MBR法/高级氧化技术在中水处理中研究进展

膜生物反应器(MBR)作为一种新型高效的污水处理方法,正受到人们的广泛关注。同时由于高级氧化技术在处理污水过程中无二次污染、易控制,与其他处理过程相结合可提高处理能力,降低处理成本等优点也备受研究者亲睐。本文系统介绍了MBR法的定义、分类、优势及其发展趋势,并对高级氧化技术和中水做了简单说明,阐述了高级氧化技术在膜生物反应器(MBR)中的应用,同时列举了两种工艺相结合在中水处理领域中的作用和地位。     

污水处理厂AB法工艺改造方案的探讨

针对漳州市东区污水处理厂AB法工艺改造的目标,分析了AB法工艺的局限性,结合该污水处理厂AB法工程的现有设施,从技术上探讨了5种具有脱氮除磷功能的工艺改造方案的可行性,并得到了适合于该污水处理厂AB法工艺改造的方案。     

微生物法处理海上钻井废钻井液

微生物法适用于海上钻井含油废弃物的处理。通过多次对菌株采集、分离、纯化和培养驯化,选育得到了3株对石油烃类有很好降解效果的石油类降解菌;确定了石油类降解菌适宜的生化处理条件:最佳生长及原油降解温度为50℃、最佳生长及原油降解酸碱性环境为pH=6.0、最佳菌株接种量2%、最佳原油初始浓度为500mg/L。处理后的含油废弃钻井液含油量基本稳定在2mg/L以下,降解率达98%以上。     

油田压裂返排液处理技术实验研究

油气井压裂作业过程中产生的压裂返排液已成为当前油田水体的主要污染源之一。文章对吉林油田公司压裂返排液处理工艺进行了实验研究。结果表明:在采用絮凝、微波强氧化、活性炭毡处理、纳滤/反渗透集成处理工艺后,压裂返排液CODCr可以达到GB 8978-1996《污水综合排放标准》一级标准要求。该研究为压裂返排液处理装置的设计和现场实施提供了实验基础。     

新农村建设污水处理工程实例

山海关区新民居污水治理工程采用水解酸化+接触氧化+曝气生物滤池为主的工艺进行污水治理,实际运行结果表明:系统运行稳定,处理出水COD≤48 mg.L-1,BOD5≤9 mg.L-1,SS≤10 mg.L-1,NH3-N≤4.5 mg.L-1,TP≤0.47 mg.L-1,处理出水达到《城镇污水处理厂污染物排放标准》(GB 18918-2002)一级A标准,出水用于农村绿化和农灌,经济效益和环境效益明显。     

Chlorinated solvents in a petrochemical wastewater treatment plant: an assessment of their removal using self-organising maps

The self-organising map approach was used to assess the efficiency of chlorinated solvent removal from petrochemical wastewater in a refinery wastewater treatment plant. Chlorinated solvents and inorganic anions (11 variables) were determined in 72 wastewater samples, collected from three different purification streams. The classification of variables identified technical solvents, brine from oil desalting and runoff sulphates as pollution sources in the refinery, affecting the quality of wastewater treatment plant influent. The classification of samples revealed the formation of five clusters: the first three clusters contained samples collected from the drainage water, process water and oiled rainwater treatment streams. The fourth cluster consisted mainly of samples collected after biological treatment, and the fifth one of samples collected after an unusual event. SOM analysis showed that the biological treatment step significantly reduced concentrations of chlorinated solvents in wastewater.     

Removal of tetrabromobisphenol A by conventional activated sludge, submerged membrane and membrane aerated biofilm reactors

The goal of this study was to compare removal efficiencies of tetrabromobisphenol A (TBBPA) using typical wastewater treatment technologies, and to identify the most significant mechanisms of removal. Two types of municipal wastewater reactors were studied: a full-scale conventional activated sludge (CAS) reactor with tertiary treatment; and three pilot-scale membrane bioreactors (MBRs) having different sludge retention times (SRTs). All four reactors were fed the same influent. A third reactor type, a membrane aerated biofilm reactor (MABR) was fed tap water, ammonia, and TBBPA. TBBPA in municipal influent ranged from 1 to 41 ng L⁻¹ (n = 10). The CAS effluent had an average TBBPA concentration of 0.7 ± 1.3 ng L⁻¹ (n = 3). Effluent concentrations from the MBRs were an average of 6 ± 6 ng L⁻¹ TBBPA (n = 26). Significant TBBPA removal was observed in the MABR throughout the 5 week of study (p ? 0.05). Removal of TBBPA from wastewater treatment was found to be due to a combination of adsorption and biological degradation. Based on experimental results, nitrification is likely a key process therein. No significant relationship between removal of TBBPA and SRT was identified (p ? 0.05).     

原位热处理技术修复重质非水相液体污染场地研究进展

重质非水相液体(DNAPLs)是土壤及地下水中广泛存在的有机污染物,原位热处理技术是目前修复受DNAPLs污染土壤及地下水的最具潜力的技术之一。综述了国内外常用原位热处理技术的基本原理及其影响因素,介绍了相关现场应用实例,并展望了该技术未来的应用前景和发展趋势,以期为中国污染土壤及地下水的原位修复提供有益借鉴。     

改性多壁碳纳米管对水中Cd~（2＋）的去除

为了增加多壁碳纳米管（multiwall carbon nanotubers,MWNTs）对水中Cd2＋的吸附量,使用混酸对多壁碳纳米管进行氧化处理,采用红外光谱进行结果表征,并探讨了吸附时间、pH值和MWNTs的使用量、Cd2＋的浓度及干扰离子对镉离子吸附的影响。结果表明,吸附时间为1.5 h、pH为5.3、吸附效果最佳,随MWNTs量的增加Cd2＋去除量增加,共存的阳离子会降低对Cd2＋的吸附效果,对Cd2＋的吸附符合Longmuir吸附定律。研究同时表明,pH小于2时Cd2＋能容易从碳纳米管上解吸。初步探讨了Cd2＋吸附机制。     

几种不同处理方法对活性炭表面化学性质的影响

活性炭表面官能团的种类和数量决定了活性炭的表面化学性质,而化学性质决定了活性炭的表面吸附特性。使用5种常见的处理方法处理活性炭,采用Boehm滴定法,XPS对活性炭进行表征,通过单因素实验系统地考察了活性炭表面含氧官能团及碱度随处理条件的变化,同时通过碱度变化讨论了部分处理方法对于原活性炭表面灰分的去除。结果表明:在处理液150 mL、20℃、200 r/min条件下:50 g活性炭经0.01～5 mol/L HCl处理4 h,活性炭表面碱度降低范围63.2%～76.5%,灰分去除效果好,低浓度的盐酸就能达到较好的灰分去除效果,活性炭表面没有形成大量的含氧官能团;在HNO3浓度1～12 mol/L、处理时间1～8 h、活性炭量25～75 g条件下处理后总碱度降低显著,灰分去除效果优于HCl处理,HNO3氧化作用使活性炭表面形成了大量含氧官能团,总酸度、羧基、内酯基、酚羟基含量均相对于原活性炭增加明显;在H2O2质量浓度5%～20%、处理时间0.5～4 h、活性炭量25～75 g条件下处理后碱性灰分去除不好,活性炭表面没有形成大量含氧官能团,H2O2处理引起活性炭表面化学性质变化较小;在NaOH浓度0.1～2 mol/L、处理时间1～8 h、活性炭量25～75 g条件下处理后碱度增加明显,酸度减小明显,羧基、酚羟基含量降低。50 g活性炭在微波功率100～500 W、处理时间2～10 min、载气流量600～1 400 mL/min条件下经微波处理后,微波热效应导致含氧官能团分解,总碱度增加,总酸度下降,羧基含量、内酯基含量降低,酚羟基含量因条件的不同而变现出不同的变化。