生物膜与A/O工艺耦合快速降解氨氮

应用由城市污水处理厂序批式间歇反应器(SBR)中筛选得到的4株特殊氨氧化菌,分别在SBR和有回流的生物膜与A/O工艺耦合体系培养中,考察其降解低碳高氨氮废水的功能.结果表明,自养硝化与异养氨氧化菌的混合菌群较单一自养硝化菌株降解氨氮速率快;在生物膜与A/O工艺耦合系统中,自养硝化与异养氨氧化菌协同代谢加速氨氮氧化脱除,氨氮脱除速率远比SBR系统快.对生物膜与A/O工艺耦合系统中氨氮脱除动力学进行了研究,模拟了NH4 、NO2-质量浓度与氨氮脱除比速率之间的关系,模型得到了较好的验证.     

高频电晕放电等离子体法处理甲醛的研究

采用高频电晕等离子体法进行去除甲醛气体的试验研究.主要考察了甲醛气体处理效果与电源频率和停留时间的关系,并进行了无填料、填加亚硝酸钠填料和钛酸钡填料对甲醛气体处理效果的对比试验.结果表明,高频电晕放电等离子体法可有效地实现对甲醛气体的去除.电源频率越高,停留时间越长,甲醛的去除效果越好;在相同条件下有填料填加对甲醛气体的去除效果优于无填料填加的去除效果;钛酸钡填料优于亚硝酸钠填料的去除效果;在电源频率为55 kHz、流量0.3 m3·h-1、进口浓度12 mg·m-3钛酸钡填料存在的条件下对甲醛的去除效率接近100%.     

滑动弧放电等离子体裂解正己烷实验研究

考察了一种新型低温等离子体发生方式滑动弧放电对正己烷的裂解效果,检测了主要裂解产物,并分析了供给电压、正己烷初始浓度、电极材料和反应器结构对裂解率的影响.结果表明,该法可以有效处理正己烷,最高裂解率达96%.在空气中的主要裂解产物为CO2、CO、NO2和H2O.增大供给电压可以提高正己烷裂解率;初始浓度增大后裂解率下降,但绝对处理量增大;相同能耗情况下,采用铁电极时能量利用率最低,正己烷裂解率低于铝电极和铜电极;电极最小间距和喷嘴直径之间的比例关系影响裂解效果,优化两者的匹配关系可以提高裂解率.     

YSZ-W复合涂层的制备及抗烧蚀性能研究

目的 在TC4表面制备均匀致密的YSZ-20％(体积分数)W(ZW2)复合涂层,以提高其抗烧蚀性能,并对其在超音速燃流中的烧蚀响应机制进行初步探究.方法 以8YSZ和W粉为原料,采用喷雾干燥-真空烧结工艺制备喷涂用ZW2复合粉末,利用大气等离子喷涂技术(APS)制备ZW2复合涂层,采用超音速火焰冲刷法(SCF)测试涂层...     

远程氮等离子体改性活性炭纤维及其吸附性能研究

采用远程等离子体方法对活性炭纤维(ACF)进行表面功能化改性。研究了放电参数(放电时间、氮气压力、放电功率)与远程位置对ACF减重率及吸附性能的影响。结果表明,远程氮等离子体中的电子、离子对试样的刻蚀作用被抑制,远程等离子体改性后的ACF比未改性的ACF以及放电区的吸附剂对结晶紫的去除效果要好。ACF经过远程氮等离子体改性后,表面出现羧基,增加了其表面酸性含氧官能团,从而增强了对碱性染料结晶紫的吸附能力。当氮气压力10Pa、放电功率60W、放电时间100s时,在远程区80cm处经改性后的ACF的吸附性能最佳。     

微波消解ICP-AES法测定土壤及底泥等中常量及微量元素

建立了电感耦合等离子体发射光谱法同时测定土壤及底泥等中的铜、铅等多元素方法,采用水平及垂直双向观测,提高了分析灵敏度。对ICP工作参数选择、酸度对测定的影响、元素分析线选择、元素间光谱干扰校正系数的确定以及背景扣除方式等进行了研究。该方法线性范围宽,精密度及准确度较好,检出限低,多元素同时分析,分析速度快,操作简便。用于实际样品的测定,结果满意。     

高等植物细胞中的钙通道

钙通道在高等植物细胞中参与众多的信号转导过程,对钙通道的研究最近几年获得长足的进步：不仅在质膜中直接发现了电位依赖性的钙通道、牵张刺激激活的机械敏感性钙通道等,而且在液泡膜中发现了众多具有不同开放调控机制的钙通道：受化学信使控制的钙释放通道、电位依赖性钙通道、钙离子诱导的钙释放通道．本文对高等植物细胞中钙通道的研究进行了综述     

生物酶催化技术在垃圾渗滤液处理中的应用

针对垃圾渗滤液的特性及目前处理工艺普遍无法达标的问题,提出应用生物酶催化技术处理垃圾渗滤液的方法,可以高效迅速降解污染物,提高污染物去除效率,减少投资及处理费用,为垃圾渗滤液处理的技术升级与工艺探索提供新思路。     

Comparison of Catalytic Degradation of Aniline by Immobilized Iron Oxide Catalysts

Abstract In this study, iron oxides immobilized onto silica and alumina granular carriers in a fluidized-bed reactor were applied as silica granule (SG) and alumina granule (AG) catalysts, respectively; the SG and AG catalysts were used to explore the catalytic decomposition of H2O2. Effects of H2O2 concentration and temperature on the oxidation of aniline were determined to compare the reactive efficiencies of the SG and AG catalysts. Results showed that H2O2 decomposition could be efficiently catalyzed by the SG and AG catalysts. Degradation rates of aniline increased with increasing H2O2 concentration and temperature in both catalyst systems. The AG catalyst (smaller particle size) had more surface sites for precipitation of iron oxide than the SG catalyst (larger particle size). Consequently, in the initial stages of the reaction, hydroxyl radicals (?OH) were generated more rapidly with the AG catalyst than with the SG catalyst and the degradation of aniline by the AG catalyst was faster than that by ...     

Experimental studies of removing typical VOCs by dielectric barrier discharge reactor of different sizes

This research conducted both lab-scale and pilot-scale tests by selecting toluene as the typical volatile organic compounds (VOCs) and by using the promising non-thermal plasma oxidation technology – dielectric barrier discharge (DBD). To develop baseline engineering data to demonstrate the feasibility of application of self-made DBD reactors, the peak voltage, gas flow speed, initial toluene concentration, discharge frequency and duty ratio were studied. The results showed that toluene removal efficiency improves with increase of electrical voltage, frequency and duty ratio, and declines with increase of polar distance, gas flow speed and toluene initial concentration. When the voltage increases, the energy efficiency rises first and then drops. The energy efficiency reaches the climax when the energy density reaches 150.8 J/L and 101.7 J/L in the lab-scale experiment and pilot-scale experiment respectively.