波纹碳(LCC)电极与石墨板(GP)电极在生物电化学系统运行过程形成的生物膜微生物群落结构和生物量差异.结果表明,LCC电极良好的生物电化学性能不仅取决于其良好的导电性能,还与其表面生物膜微生物群落结构有关;LCC电极表面生物膜微生物量高,且对产电微生物的富集效果好.LCC电极与GP电极表面生物膜分别得到16S rRNA基因V3区优化序列12643条和12837条,经97%相似度归并后获得的OTUs数量分别为2786和3130;α多样性分析显示,GP电极生物膜微生物多样性相对更丰富.Proteobacteria、Firmicutes和Bacteroidetes在两种电极生物膜中含量最为丰富,这3个门细菌序列数分别占总序列数的76%(LCC)和85%(GP).在属分类水平上,LCC电极生物膜由383个属的细菌构成,而GP电极生物膜则有456个属.深入分析电极生物膜微生物群落结构有助于进一步认识LCC电极提高生物电化学系统产电效率的机理.     

ZnO-PMMA复合材料光催化去除水中低浓度氨氮

通过水热法制备纳米ZnO,采用热粘固法成功地将其负载于聚甲基丙烯酸甲酯(PMMA)微球表面,并对ZnO-PMMA复合材料光催化去除水中低浓度氨氮的能力进行了考察.同时,探究了负载比例、初始氨氮浓度、催化剂浓度和pH对低浓度氨氮去除效率的影响.实验结果显示,PMMA改善了纳米ZnO的分散性和光催化能力,ZnO-PMMA能够有效地催化去除氨氮废水.在汞灯照射下,当pH=12、温度为30℃时,1 g·L~(-1)的催化剂(ZnO-PMMA)对50 mg·L~(-1)的氨氮废水去除率达到66%,且反应产物硝氮和亚硝氮含量较低,体现了该催化剂具有将氨氮转化为N2的良好的光催化降解能力.同时,纳米材料可以简单方便地回收,减轻了对环境的潜在影响,符合绿色化学的原则.     

Fate of cancerostatic platinum compounds in biological wastewater treatment of hospital effluents

The present work focuses on the fate of two cancerostatic platinum compounds (CPC), cisplatin and carboplatin, as well as of two inorganic platinum compounds, [PtCl₄]²⁻ and [PtCl₆]²⁻ in biological wastewater treatment. Laboratory experiments modelling adsorption of these compounds onto activated sludge showed promising specific adsorption coefficients K_D and K_OC and Freundlich adsorption isotherms. However, the adsorption properties of the investigated substances were differing significantly. Adsorption decreased following the order cisplatin > [PtCl₆]²⁻ > [PtCl₄]²⁻ > carboplatin. Log K_D-values were ranging from 2.5 to 4.3 , log K_OC from 3.0 to 4.7.

A pilot membrane bioreactor system (MBR) was installed in a hospital in Vienna and fed with wastewater from the oncologic in-patient treatment ward to investigate CPC-adsorption in a sewage treatment plant. During three monitoring periods Pt-concentrations were measured in the influent (3–250 μg l⁻¹ Pt) and the effluent (2–150 μg l⁻¹ Pt) of the treatment plant using ICP-MS. The monitoring periods (duration 30 d) revealed elimination efficiencies between 51% and 63% based on averaged weekly input–output budgets. The derived log K_D-values and log K_OC-values ranged from 2.4 to 4.8 and from 2.8 to 5.3, respectively. Species analysis using HPLC-ICP-MS proofed that mainly carboplatin was present as intact drug in the influent and – due to low log K_D – in the effluent of the MBR.     

Determination of Nitrobenzene in Wastewater Using a Hanging Mercury Drop Electrode

The determination of trace amount nitrobenzene in wastewater on a hanging mercury drop electrode was studied. The determination conditions of pH, supporting electrolyte, accumulation potential, accumulation time, and voltammetric response were optimized. The sharp peak of the nitrobenzene was appeared at 0.05 V. The peak electric current was proportional to the concentration of nitrobenzene in the range of 1.47 × 10⁻⁵ ∼ 1.0 × 10⁻³ mol/l with relative standard deviations of 3.99 ∼ 8.94%. The detection limit of the nitrobenzene in water was 5 × 10⁻⁶ mol/l. The proposed method offered low limit of determination, easy operation, the use of simple instrumentation, high sensitivity and good reproducibility. It was applied to the determination of nitrobenzene in wastewater with an average recovery of 94.0% ∼ 105%. The proposed method provided fast, sensitive and sometimes real time detection of nitrobenzene.     

氨气敏电极法和纳氏试剂分光光度法对地表水中氨氮的比对测试

采用不同质量浓度的氨氮标准样品和实际样品,用氨气敏电极法和纳氏试剂分光光度法进行同步测试。结果表明,2种分析方法在水样氨氮质量浓度在0. 159～2. 81 mg/L范围内具有良好的可比性、精密性和准确性。氨气敏电极法的检出限为0. 03 mg/L,平行6次测定样品的相对标准偏差为0. 4%～4. 2%,加标回收率为85. 0%～110%;纳氏试剂分光光度法的检出限为0. 025 mg/L,平行6次测定样品的相对标准偏差为0. 5%～6. 4%,加标回收率为93. 0%～99. 8%。同时氨气敏电极法在样品预处理、试剂配制和分析时间上要优于纳氏试剂分光光度法。氨气敏电极法能够满足地表水自动监测在线比对实际工作的需求,该方法具有良好的适用性。     

聚苯乙烯/CdS/TiO_2双壳层核壳纳米颗粒可见光催化降解甲基橙

采用溶胶-凝胶法,在聚苯乙烯(PS)/CdS核壳纳米颗粒表面包覆致密TiO_2层,制备出具有双壳层结构的PS/CdS/TiO_2纳米复合颗粒,考察了制备条件对材料结构的影响,并利用甲基橙溶液对其光催化性能进行了评价。SEM、TEM、XRD和FTIR分析结果表明,制得的微球单分散性良好,壳层包覆完整,厚度均匀。PS/CdS/TiO_2制备的适宜反应时间为12~18 h,适宜反应pH为7~9。PS/CdS/TiO_2较PS/CdS具有更为优异的可见光催化性能。     

废水中甲基橙的电化学降解

以FTO导电玻璃作为阳极、石墨电极作为阴极电解模拟甲基橙废水,优化了工艺条件,并对甲基橙的降解机理进行了初步探究。实验结果表明,在NaCl投加量5 g/L、电压8 V、废水pH 6、初始甲基橙质量浓度6.0 mg/L的优化条件下电解30 min,废水的脱色率达91.3%,COD降低了62%。机理研究结果表明,电解产生的羟基自由基与甲基橙发生氧化还原反应,破坏了甲基橙的显色基团,使其内部某些化学键发生断裂,从而达到脱色的目的。     

检测水中有机磷农药的酶传感器

采用丝网印刷技术制作厚膜型电极,通过交联法将乙酰胆碱酯酶固定在电极上,开发快速检测水中有机磷农药的酶传感器.采用循环伏安法对电极所做的检测结果表明电极彼此间的差异在10%以内,具有较好的一致性.通过在交联剂、酶和底物等方面优化传感器的工作参数,确定了戊二醛、酶和底物的浓度分别为0.2%、0.5 mg/mL和10 mmol/L时,传感器响应最好.在交联固定酶的情况下,根据酶活受到有机磷抑制的原理,采用时间-电流法对特丁硫磷和对硫磷进行了检测.结果表明:这2种有机磷的检测限都可以达到1 ng/mL,线性区间1～10 000ng/mL.在物理吸附固定酶的情况下,采用循环伏安法对特丁硫磷进行了检测.结果表明:采用循环伏安法检测的灵敏度比采用时间-电流法的灵敏度要高.