Thermodynamics and kinetics of cadmium adsorption onto oxidized granular activated carbon

Cadmium sorption behavior of granular activated carbon oxidized with nitric acid was systematically studied by sets of the equilibrium and time-based experiments under various conditions.The cadmium adsorption capacity of oxidized granular activated carbon enlarged with an increase in pH,and reduced with an increase in ionic strength.Experimental data were evaluated to find out kinetic characteristics.Adsorption processes were found to follow pseudo-second order rate equation.Adsorption isotherms correlate well with the Langmuir isotherm model and the maximum sorption capacity of cadmium evaluated is 51.02μmol/g.Thermodynamic parameters were calculated based on Van't Hoff equation.Equilibrium constant Kd was evaluated from Freundlich isotherm model constants,Langmnir isotherm model constants,and isotherms,respectively.The average change of standard adsorption heatΔH~0 was -25.29 kJ/mol.NegativeΔH~0 andΔG~0 values indicate the adsorption process for cadmium onto the studied activated carbon is exothermic and spontaneous.The standard entropyΔS~0 was also negative,which suggests a decrease in the freedom of the system.     

Anaerobic tapered fluidized bed reactor for starch wastewater treatment and modeling using multilayer perceptron neural network

Anaerobic treatability of synthetic sago wastewater was investigated in a laboratory anaerobic tapered fluidized bed reactor(ATFBR) with a mesoporous granular activated carbon(GAC)as a support material.The experimental protocol was defined to examine the effect of the maximum organic loading rate(OLR),hydraulic retention time(HRT),the efficiency of the reactor and to report on its steady- state performance.The reactor was subjected to a steady-state operation over a range of OLR up to 85.44 kg COD/(m~3.d).The COD removal efficiency was found to be 92% in the reactor while the biogas produced in the digester reached 25.38 m~3/(m~3·d) of the reactor. With the increase of OLR from 83.7 kg COD/(m~3.d),the COD removal efficiency decreased.Also an artificial neural network(ANN) model using multilayer perceptron(MLP)has been developed for a system of two input variable and five output dependent variables. For the training of the input-output data,the experimental values obtained have been used.The output parameters predicted have been found to be much closer to the corresponding experimental ones and the model was validated for 30% of the untrained data.The mean square error(MSE)was found to be only 0.0146.     

Denitrification potential enhancement by addition of external carbon sources in a pre-denitrification process

The aim of this study is to investigate the denitrification potential enhancement by addition of external carbon sources and to estimate the denitrification potential for the predenitrification system using nitrate utilization rate （NUR） batch tests. It is shown that the denitrification potential can be substantially increased with the addition of three external carbon sources, i.e. methanol, ethanol, and acetate, and the denitrification rates of ethanol, acetate, and methanol reached up to 9.6, 12, and 3.2 mgN/（g VSS.h）, respectively, while that of starch wastewater was only 0.74 mgN/（g VSS,h）. By comparison, ethanol was found to be the best external carbon source. NUR batch tests with starch wastewater and waste ethanol were carried out. The denitfification potential increased from 5.6 to 16.5 mg NO3-N/L owing to waste ethanol addition. By means of NUR tests, the wastewater characteristics and kinetic parameters can be estimated, which are used to determine the denitrification potential of wastewater, to calculate the denitrification potential of the plant and to predict the nitrate effluent quality, as well as provide information for developing carbon dosage control strategy.     

基于航空摄影测量的填埋堆体动态重构精度及影响因素

填埋堆体表面形变监测是填埋场库容管理和堆体失稳等风险分析的核心,其时空高分辨率监测研究近年来引起广泛关注。基于航空摄影的地表测量技术具有采集速度快、时空分辨率高等优点,但在填埋场特殊环境下,面对高频填埋活动、显著的堆体变化以及防雨膜覆盖等干扰时,要同时满足高时空分辨率和耗时短的动态监测要求,无人机的最佳飞行参数设定亟待研究。为此,该研究模拟中等规模危险废物填埋场的规模和日填埋量,利用专业级无人机获取模拟区域图像,空三加密处理生成三维点云数据,利用Arcmap叠加分析多期监测数据,从点位坐标、重构尺度、重构体积、体积差分精度4个角度分析重构误差。结果表明:三维重构的坐标精度可以达到米级;重构尺度误差为2~3 cm,重构体积误差为0.16~0.17 m³,差分体积误差为0.16~0.17 m³;进一步研究发现,高度为25~55 m时,高度越高精度越低,相机倾角为[-53°,-60°]时,精度最高,旁向重叠率大于80%时,误差骤减且基本稳定。考虑到填埋场的填埋作业间隔、无人机续航能力等对飞行时间的约束,为获得最佳精度,建议无人机飞行高度为37 m、相机倾斜角度为[-53°,-60°]、旁向重叠率为80%。     

UNCERTAINTY OF EXTREME FLOOD ESTIMATES INCORPRATING HISTORICAL DATA1

ABSTRACT: The ability to predict extreme floods is an important part of the planning process for any water project for which failure will be very costly. The length of a gage record available for use in estimating extreme flows is generally much shorter than the recurrence interval of the desired flows, resulting in estimates having a high degree of uncertainty. Maximum likelihood estimators of the parameters of the three parameter lognormal (3PLN) distribution, which make use of historical data, are presented. A Monte Carlo study of extreme flows estimated from samples drawn from three hypothetical 3PLN populations showed that inclusion of historical flows with the gage record reduced the bias and variance of extreme flow estimates. Asymptotic theory approximations of parameter variances and covariances calculated using the second and mixed partial derivatives of the log likelihood function agreed well with Monte Carlo results. First order approximations of the standard deviations of the extreme flow estimates did not agree with the Monte Carlo results. An alternative method for calculating those standard deviations, the “asymptotic simulation” method, is described. The standard deviations calculated by asymptotic simulation agree well with the Monte Carlo results.     

AQUIFER PARAMETERS FROM CONSTANT DRAWDOWN NONSTEADY-LEAKY TYPE CURVES1

ABSTRACT: A drain function and set of type curves were defined for the mathematical solution that represents one-dimensional flow under nonsteady conditions in a leaky aquifer for the constant drawdown boundary condition. A match point procedure was developed for determining the aquifer parameters transmissivity, storage coefficient, and leakance based on the drain function and type curves. Use of the procedure is illustrated by an example that utilizes simulated aquifer drawdowns and flowrate data. The drain function and type curves developed in this investigation include the effects of leakage for the constant drawdown boundary condition, which is not included in the existing drain function and type curve found in the literature. Thus, a new set of type curves was developed that can be used to analyze drawdowns for one-dimensional flow in a leaky aquifer with constant drawdown at a line sink. Applications would include flow to a canal or river, drainage of agricultural lands, and dewatering associated with strip mining operations.     

金刚石钻进规程的实验室模拟及参数校核

金刚石钻进的钻进规程决定了钻进效率和钻头的使用寿命，也决定了钻进的安全性、可靠性和经济效益。因此，选择最佳的钻进规程尤其重要。本文通过智能微钻实验台对金刚石钻进的模拟钻进参数及其变化曲线、参数值，以及对应的钻进速度、进尺变化曲线、参数值进行分析，得到相应岩石条件下的最优钻进规程。     

Effects of temperature on population growth and intake of food by the army worm, Mythimna separata (Walker)

Population life tables of the army worm, Mythimna separata, were constructed and nutritional parameters of food for the larvae were examined at 5 temperatures from 16℃ to 32℃. The temperature suitable for growth and reproduction of the insect ranged from 20℃ to 28℃ with the optimum of 24℃. Their survivalship and fecundity were much poorer at 32℃ than at 16℃. Indices of population trend of the insect at these temperatures could well fitted with the parabolic curve which theoretically indicated that the population density would multiply by some 660 after one generation circle at the optimal temperature, 22.6℃, and it would decline at temperatures higher than 32.9℃ or lower than 12.3℃. Larval food intake and their AD tended to go up while their ECI and ECD to go down with a rise in temperature. These alterations in population size and feeding behavior caused by temperature would exert an important effect on their damage to crops.     

我国城市污水几种处理工艺简介

介绍了近年来城市污水处理工程中常见的几种处理工艺和主要设计参数。     

Performances of the cotton bollworm,Heliothis armigera (Hubner) at different temperatures and relative humidities

The cotton bollworm, Heliothis armigera (Hubner) is an important insect species at-tacking many crops. Their performances have been examined at temperatures from 15℃ to 35℃ and relative humidities (RH) between 22.5% and 100%, respectively, in order to assess possible effect of climate in future on its occurrence and infestation. Durations of all developmental stages of the insect shortened with increasing temperature. The temperature favoring population growth ranged from 25℃ to 30℃.Larval duration and adult longevity decreased as relative humidity increased, but development of other stages was independent of RH. At RH of over 64%, their survival rate, egg production and oviposition rate varied a little, and all the population parameters of the insect remained at a relative constant level.